RUNSTAR BNA01 Nasal Aspirator User Manual

RUNSTAR BNA01 Nasal Aspirator

IMPORTANT INSTRUCTIONS BEFORE USE

This device is designed to remove nasal secretions and nasal mucus and is suitable for newborns to the elderly. Before using this device please read this user manual carefully.

1. This device must be operated by an adult, do not allow children to use this device alone.
2. When not in use, keep the product out of the reach of children
3. The device is only suitable for simple nose cleaning. If you or your baby’s nose feels uncomfortable, it is recommended to contact a medical professional for treatment.
4. During the use of this device to help baby/child/adult clear nasal secretions, please ensure that the baby/child/adult keeps breathing normally. Do not make them hold their breath, shut up or swallow. Avoid pressure imbalances in the tympanic membrane caused by the vacuum pressure generated by the device.
5. Always clean the device after each use.

CAUTIONS: Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

1. Do not expose the device to extreme temperatures, high humidity or direct sunlight.
2. Do not place or store this device where it can fall, or be pulled into a tub or sink.
3. Never drop or insert any object into any opening or hose.
4. Never block the air openings of the product or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and similar materials.
5. Never use while drowsy or sleeping.
6. Do not use the nasal aspirator when: Nasal bleeding, acute head, facial or neck injury, coagulopathy or bleeding disorder
7. Only insert the tip enough to create a gentle seal around the edge of the nostril.
8. If irritation occurs discontinue use immediately.
9. Do not use if it is overheating, operating irregularly, or is showing signs of damage to the housing.

PACKING LIST

Accessories include:

Product Overview

Product Specification

Operating Instructions

First Assembly After Arrival

1. Take out the snot container/tubing/appropriate tip from the host’s storage drawer;
2. Attach the silicone tip with the snot container;
3. Connect tubing to host and snot container, now you can power on and start suction.

How To Remove And Wash

• The sealing plate is not washable.

  1. Disconnect the tubing from the host and snot container;
  2. Remove the tip from the snot container;
  3. Upside down the snot container, pinch the bottommost sealing plate of the snot container with your index finger and thumb, turn it slightly to the left about 80° to unlock, and remove; * This part is not washable, please wipe it with a tissue.
  4. Use your thumb and index finger just pinch the elastic buttons on both sides of the base, gently pull out the base;
  5. Rinse the tubing, snot container and tip with water and scrub with a brush if necessary; air dry and place into the host’s storage drawer.

How To Assemble Snot Container After Cleaning

1. Angn the tute nate dealing plate with the bayonet on the base, pres it in
2. Dock the base with the snot container and push the base into the container until you hear a “click” to confirm it is installed.

How To Use

1. Assemble the device after choosing a suitable silicone suction tip;
   • A: for new born baby/shallow nostrils
   • B: for deeped nostrils
   • C: for deeped nostrils or when mucus is dry and lumps
2. keep the baby/child awake, gently insert the silicone tip into the nostril, be careful not to insert the silicone tip too deep into the nostril or press it against the inner wall of the nostril. When adults use it on their own, the head should be kept upright and then insert the silicone tip into the nostril;
3. press and hold the power button for 3 seconds to start, select the appropriate mode and suction level, press the on/off button to start suctioning out the nasal mucus;

Necessary Reminder

1. If necessary, block the other nostril to suck out mucus more effectively.
2. A small amount of saline may help to dilute the thicker mucus.
3. Opening the mouth helps relieve ear pressure discomfort.

Troubleshooting

Weak or no suction:

1. Check if the silicone suction tip is installed correctly;
2. Please charge before use;
3. Check if other components of the equipment are assembled correctly.
4. Check the white cotton gasket on the sealing plate for moisture/expansion, if so, replace the white cotton gasket (multiple replacements are included in the package)

Injury or pain:

1. It is forbidden to use when nosebleeds, head, face and neck are acutely injured;
2. Please do not over-insert the silicone suction tip into the nasal cavity or the nasal cavity wall;
3. Please do not use it continuously for a long time or use an excessively high suction level.
4. In case of severe nasal congestion or other uncertain conditions, please consult a doctor.

No sniffing or only a small amount of sniffling:

1. Please place the suction tip correctly in the nasal cavity and keep the head upright;
2. Use the appropriate suction head according to the viscosity of the nasal mucus;
3. Spray saline into the nasal cavity as needed to dilute the nasal mucus.

Kind Reminder:

1. Do not use any cleaning agents or solutions other than mild soap and water.
2. After cleaning, the snot container (remove the base and sealing plate) and the silicone tips can be sterilized with boiling water.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>