poppy PY-LDBS-SLV Disco Ball Wireless LED Speaker User Manual
- June 17, 2024
- poppy
Table of Contents
poppy PY-LDBS-SLV Disco Ball Wireless LED Speaker
INSTRUCTION
- Press the power switch down to turn the speaker on. The light will keep blinking at a constant rate and the mirror ball will rotate.
- Press the power switch up to turn the speaker on. The light will stay on as normal and the mirror ball will rotate.
- To turn off the light and speaker, flip the power switch to the middle (off) setting.
SPECIFICATIONS
- Product Size: 5.9″ x 5.9″ x 1 O”
- Product Weight: 1.21 lbs
- Loudspeaker.45mm
- Rated Power. 3W
- Interface: DC5V
Bluetooth Specifications
- Operation Frequency:2.400GHz-2.480GHz Receiving Sensitivity: -88db
- Operating Range: Up to 32.8ft
Battery Specifications:
- Capacity 1200mAh 3.7V, Li-ion Battery
- Music Playback Time: 3 – 4 hours at 50% volume Charging Standard: DC 5V, 500mA
- Charging Time: 2 – 3 hours
Accessories
- USB Cable: 1 pc
- User Guide: 1 pc
- Speaker: 1 pc
OPERATION
- Power switch: Switches the unit On/Off
- Charging port: DC 5.5mm port
- LED indicator:
- Red light on: in charging mode
- Red light off: fully charged
- Blue light flashing quickly: in Bluetooth pairing mode Blue light keeps bright: Bluetooth pairing successfully Blue light flashing slowly: Music playing process
Bluetooth Paring
Turn the speaker on, if the speaker has not been connected to any smart device, it will be in bluetooth pairing mode automatically (blue light flashes quickly). Turn on the bluetooth function on your smart device, search for the bluetooth pairing name ” PY-LOBS” and connect to it. If the speaker has already been connected a smart device, to enter bluetooth pairing mode, please go to the connected device and remove/disconnect the speaker from the bluetooth device list. Once the speaker is not connected to any smart device, it will be in pairing mode automatically again.
FCC
FCC Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device. under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiofTV technician for help.RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
XOPOPPY © COPYRIGHT ALL RIGHTS RESERVED. XOPOPPY is an innovative company of Truststone Group LLC. No portion of this design may be reproduced without express written permission. Other trademarks and trade names are those of their respective owners. All right is reserved. Distributed by Truslslone Group LLC. New York Ny 10018.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>