Lumary G1 Smart Recessed Lighting Pro 6 Inch with RGB Night Light Instruction Manual
- June 17, 2024
- Lumary
Table of Contents
HIKVISION DS-QAZ1325G1T Network Horn Speaker
Product Notes
What’s in the Box
- Lumary 4″or 6″ Ultra-thin Down light
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A/B | 4″or6″ Ultra-thin Downlight | 1 |
| C | J-Box Driver | 1 |
| D | Nuts | 3 |
| E | HOLE CUT-OUT | 1 |
Get Ready
- Know your Wi-Fi network and password.
- Make sure your mobile device is running iOS 13.3 or higher and Android 9.0 or higher.
- Make sure you’re connecting to a 2.4GHz Wi-Fi network (Lumary can’t connect to 5GHz networks).
INSTALLATION INSTRUCTIONS
IMPORTANT:
Read all instructions before installing fixtures. Retain for future reference.
SAFETY:
For your safety, this fixture must be wired in accordance to local electrical
codes and ordinances. All work should be done by a qualified electrician.
WARNING:
Make certain power is OFF from the electrical. Panel before starting
installation or attempting any maintenance. Indoor installation only.
PRE-INSTALLATION:
- Turn power OFF from the electrical panel before starting installation.
- Locate a suitable position to plate the fixture and open in accordance to the cut-hole dimensions (refer to Hole Cut Table for appropriate size).
- Run electrical wire from the switch (power supply) through the mounting hole-use NMD90 Romex.
DRIVER WIRING:
New construction applications: Hardwire box shall be firmly secured to studs,
joists, or similar fixed structural units.
Remodel applications: Do not require the hardwire box tobe formyl secured
after the mounting plates, studs, joists or structural units have been
concealed. Junction box suitable for maximum of 5 No 12 AWG or 8 No 14 AWG
Conductors.
INSTRUCTIONS
-
Turn off the power before installation. Remove the existing fixture if applicable. Determine the location and necessary hole cutout diameter using the supplied table and cut the ceiling hole with the listed approximate diameter(Fig1)
-
Open the J-Box cover and remove the appropriate knockout(s) on the side panel. Install the appropriate cable clamp(s)( not included) and insert the electrical supply cable through the cable clamp. Connect the supply wires to the fixture wires by using 3 connectors. Attach white to white, black to black,
-
Insert J-Box through the mounting hole and secure it, connect the fixture power cable to the J-Box. (Fig3)
-
Push the spring-loaded clips into the mounting hole upwards and insert the fixture into it. Release the clips and the fixture will be pulled flush to the ceiling.(Fig4)
-
Turn on the power after installation, check the fixture can work well.(Fig5)
Parameter information
| Name | Lumary 4″ or 6″ Ultra-thin Downlight G |
|---|---|
| Model | L-SD4G1/4/8/12, L-SD6G1/4/8/12 |
| Input Voltage | 100-130VAC,60Hz |
| Wattage | 9W/13W |
| Color Temperature | RGB +Tunable White(2700K-6500K) |
| CRI | 90+ |
| Lumens | 780Im/1100 Im |
| Beam Angle | 110° |
| Rated Life | 25000h |
FCC ID:2ANDL-CBU
Made in China
If you have any questions about use and operation, you can contact us!
Customer Service Email: support@lumary.tech
You can also search for our “account name” and “enter URL” on social media platforms or directly scan the following QR code to find us quickly.
- Facebook: US-Smart Home (https://www.facebook.com/Lumary-Smart-Lighting-102878658675054)
- You Tube: Lumary Official (https://www.youtube.com/channel/UCcEQnWxockzsPwyPOfSppug)
- lnstagram: lumary Smart Home (https://www.instagram.com/Iumarysmartlights/)
- Twitter: Lumary@ Lumarysmar thome (https://twitter.com/Lumarysmarthome)
- Pinterest: Lumary Smart Home (https://www.pinterest.com/LumarySmartHome/)
| | | |
---|---|---|---|---
Can’t connect? Need help?
WE CAN HElP
HAVING AN EASY TALK TO US BEFORE YOU RETURN
THE PRODUCT WILL FIX A PROBLEM MORE QUICKLY
CUSTOMERS SUPPORT
Lumary support:
support@lumary.tech
Visit us at:
www.lumary.tech
www.lumarysmart.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>