ViewSonic LX700-4K Series DLP Projector User Guide
- June 17, 2024
- Viewsonic
Table of Contents
ViewSonic LX700-4K Series DLP Projector
Specifications
- Model: LX700-4K Series
- Type: DLP Projector
- Resolution: 4K
- Input Ports: HDMI 1, HDMI 2
- Power Supply: 100-240 Vac, 50/60 Hz
- Additional Ports: eARC, 12V Trigger, RS232, USB 5V/1.5A (Service), Audio Out, DC 19.5V
Quick Start Guide
- Ensure the projector is connected to a power source.
- Turn on the projector using the power button.
- Adjust settings such as brightness, contrast, and aspect ratio as needed.
- Select the input source using the Source button.
- You can freeze the display using the Freeze button if required.
- To exit the menu, use the Menu Exit button.
- For HDMI input, connect your device to either HDMI 1 or HDMI 2 port.
Below table is the reference
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada ICES-003 Compliance: CAN ICES-003(B) / NMB-003(B)
CE Conformity for European Countries
The device complies with the EMC Directive 2014/30/EU, Low Voltage Directive
2014/35/EU, and Ecodesign Directive 2009/125/EC. The full Declaration of
Conformity can be found at the following website:
https://www.viewsonicglobal.com/public/products_download/safety_compliance/projector/VS19701_CE_DOC.pdf
Declaration of RoHS2 Compliance
This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC).
VS19701_QSG_1a_20230707
Copyright © 2023 ViewSonic Corporation. All rights reserved.