RUNSTAR BC026 Nasal Aspirator For Baby User Guide
- June 17, 2024
- RUNSTAR
Table of Contents
RUNSTAR BC026 Nasal Aspirator For Baby User Guide
How To Use Runstar Nasal Aspirator
Step 1 Select the appropriate silicone tip and fitting it to the snot collector
Step 2 Connect one end of the silicone tube to the snot collector
Step 3 Connect another end of the silicone tube to white host
Step 4 Turn on and choose the suitable suction level, then begin suction
How To Unpick The Runstar Nasal Aspirator
Step 1 Remove the silicone tip
Step 2 Remove the silicone tube
Step 3 Turn the snot collector upside down, pinch the sealing tab with your index finger and thumb and rotate it 80°, then remove the sealing tab.
Step 4 Use your index finger and thumb to squeeze the elastic buttons on both sides of the base and gently pull out the base
Tips: Except for the sealing tab and silicone tube, the rest of the accessories can be rinsed directly.
FAQ
Q: Why there is no suction?
A: 1) Please check if the silicone tip is installed in the correct
direction.
If installed incorrectly on the sealing sheet, normal use will result.
Do not squeeze the silicone tube during use.
2) Please check that both ends of the silicone tube are tightly connected and
there is no air leakage.
3) Please check whether the white filter cotton piece on the sealing tab is
soaked by mucus. If so, please replace the cotton piece.
Q: Why is the suction power low?
A: Please check whether the white filter cotton piece on the sealing tab
is soaked by mucus. If so, please replace the cotton piece.
Q: Why can’t the nasal aspirator be turned on?
A: Please make sure the device has power. If it is out of power, please
use a 5V adapter to charge the device. Do not use a fast charging adapter.
Q: How can I prevent damage to the nasal aspirator?
A: 1) The nasal aspirator is designed for adult operation. Please keep it out
of the reach of children to prevent them from accidentally damaging the main
body of the device, such as buttons, plastic housing, etc.
2) Please follow the user manual to assemble and use the product correctly,
wrong assembly and use methods will damage the device.
Q: How to maintain the device?
A: 1) Be sure to wash after use and sterilize with hot water, dry and store.
2) Check at any time whether there is liquid leakage into the silicone tube,
if so, use a longer tool to go deeper into the tube to dry it, or rinse it
with water directly and dry it. Liquid in the pipe will cause a decrease in
suction.
3) To keep the battery healthy, if not used for a long time, please charge the
battery to 100% every two months.