Flycam FLN-MSTR-EGV1 Flowline Master with Edge V1 Stabilization Arm Instruction Manual
- June 17, 2024
- FLYCAM
Table of Contents
Flycam FLN-MSTR-EGV1 Flowline Master with Edge V1 Stabilization Arm
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Flowline Master with Edge Setup
NOTE
It is recommended to attach the minimum required weight (4kg / 8lb) for
pulling down the balancing rope to ensure proper operation of your Flycam
Flowline system.
- Loosen the screw of the Camera Hook attached to the Flowline Support Arm using the Allen key.
- Similarly, remove the second screw.
- Now, remove the Hook from the Flowline Support Arm.
- As shown in the image, take the cord bundle out from the Cup and pull the Cord until a Cord lock comes out.
- Separate the Cord and the Cord lock.
- Keep the lock aside to re-attach it later.
- Similarly, separate the Cord from the Cup to mount it back later.
- To detach the Flowline Support Rod, pull it upwards.
- Dissemble the Camera Hook and the Support Rod from the Vest.
- To detach the extension from the Support Rod of the Vest, remove its screw using a screwdriver.
- Detach the extension from the Support Rod and align the cord with the height riser, as shown in the image.
- Attach the extension with the height riser and push it inside.
- Feature: Height riser that offers up to 4″ of vertical extension for taller operators and a lockable hook to secure any camera, gimbal, or cage effortlessly.
- Insert a screw in the Support rod and tighten it using the screwdriver.
- Similarly, tighten the top screw using the screwdriver.
- Loosen the knob of the Flowline Edge.
- After loosening the knob, remove it and pull the rod of Flowline Edge to open it.
- Feature: The Foldable Design of Flowline Edge makes it easier to store.
- After opening the Rod, insert the knob and properly tighten it, as shown in the image.
- Feature: Tension adjustment knob to match your rig’s weight, while the adaptable sliding knob adjusts the support rope to your unique filming needs.
- Insert the cord of the Flowline vest in the Flowline Edge.
- After inserting the cord in the Edge, pull the cord from the side of the Rod.
- The property attaches the Edge to the flowline vest.
- Feature: it attaches to your Flowline Body Worn Systems like Basic Flowline Hanger and master flowline hancer. and series hanger 3DON, 400N & 500N) to provide Smooth Floating Shots with utmost comfort.
- After inserting the cord in the Cup, pull it outwards and insert it in the cord lock.
- After inserting it into the Cup, be it cover iv with the cord lock.
- Attach the Camera Hook to the Cup.
- Insert the screw into the Camera Hook and secure it properly using an Allen key.
- The Flowline Edge is fully assembled with the Stabilization Arm. The versatile belt system moulds to fit all body types.
180° Rotation
Adjust Camera Setup Position
YOUR FLYCAM FLOWLINE MASTER WITH EDGE V1 STABILIZATION ARM IS ALL DRESSED UP AND READY TO GO!
Warranty: We offer a one-year warranty for our products from the date of
purchase. Within this period, we will repair it without charge for labour or
parts. Warranty doesn’t cover transportation costs nor does it cover a product
subjected to misuse or accidental damage. Warranty repairs are subjected to
inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, or lack of
care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>