afifurnishings R-28683X Madison Full Traditional Bed Headboard Instruction Manual
- June 17, 2024
- afifurnishings
Table of Contents
afifurnishings R-28683X Madison Full Traditional Bed Headboard
Specifications
- Product: Headboard
- Materials: Metal
- Available Sizes: Twin, Full
- Hardware Included: JCB screws, barrel nuts, flat washers, split washers, Allen wrench
Headboard Assembly Instructions
Parts List
- 1 Headboard Panel
- 2 Left Leg
- 3 Right Leg
Step 1: Attaching Legs to Headboard Panel
Attach the legs (2) and (3) to the headboard panel (1) using the provided
JCB screws and barrel nuts. Tighten with the Allen wrench.
Note : Spare hardware is included in case of damage during assembly.
Bed Frame Assembly Instructions
Parts List
- 1 End Rail
- 2 Tall Leg
- 2 Short Leg
- 4 Side Rail
Step 1: Inserting Wooden Dowels
Insert wooden dowels into the locator holes on both ends of the end rail.
Step 2: Attaching Legs to End Rail
Attach the legs (2) or (3) to the end rail (1) using the provided JCB
screws and barrel nuts. Tighten with the Allen wrench and cover holes with
wood buttons.
Choose tall legs for storage drawers, Trundle bed, or mattress only. Choose
short legs if using both foundation and mattress.
Step 3: Attaching Side Rails
Attach side rails (4) to the end rail using bed hooks as shown. For
headboard assembly, follow the instructions included with the headboard.
Slat Kit Assembly Instructions (Twin)
Parts List
- 1 Slat Kit Set
Note : Spare hardware is included in case of damage during assembly.
Please note: You will require a Phillips screwdriver for assembly.
FAQ
Q: What should I do if I receive a damaged or defective item?
A: Please contact afifurnishings at
customerservice@afifurnishings.com
or call 1-800-955-3726 for assistance.
ASSEMBLY INSTRUCTIONS
Before assembling your headboard, please read through these
instructions carefully and familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Step 1
Attach the legs (2) and (3) to headboard panel (1), using JCB (A) and barrel
nut (B). Tighten with the Allen wrench (F).If you purchased a wood headboard to attach to metal bed
frame, please refer to page 2.
ASSEMBLY INSTRUCTIONS
Before assembling your bed frame, please read through these
instructions carefully and familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item, please contact afifurnishigs at customerservice@afifurnishings.com or 1-800-955-3726
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
-
Step 1
Insert wooden dowels (a) into the locator holes on (1) both ends of end rail. -
Step 2
Attach the legs (2) or (3) to end rail (1), using JCB M6 X 100mm (b) and barrel nut (c). Tighten with the Allen wrench (e).
Cover holes with wood button (d). -
Step 3
Attach side rails (4) to the end rail using bed hook as shown. For headboard assembly, follow assembly instructions included with headboard.
SLAT KIT
ASSEMBLY INSTRUCTION ( TWIN )
Before assembling your bed slat kit, please read through these instructions
carefully and familiarize yourself with the different parts.
Please note that you will require a Phillips screwdriver.
ATTENTION! If you receive a damaged or defective item, please contact afifurnishings at customerservice@afifurnishings.com or 1-800-955-3726
HARDWARE
1 1/4” Wood screw – 28 pcs Spare – 2 pcs
-
Step 1
Assemble bed frame or bunk bed according to assembly instructions. -
Step 2
Lay the slat kit onto the bed.