HUALEDI Propane Heaters Heating Deflector Installation Guide
- June 17, 2024
- HUALEDI
Table of Contents
HUALEDI Propane Heaters Heating Deflector
Quantities of each part
Assembly steps
- Step 1
- Line up the three panels.
- Align the holes alongside.
- Step 2
- Use the straight serews and nuts to fasten the panels.
- Only screw the bottom six holes.
- Step 3
- Put the fittings (Screw Nut and U/Shaped
- Bracket ) towards the hole as the pic.
- Need Slotted/Phillps Screwdriver to fasten
-
Step 4
- Assemble the fittings (Screw Nut and U/Shaped Bracket) on the refector hole as the pic.
- Need Slotted/Phillps Screwdriverto fasten.
-
Step 5
Completed reflector as above pic. -
Step 6
Clip the U-shaped bracket to the top shield. fasten the butterfly screw to the reflector as the pic. -
Step 7
Assembly done.
Note: Please be careful with the edge during installation to avoid
scratches. Not included Slotted/Philips Screwdriver.
Read User Manual Online (PDF format)
Loading......