OWL Labs WBC100 Whiteboard Camera User Manual
- June 6, 2024
- OWL Labs
Table of Contents
OWL Labs WBC100 Whiteboard Camera
Safety & Troubleshooting
Safety, compliance, troubleshooting, and other important product information regarding your Meeting Owl™ can be found online at www.owllabs.com/support.
Power Supply
For power, use a UL Listed power supply marked “LPS” or “Class 2” with output rated 12 VDC, 1 A.
Model Number: WBC100
Operating Temperature : 0˚-35˚C Ambient
Client
Owl Labs
Project
501054-01-OLL OLL-Hummingbird
Designer
Lau
| Date
11/16/2020
LD Part Number
107415-02-OLL
| Revision
0
| # per Set
0
Description
Document Bundle
Revision Description
Notes 1. (x4)
2. Stapled Booklet 3.
Nominal Length, Width, & Depth (if applicable)
141.50 146.00 0.00 mm
Net Blank Size (if applicable)
283 * 146 mm
Material Description
100gsm Wood-free Paper Coated 2-sides (0.11mm/4pt)
Corrugation/Grain (if applicable)
horizontal
Print Instructions
Offset 3C/Offset 3C
Secondary Finishing
/
Rule (if applicable)
1004 mm
| Adhesive
0 mm
View
outside
Unit
millimeters
| Scale
1
Characteristics
Line Type Legend Construction (do not tool)
Annotation (do not tool) Cut
Crease
PROPRIETARY and CONFIDENTIAL:
The information contained in this drawing is the sole property of Lihua Direct, LLC. Any reproduction in part, or as a whole with the written permission of Lihua Direct, LLC. is prohibited.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected
- Consult the dealer or an experienced radio/TV technician for help
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference
- This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled envi-ronment. This equipment should be installed and operated
with a minimum distance 20cm between the radiator & your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. Country Code selection feature to be disabled for
products marketed to the US/CANADA The device for operation in the band
5150–5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems Operation of this device
is restricted to indoor use only
PROPRIETARY and CONFIDENTIAL
The information contained in this drawing is the sole property of Lihua
Direct, LLC. Any reproduction in part, or as a whole with the written
permission of Lihua Direct, LLC. is prohibited.