COMPASS 07193 ARMOR Air Compressor User Manual

June 9, 2024
COMPASS

07193 ARMOR Air Compressor
User ManualCOMPASS 07193 ARMOR Air Compressor -
FigCOMPASS 07193 ARMOR Air Compressor -
iconCOMPASS 07193 ARMOR Air Compressor -
icon1

07193 ARMOR Air Compressor

Air compressor DRAME
Air compressor in a compact design, 12V power supply. Long power cable with a plug into the 12V car cigarette lighter socket. The compressor is suitable for inflating car, motorcycle or bicycle tires to a pre-set pressure. The package includes additional adapters for various uses (inflating balls, mattresses, pools, etc.) and a spare fuse for the 12V plug. The compressor is equipped with a digital tire gauge that displays the measured pressure in several different units. Another feature is a built-in LED flashlight. For the sake of safe and correct use of the device, it is necessary to study this manual thoroughly before use.

INSTRUCTIONS FOR USE

Compressor

  • Plug the compressor socket into a 12V car cigarette lighter.
  • Screw the compressor hose onto the valve. The pressure gauge will show the tire pressure.
  • Units can be changed using a button on the control panel.
  • Set required pressure using buttons on the control panel . Non-flashing display confirms selection.
  • Turn on the compressor with the button to start inflation. When the required pressure is reached, the compressor stops by itself.
  • Switch off the compressor with the switch. Lamp
  • The LED flashlight on the compressor is used to illuminate the work area or as an SOS lamp.
  • The flashlight is turned on by a button on the top of the device.

MAINTENANCE, CLEANING AND STORAGE

  • This electrical device does not require any special maintenance.
  • Use only a slightly damp cloth for cleaning. Do not use aggressive cleaning agents.
  • Store the compressor in a dry place in a dust-free environment.

CAUTION

Never leave the compressor on for more than 10 minutes- there is a risk of overheating.
When inflating to higher pressures, inflating may take longer (more air pressure must be achieved).
The compressor is equipped with a fuse that is built into the cigarette lighter plug. You can replace it by unscrewing the front part of the plug.

TECHNICAL DATA

Input 12V =
Power 120 watt (max. 10 Amp)
Air flow 35 I / min
Max. pressure 10,3 BAR : 150 PSI
Max. running time 10 min.
Light LED
Model 07 193

WARNING

  • During, or after work, the compressor (especially its inflating hose) can be hot. Do not touch it by bare hands, use gloves to protect your hands from burns.
  • The compressor is not intended for inflating the tires of construction machines and tractors.
  • Never leave the device unattended when it is switched on. The compressor is not intended for long-term operation – there is a risk of damage from overheating. The maximum time of use is 10 minutes.
  • In case of overheating, switch off the compressor immediately and let it cool down for approx. 30 minutes.
  • Before connecting to the 12V cigarette lighter socket, make sure (in the car documentation) that it is possible to plug in a 10Aappliance!
  • Do not expose to rain or water, protect the device from rain or moisture and from flammable liquids or gases.
  • Do not use the compressor for purposes other than those intended, do not exceed the permissible load of the device.
  • Never pull the cable when disconnecting the connector from the cigarette lighter.
  • Before each use, check the connection cable and air hose and, if damaged, have them repaired by an authorized repair shop or replaced.
  • When inflating objects, constantly check the pressure and turn off the compressor immediately after the inflated object reaches the desired pressure.COMPASS 07193 ARMOR Air Compressor - Fig2

Electrical appliances should not be disposed of together with municipal waste. According to Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE / WEEE) and related national legislation, electrical waste must be separated and recycled. Recycling as an alternative to disposal: the owner of electrical equipment is obliged to hand over the equipment to a collection point or ensure its proper recycling. Electrical waste can be disposed of at a waste collection point operated in accordance with applicable national waste guidelines. This does not apply to accessories without electrical components.

www.compass.cz
Compass CZ servo., Pra2ska 17 – 250 81 – Nehvizdy, CZ
e-mail: info@compass.cz
last revision 08/2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals