guzzanti GZ-06B1 Refrigerator Instruction Manual

June 17, 2024
guzzanti

guzzanti GZ-06B1 Refrigerator

guzzanti-GZ-06B1-Refrigerator-PRODUCT

Product Information

Specifications:

  • Model: GZ-06B1
  • Volume (L): 45
  • Frequency (Hz): 50
  • Current (A): 0.45
  • Noise Level (dB(A)): SN/N/ST I
  • Energy Consumption (kWh/24h): 220-240
  • Coolant: Not specified
  • Weight (kg): Not specified
  • Depth: Not specified

Product Usage Instructions

Installation:

  1. Place the refrigerator in a well-ventilated area with sufficient space around it.
  2. Ensure the refrigerator is on a stable and level surface to prevent vibration.
  3. Connect the refrigerator to a power source that matches the voltage and frequency requirements.
  4. Allow the refrigerator to sit upright for a few hours before plugging it in to allow the coolant to settle.

Operating the Refrigerator:

  1. Open the door carefully and avoid slamming it shut to prevent damage.
  2. Adjust the temperature settings according to your preferences using the control panel.
  3. Organize items inside the refrigerator efficiently to maximize storage space.
  4. Clean the interior and exterior of the refrigerator regularly to maintain hygiene.

Frequently Asked Questions (FAQ):

  • Q: What should I do if the refrigerator is making loud noises?
    A: Check if the refrigerator is properly levelled and adjust it if necessary. Also, ensure that items inside are not touching the walls of the refrigerator causing noise.

  • Q: How often should I defrost the refrigerator?
    A: The frequency of defrosting depends on usage, but typically it is recommended to defrost when ice buildup is more than 0.5 inches thick.

  • Q: Can I use the top of the refrigerator for storage?
    A: It is not recommended to use the top of the refrigerator for storage as it can obstruct proper ventilation and affect the cooling efficiency.

Thank you for purchasing our products and thank you for placing your confidence in us. Please read this manual carefully before using it. Follow instructions and keep it for future reference. Please follow the operating instructions and safety notices in the manual. If any trouble arises, do not fix it yourself or hand it to the after-sales service centre which has not been authorized. Please contact the local authorized service centre.

NAMES OF THE PARTS

guzzanti-GZ-06B1-Refrigerator-FIG \(1\)

  1. Ice-making compartment
  2. Collect water box
  3. Steel shelf
  4. Temperature control knob
  5. Steel tube
  • The refrigerator you purchased may be improved, which may not be completely consistent with the manual, However, the functions and operating methods will not change. Please feel free to use!
  • If you use the refrigerator for the first time, remove the adhesive tapes from the drawers, balconies, egg tray, and the drain tube plug.
  • Do not pull or push the drawers and balconies fiercely during use in case of damage.
  • Adjusted the temperature control as higher as you could accept, which w energy consumption of the refrigerator and your money; ill save the
  • Don’t open the refrigerator door continually if it is in a normal working situation.
  • Keep the combination of drawers, baskets and shelves of the refrigerator consistent with its original standard.

SAFETY WARNINGS

To ensure your safety, please follow the points below:

  1. The circuitry for the refrigerator must be isolated. The area of the cross-section of wire must be larger than 0.75 mm2. The power plug should have its own socket, the socket must be ground as the adapter may cause the socket to overheat.
  2. The voltage and frequency of this product should be 220-240V;50Hz. Contact the local maintenance station or retailer if the wire is damaged.
  3. Do stop the power only by pulling the power plug out of the socket directly but not by the wire.
  4. Do not damage the refrigerant circuit.
  5. This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  6. Children should be supervised to ensure that they do not play with the appliance.
  7. Keep ventilation opening, in the appliance enclosure or the built-in structure, clear of obstruction.
  8. Before you throw away your old refrigerator or freezer.
  9. Take off the doors;
  10. Leave the shelves in place so that children may not easily climb inside.
  11. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. This appliance is intended to be used in households and similar applications such as
    • staff kitchen areas in shops, offices and other working environments;
    • farmhouses and by clients in hotels, motels and other residential-type environments;
    • bed and breakfast type environments;
    • catering and similar non-retail applications.
  12. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
  13. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

NOTICE:

  1. When gas leaks from its container, don‘t pull the plug, out or in, for it may arouse sparks and fire calamities.
  2. Don‘t splash water on the rear of the appliance, for it may cause malfunction or electric shock.
  3. Don‘t store inflammable materials such as ether, benzene, LP gas glue etc in the refrigerator.
  4. It is better not to place objects on the top of the appliance which is magnetic, heavy, or filled with water. Electronic components may not work steadily if water gets inside. Do not store objects which is costly or impressible to temperature and, e.g. serum, bacteria and so on.
  5. The refrigerant of this product is R600a, which is inflammable. So, make sure not to damage the cooling system during the transportation and installation.
  6. DISPOSAL: Do not dispose of this product as unsorted municipal waste. Collection of such wastes separately for special treatment is necessary.

INSTALLATION INSTRUCTIONS

  1. The refrigerator should be located on a completely flat surface, Leave 5~10 cm between each side of the appliance and the wall, and leave 30 cm between the top of the appliance and the ceiling.
  2. Choose a location that is not exposed to sunlight, high temperature or humid, as the humidity may cause stains.
  3. Pulled out the bottom panel before installation.
  4. The appliance can be adjusted by rolling its two legs in front of the bottom when it is unstable. Rolling in clockwise can rise the machine.
  5. The location should be firm and flat. An un-securely position may cause noise and libration:
    • The noise may be increased if the floor is not firm.
    • Put a sheet under the appliance for solving the heat emission if you need to locate it on a carpet.
  6. Make sure the adjustable legs are clung to the floor, and set the appliance slope backward slightly to keep the doors closed tightly.

OPERATION INSTRUCTIONS

PLACEMENT OF FOOD

  1. There should always be some space between items inside for air circulation.
  2. Food should be kept in a sealed package to avoid becoming dry or with odour.
  3. Hot food should be cooled down before placing into the appliance. Otherwise, interior temperature and electronic consumption will increase.
  4. Reducing the frequency of door opening can efficiently lower electronic consumption.

Warning:
Do not use any electronic equipment inside the appliance.

The temperature of the refrigerator can be controlled manually by the knob. Turn the knob to state COLD when it is normally used, turn it to the state during COLD-COLDEST if a lower interior temperature is required; contrarily, to the state during COLD-COOL, when a higher one is needed.

PACKING AND MOVING

  1. Unpack, repack and carry Please memorize the position of each accessory of the appliance when unpack it, repack the product and check it carefully before transportation.
  2. Do not lift or pull the door or the door handle during transportation.
  3. When moving, the appliance can not be sloped over 45 degrees (the angle to the vertical direction). Please avoid strong vibration and hit.

MAINTENANCE

The appliance should be maintained and cleaned frequently. For your safety, please pull the plug out of the socket before the cleaning.

  1. Interior maintenance
    Clean the interior of the appliance with clean water or neutral abluent. Scour it with clean water and wipe it with a piece of dry cloth.

  2. Maintenance of door gasket
    It is easy to damage if the door gaskets are polluted by stains like oil, sauce, etc., so it is better to clean them carefully.

  3. Outer maintenance
    Wipe the dust with a piece of dry cloth, and clean it with neutral abluent if necessary.

DEFROST

The heavy frost will influence the refrigerating of the appliance and increase energy consumption. Thus, defrosting is needed as the frost is as thick as 5 mm. Processes of the manual defrost are listed as follows: take all the food out of the compartment; uninstall the drawers and shelves; unplug the electronic power cord; open the doors and wait for the thaw; wipe up the water with a dry cloth.

  • Do not use any other equipment or method to push the defrost process. It may destroy the cooling system.

DISCONNECTING THE APPLIANCE

After power failure, even in summer, the refrigerator can store food normally for several hours.

  1. Discontinuation during power failure
    After power failure, do not put additional food in the appliance and reduce the frequency of door opening. Make several pieces of ice in a container if know the power failure beforehand, and put it in the top of the fridge.

  2. Discontinuation during vacation
    Please fetch out the easy-rot food and the food in the fridge before shot vacation. After confirmation, close the door firmly. If have a long vacation, please fetch out all the food and cut off the power. After defrosting, clean up the liner of the appliance wipe it dry, and leave the door open.

  3. Stop using
    If the refrigerator may be stopped for a long time, please unplug the outlet and clean up the appliance. The door should be kept open to prevent unpleasant smell caused by food leavings.

Attention
In a general condition, do not stop the appliance in case of affects its life. After unplugging the power, please leave at least 5 minutes before resumption.

USER NOTIFICATIONS

  1. Do not splash water on the refrigerator, as it will cause oxidation and malfunction.
    Electronic components such as the on/off button should be wiped dryly.

  2. Cleansers such as soap powder, abrasive cleaning powder, alkali cleansers, chemical cloth, thinner, alcohol, acid petroleum products and hot water should not be used to clean the refrigerator as they may damage the painted cover and plastics.

  3. Smear can damage the interior plastic component, so wipe it as soon as possible.

  4. Please check the points below after maintenance:

  5. Is there any damage or loss of the electronic wire?

  6. Can the plug be put in the socket reliably and smoothly?

  7. Is the plug heating unconventionally?

Warning

  • Please get rid of the gasket of the door before the disposal.
  • The disposed apparatus should be handled by professional staff, as it may be harmful to the environment.

TROUBLESHOOTING TIPS

  1. 1. The refrigerator does not work
    It may not be connected to the power supply(plug, power cut or fuse); Voltage is too low.
    2. The refrigerator does not work efficiently as expected
    It may be caused by heavy frost, or warm temperature settings, or by frequent door operating.
    3. It makes unusual noise
    It may be caused by an imbalance or loose ground locating the appliance, or by resonation between the appliance and other ambient objects.

  2. The compressor keeps working for a long period
    The environmental temperature may be too high. The doors may be opened frequently or even they are left open. The temperature control knob setting in the (4-7) state may increase the working time of the compressor.

  3. Disgusting odour happens
    Food with strong odour should be packed tightly before being put inside the appliance.
    Please check whether there is any deteriorated item or whether the liners are left dirty for a long time.

  4. Water leaks from the bottom of the refrigerator
    The drain tube is jammed. Please use a proper tool to solve it.

  5. Heavy frost occurs on the rear of the appliance
    Putting humid or hot food into the appliance may cause this problem. Or it may be caused by the heavy environment moisture.

The following cases do not malfunction

  1. Moisture may form dew on the outside of the product during the humid season, just get it wiped.
  2. The flow of refrigerant through the pipeline coil can cause a bicker.
  3. Normally, the sides of the product get warm as a result of the cooling pipeline working.
  4. The frame of the appliance will be warm during working by the defrost pipeline inside it.

Please check the points above first. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.

SPECIFICATIONS AND PARAMETERS

Climate class

|

SN/N/ST

---|---
Electric shock protection type| I
Capacity (L)| Freezer| /
Refrigerator| 45
Voltage (V)| 220-240
Frequency (Hz)| 50
Current (A)| 0.45
Voice [dB(A)]| <42
Energy consumption (kW.h/24h)| 0.22
Refrigerant| R600a/18g
Weight (Kg)| 15.2
Interior temperature ( C)| Freezer| \
Refrigerator| 0~8
Dimension (mm)| Width| 444
Depth| 485
Height| 495

PACKING LIST

Parts

|

Number

---|---
Collect water box| 1pcs
Stell shelf| 1pcs
Owner‘s manual| 1copy

Note:
Products are subject to improvement from time to time, and any changes in parts without further notice.

DISPOSAL

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste. For proper disposal, renewal and recycling hand over these appliances to determined collection points. Alternatively, in some European Union states or other European countries, you may return your appliances to the local retailer when buying an equivalent new appliance. Correct disposal of this product helps save valuable natural resources and prevents potential negative effects on the environment and human health, which could result from improper waste disposal. Ask your local authorities or collection facility for more details. Per national regulations, penalties may be imposed for the incorrect disposal of this type of waste.

For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the necessary information.

Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from the local council or your retailer.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals