PRIMETOOLS T4755 Electricians Specialist Tools Instruction Manual
- June 17, 2024
- PRIMETOOLS
Table of Contents
PRIMETOOLS T4755 Electricians Specialist Tools
Product Information
Specifications
- Mainstester: 120-250V AC
- Voltage: 1000V-1500V
- Material: Zinc phosphate coated tough alloy steel
- Length: Various lengths ranging from 65mm to 190mm
- Handle: Soft grip, tri-lobe handle for comfort and control
Product Usage Instructions
Mainstester
The mains tester is used to check the presence of voltage in electrical circuits. Follow these steps to use it:
- Ensure the mains tester is insulated for protection.
- Insert the tip of the mains tester into the electrical outlet or wire terminal.
- If the neon light on the mains tester lights up, voltage is present.
Conduit Bush Wrench
The conduit bush wrench is designed for tightening/untightening conduit bushes. Here’s how to use it:
- Select the appropriate size of the wrench head for the conduit bush.
- Place the wrench over the conduit bush and tighten or loosen as needed.
- The soft grip handle provides comfort and control during use.
Punch Down Tool
The punch-down tool is used for seating data wires into terminals. Follow these steps for usage:
- Select the appropriate terminal block type for the tool.
- Insert the data wire into the terminal and press down firmly for automatic seating.
- Use the wire extractor hook if needed to remove excess wires.
MC4 Solar Spanners
The MC4 solar spanners are designed for specific solar applications. Here’s how to use them:
- Select the correct spanner based on the voltage requirement (1000V or 1500V).
- Use the spanners to securely connect or disconnect MC4 solar connectors.
Heavy Duty Mainstester
The heavy-duty mainstester is suitable for long reach applications. Follow these steps for usage:
- Ensure the mainstester is insulated for protection.
- Use the extended shaft to reach distant electrical points.
- The neon light indicates the presence of voltage when testing.
Electrical Installation
Conduit Bush Wrench
Innovative head design allows for all sizes of conduit bushes to be tightened/untightened even with cabling in place. Zinc phosphate coated, tough alloy steel for increased strength and durability. Soft grip, tri-lobe handle for exceptional comfort and control.
Punch Down Tool
For the fast and secure seating of data wires into terminals. Suitable for a wide range of terminal block types. One step action for automatic seating & trimming of excess wires. Handle includes wire extractor hook & flat head spudger.
MC4 Solar Spanners
Performance: The perfect solution to tighten and disassemble MC4 connectors
used in the installation of photovoltaic equipment. Easy to use: Simply insert
the spanner pins into the securing clips of the two connectors, release and
gently pull apart to separate the two connectors. Durable: Manufactured from
reinforced plastic which is durable, light and easy to carry. Universal:
Suitable for all common connectors used
to extend photovoltaic lines of solar panels, photovoltaic connectors,
photovoltaic solar cables, solar generators and solar line connectors.
Mainstesters
Mainstester – 120-250V AC
Insulated for protection. Neon light for high visibility. Pocket clip.
VDE Mainstester – Pocket Clip
VDE-approved mains tester for assured safety. Neon light for high visibility.
Pocket clip.
DIN 57680 -6 VDE 680 -6 – Cert no 40011575
VDE Mainstester – 125-250V AC
Premium quality VDE approved for assured safety. Neon light for high
visibility. Finger slip guard for added safety. Integrated pocket clip.
DIN 57680 -6 VDE 680 -6 Cert No 109826 Long Mainstester – 120-250V AC
VDE approved mainstester for assured safety. Neon light for high visibility.
Pocket clip.
DIN 57680 -6 VDE 680 -6 Cert No 40016094
Heavy Duty Mainstester – 120-250V AC
Extended shaft for long reach applications. Insulated for protection. Neon light for high visibility.
Frequently Asked Questions (FAQ)
Q: How do I know which size of conduit bush wrench to use?
A: The innovative head design of the wrench allows it to adjust to all sizes of conduit bushes. Simply select the appropriate head size for your specific bush.
Q: Can I use the punch down tool for all types of data wires?
A: The punch down tool is suitable for a wide range of terminal block types and can be used for most data wires. Ensure compatibility with your specific wire type before use.
Q: Are the mainstesters safe to use with high voltages?
A: The VDE-approved mainstesters are designed for safety and can be used with voltages up to 250V AC, providing assured protection during electrical testing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>