FLYCAM FLCM-FLN-MSTR-03 Flowline Master with Pro Vest Instruction Manual
- June 17, 2024
- FLYCAM
Table of Contents
FLYCAM FLCM-FLN-MSTR-03 Flowline Master with Pro Vest
Product Information
Specifications:
- Product Name: Flowline Master with Pro Vest
- Model Number: FLCM-FLN-MSTR-03
- Weight Capacity: Recommended minimum weight of 4kg / 8.81lb
Product Usage Instructions
Assembly:
- Inspect the contents of the package to ensure all components are present.
- Join section-1 of the support bar to section-2 using the push-fit technique.
- Attach section-2 to section-3 and tighten the side knobs securely.
- Wear the Support Jacket and adjust the buckles at the chest and waist for a comfortable fit.
- Attach the camera to the hook by loosening the knob, securing the camera, and tightening the knob.
- Attach one end of the Safety Belt to the Support Jacket and knot the rest of the belt as shown in the image.
- Secure the other end of the Safety Belt to your camera for additional safety.
Operation:
Use the Tension Adjustment Knob to adjust tension by rotating it anti-
clockwise based on your setup’s weight. Ensure not to release the Lever
without removing the setup to prevent damage to the camera.
FAQ
-
Q: What is the recommended weight for pulling down the balancing rope?
A: It is recommended to attach a minimum weight of 4kg / 8.81lb for proper operation of the Flycam Flowline system. -
Q: How do I ensure a secure connection between the camera and hook?
A: Loosen the knob of the hook, attach the camera securely, and then tighten the knob to ensure a slip-free connection. -
Q: How should I adjust the Support Jacket for comfort?
A: Tighten the buckles at the chest and waist of the Support Jacket and adjust until you find a comfortable fit.
What’s In The Box
Please inspect the contents of your shipped package to ensure you have
received everything that is listed below.
Flowline Master Setup
NOTE: It is recommended to attach the minimum required weight (4kg / 8.81lb)for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system.
- Join section-1 of support bar to section-2 with simple push-fit technique.
- Remove the side knobs and join section-2 with section-3 and again tighten the side knobs.
- Wear Support Jacket and tighten the buckles provided at chest and waist. Then adjust until you find it comfortable.
- Loosen the knob of hook and attach the camera with it. Tighten the knob to ensure slip free connection.
For Safety Belt
- Attach one end of Safety Belt with Support Jacket, Make a knot with rest of the belt as shown in the image. You can attach this belt at many areas according to your requirement.
- Attach other end with your camera, for more safety & protection.
- Through the Tension Adjustment Knob, you can adjust the tension by rotating the knob anti-clockwise according to the weight of your setup.
CAUTION: Do Not release the Lever without removing the setup. It may result in serious damage to the camera.
YOUR FLYCAM FLOWLINE MASTER WITH PRO VEST ALL DRESSED UP AND READY TO GO
Warranty
We offer one year warranty for our products from date of purchase. Within this period, we will repair it without charge for labour or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>