Scudo Bathrooms BATH-003 Labyrinth Fluted Back to Wall Bath Installation Guide
- June 17, 2024
- Scudo Bathrooms
Table of Contents
Scudo Bathrooms BATH-003 Labyrinth Fluted Back to Wall Bath
Specifications
- Product: Modern Freestanding Bathtub
- Page: 1
- Universal instructions for all modern free-standing bathtubs
Product Usage Instructions
Pre-Installation Check
Before installing the bathtub, carefully inspect it for any transport
damage and ensure all components are complete. Complaints regarding damage
after installation will not be accepted.
Installation Guidelines
Read the following instructions thoroughly before installing the bathtub to
ensure safe and proper usage. Failure to comply may void your guarantee.
Adjusting Feet
Follow the instructions provided to adjust the feet of the bathtub
properly. Note that some products may vary in their adjustment mechanisms.
Weight Distribution
It is crucial to ensure that the legs of the bathtub are supporting its
weight and not the molded bath panel. Improper weight distribution can lead to
damage.
Notice and Maintenance Instructions Warning: Always verify that the
legs are correctly supporting the bathtub’s weight to prevent any damage to
the molded bath panel.
FAQs
Q: What should I do if I notice transport damage after installation?
A: Any complaints regarding transport damage should be reported before
installation as complaints post-installation cannot be accepted.
Q: Can I use this bathtub without adjusting the feet?
A: It is recommended to adjust the feet of the bathtub as per the
instructions provided to ensure stability and proper usage.
Please read the Instructions carefully before installation.
IMPORTANT
-
This instruction is universal for all modern free-standing bathtubs, aiming to show how to adjust the feet properly,
some products may vary to this example. -
Please check the bathtub for transport damage and completeness before installation. Complaints made following installation cannot be accepted.
-
Please read carefully the following instructions before installing your bathtub to ensure safe and proper use and avoid any injury to either the installer or the user . Failure to comply may invalidate your guarantee.
SAFETY INSTRUCTIONS
NOTICE AND MAINTENANCE INSTRUCTION
- Clean the bathtub periodically and dry after use
- Use warm soapy water and a soft cloth to clean the bathtub
- Never use an alkaline cleaner
- Avoid harsh abrasives or dyes that will scratch or stain the surface of the bathtub
- Never leave metal in the bathtub, or else the bathtub will get rusty or dirty
Warning : Ensure that the legs support the weight of the bath and not the moulded bath panel.
INSTALLATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>