soundcore Life Q20 Hybrid Active Noise Headphones User Manual

June 17, 2024
Soundcore

soundcore Life Q20 Hybrid Active Noise Headphones

soundcore Life Q20 Hybrid Active Noise Headphones

Safety information

safety information
safety information
safety information
safety information
safety information

Powering On / Off

Power On| | Press and hold for more than 3 seconds| | Flashing blue (Status indicator)
---|---|---|---|---
Power Off| | Press and hold for 3 seconds| | Steady red for 1 second (Status indicator)
ANC On| | Press and hold for more than 1 second| | Steady green (NC LED indicator
ANC Off| | Press and hold for more than 1 second| | NC LED indicator off

Powering On / Off

Pairing

Enter Bluetooth pairing mode when Life Q20 is off| | Press and hold for 5 seconds
---|---|---
|  Rapidly flashing blue Rapidly flashing blue| ” Press and hold for 5 seconds
| Steady blue| Connected to a device(but is not playing music)
| OFF(Status indicator )| Connected to a device(playing music)
| Rapidly flashing blue| Connected to a device(Incoming call)

Pairing

Controls

Bluetooth mode


| Press| Play / pause Note: the status indicator will light up in blue for 2 seconds, then turn off.
| Press and hold for 1 second| Next track
| Press and hold for 1 second| Previous track
| Press| Volume up / down
Default mode| Normal Equalizer
| Press multi-function key twice Note: Press twice again to switch back to Normal Equalizer.| Bass UP™(Dual Equalizer)
Icon| Press and hold for 1 second| ANC mode (Active noise canceling mode) activation
ANC mode (Active noise canceling mode) deactivation

Active Noise Cancelling mode (ANC) blocks the noise from surrounding environment while wearing Sound core Life Q20.


| Press| Answer / End call
Put current call on hold and answer incoming call
| Press and hold for 1 second|
| Slow flashing blue (Status indicator)| On a call
| Slow flashing blue (Status indicator)| Incoming call

| Press and hold for 1 second| Activate Siri / other voice control software

 Aux-in

Plugging in an audio cable will automatically switch to AUX mode, and Bluetooth mode and ANC will turn off.

   Aux-in

Charging Your Headphones

| Notification sound (Tone) :There are only 2 hours of playtime left. You will hear a voice prompt every 30 minutes.| Low battery
---|---|---
| Flashing red once every 60 seconds (Bluetooth LED indicator)
| Steady red (Status indicator)| Charging Note: Do not switch on Life Q20 while charging.
| Off (Status indicator)| Fully charged

Charging Your Headphones

Specifications

Specifications are subject to change without notice.

Input 5 V 0.65 A Impedance 16
Charging time 3 hours Driver (full range) 40 mm x 2
Playtime (Bluetooth with ANC mode on) 40 hours Frequency response 16 Hz –

40 KHz
Playtime (Bluetooth with ANC mode off)| 60 hours| Bluetooth version| V 5.0
Weight| 268 g / 9.5 oz| Range| 15 m / 49.21 ft

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals