BGates GT 12-24V Gate Opener User Guide

: June 17, 2024
: BGates

Table of Contents

INSTALATION INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BGates GT 12-24V Gate Opener User Guide

INSTALATION INSTRUCTION

Open your gate, turn on boiler or other devices with your phone!

NOTE: DEFAULT PASSWORD: 0000

IMPORTANT: please deactivate all services on SIM card used inside BGates, like Voice mail, etc

SMART MODE

BGates comes with the Smart Start feature active.
This means that the device does not need any programming for use. Simply ring the number of the inserted SIM card and BGates GT will activate the relay. Deactivate this feature if you prefer to have BGates GT open only for memorized numbers

Function

Smart Start ON
Smart Start OFF
Check BGates GT status
Password change (default password 0000)
To enable a new mobile phone to open a gate
To delete a mobile phone enabled to open a gate
Pulse operating mode settings (default)
Bistable operating mode settings
SMS text password ,E,SMART=ON (ex. 0000,E,SMART=ON)| Notes|
---|---|---
Open to all calls(factory default)|
password ,E,SMART=OFF (ex. 0000,E,SMART=OFF)| Open only to memorized numbers|
| |
password ,E,PING (ex. 0000,E,PING)| You will receive a response SMS withthe level of antenna signal strength|
old password ,P new password(ex. 0000,P,1234)| You will receive an SMS with text: “Your password has been changed”|
password ,I, phone number (ex. 0000,I,phonenumber)| You will receive an SMS with text: “phone number successfully inserted”|
password ,D, phone number(ex. 0000,D,phonenumber)| You will receive an SMS with text: “phone number successfully removed”|
password,E,M,1 (ex. 0000,E,M,1)| Pulse mode|
password,E,M,2 (ex. 0000,E,M,2)|
Bistable mode|

Power supply 12 ~ 24VDC
Power consumption: 200mA~100mA.
Relay: maximum voltage 250V AC, 110V DC
Relay: maximum current Capacity Load 10A@28VDC, 10A@240VAC,
Inductive load 5A@120VAC, 5A@28VDC
Action Type: 1 B-U, potential-free contact
Sizes: 66x85x40 mmFor the complete list of the over 50 commands please refer to our website www.bgates.it or scan the QR code.

To open the SIM-holder, push gently the upper door towards the inside of the BgatesSIM insertion.

SIM insertion
Lift the SIM door to be able to insert the SIM inside
Insert the SIM in the upper door.
Get down the door with the SIM and close the SIM-holder by sliding the door outside the BGates to lock it