EVJUICION 1-2 EV AC Charging Pile User Manual

EVJUICION 1-2 EV AC Charging Pile

Welcome

Thank you for choosing our electric vehicle charger.

This EV charger supports smart charging with a smart control APP, which can be accessed through optional WIFI or Bluetooth. It includes features such as remote start/stop, reservation, setting the output current, and monitoring the charging status, among others.

Please use your SMARTphone to scan the following QR code and download the latest APP.

This documentation provides general descriptions and technical characteristics of our products’ performance. However, it is not intended as a substitute for determining the suitability or reliability of these products for specific user applications. Users must perform appropriate and comprehensive risk analysis, evaluation, and testing of the products concerning their relevant specific application or use.

Our company is not liable for any misuse of the information herein. If you have suggestions for improvements or amendments or have identified any errors in this publication, please notify us.

Reproduction of this document, except for personal, non-commercial use, requires written permission from our company. Hypertext links to this document are prohibited.
Please consult this document at your own risk, using a non-exclusive license. All other rights are reserved.

To ensure safety and compliance with regulations, please follow all relevant state, regional, and local safety regulations when installing and using this product. Only the manufacturer should conduct repairs to components to maintain adherence to documented system data and for safety reasons.

When using these devices for applications with specific technical safety requirements, be sure to follow the relevant instructions for proper operation and safety. Ensure to use our company’s software or approved software with our hardware products to avoid injury, harm, or improper operation.

Safety Information

Before using or maintaining this product, it is important to read the following safety instructions carefully. Failure to follow and implement all the specified instructions and procedures may invalidate the warranty, and therefore our company will not be liable for any claims.

• Do not open the charger.
• Do not use the charger if it is damaged.
• Do not use an extension lead on the charging cable.
• Do not touch or insert foreign objects into the plugs.
• Do not install the charger near flammable, explosive, or combustible materials.

• The charger must be kept out of reach of children.
• The EV charger must be connected to a protective earth conductor.
• The electrical installation must comply with all local applicable safety requirements, standards, and guidelines.
• No modifications should be made to the EV charger.
• Components should not be changed or replaced by the end-user or unqualified personnel.

Product Overview

Our EV chargers are designed to provide a smart, stable, and reliable charging experience for electric vehicle owners.

Main Features of the Products

➢ LED Charging Indicator:

Model Description

List of Accessories

• 1* Carry Bag
  

• 1* Portable EV Charger
  

• 1* User Manual

Main Technical Parameters

voltage protection, Over-current protection, Leakage protection, Grounding remind, Temperature protection, Waterproof protection, Power-off protection,
Data protection.
warranty| two years

Insulation Resistance:
The insulation resistance between the input loop and ground, output loop and input to output of the charging station is ≥ 10MΩ.

Installation Instructions

All work on the equipment must only be carried out by qualified personnel who have read and fully understood all safety information and installation requirements contained in this manual.

Installation Environment Requirements

1. This AC smart charging station are suitable for outdoor application with its TYPE-3R structure.
2. Please ensure that the ambient temperature is in the range of -25℃to + 5 0 ℃.

Do not mount the EV charger in areas containing highly flammable materials or gases. Do not mount the EV charger in potentially explosive atmospheres.

Before Installation

1. Make sure an appropriate MCB (Main Circuit Breaker) is installed upstream of the AC power supply to the charger.
2. Use protection. The selected circuit protection device must integrate the appropriate residual current device (RCD) and the corresponding electrical load overcurrent protection device.
   Use copper cables that comply with local wiring regulations. The selected cable must be able to withstand a continuous load of up to 50A for each period。

Smart Phone APP User Guide

(with optional WIFI/Bluetooth module)

1. To obtain the APP User Guide, please use your smart phone to scan the following QR code.
   

Charger User Guide

Charge Control

1. When the AC power is connected, and the charging gun is not inserted, the LED indicator remains steady blue, indicating standby mode.
2. To start charging, use your mobile phone to scan the two-dimensional code on the charging gun. The two-dimensional code is affixed to the rear cover of the charging pile and supports scanning ( APP download ).

Charging State

After inserting the charging gun, the blue light will stay steady on. Once you connect to the APP, click on the “Quick Charging” option on your phone screen, and the LED light of the charging pile will turn green with a breathing effect.

Attention:
Don’t unplug the EV Charger before the charging is completed, as there’s risk of electric shock.

Error Codes

1. Before charging and starting, the following detection should be performed: ground leakage, relay adhesion, over-current, over-voltage, under-voltage, and overtemperature detection. If any of these values exceed the set limit, an error will be reported.
2. After the charging starts, if an error occurs, it will be reported on the portable pile, and the LED indicator of the charging pile will be steady red.

switch. Warranty service is required if errors persist.
E03| Input over voltage| Wait for the voltage to return to normal
E04| Input under voltage| Wait for the voltage to return to normal after use
E05| Over current protection| Unplug the charging gun and reset the safety switch.
E06| EV Charger is abnormal| Reinsert the charging gun.
E09| Fire-zero line reverse connection| Check whether the live and neutral wires are reversed.
E12| Charging pile temperature is too high| Turn off the air switch and use it after the temperature returns to normal.
E20| Relay open circuit| Unplug the charging gun and reset the safety switch. Warranty service is required if errors persist.
E21| Relay bonding| Unplug the charging gun and reset the safety switch. Warranty service is required if errors persist.
E22| Relay temperature is too high| Turn off the air switch and use it after the temperature returns to normal.

Recycling and Disposal

1. This device is intended for charging electric vehicles and is subject to the EU directive 2012/19/EU on waste electrical and electronic equipment (WEEE).
2. Disposal of this device must be carried out in accordance with the national and regional regulations for electrical and electronic equipment.
3. Old devices and batteries should not be disposed of with household waste or bulky waste. Before disposing of the device, it should be rendered inoperable.
4. Dispose of the packaging material in the region’s designated collection container for cardboard, paper, and plastics.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>