NEC RD-480 Projector Remote Control Instruction Manual

: June 17, 2024
: NEC

Table of Contents

Important Information
Limitations
How to insert batteries
Appendix
- Remote control button layout
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEC RD-480 Projector Remote Control

NEC RD-480 Projector Remote Control

Important Information

Operating the included remote (RD-480E) English

The remote control (RD-480E) included with this projector is different than the one described in the User’s Manual.
Please read this manual for how to use this remote control (RD-480E).

NOTE

The RD-480E can only operate the projector it comes with. Even if the model numbers are the same, the RD-480E cannot be used with any projectors that do not come with an RD-480-E.

Step 1: Check the model number of the projector you are using.

Model category| Model number of the target projector for the remote (RD-480E)
---|---
Model A| NP-PA903X / NP-PA853W / NP-PA803U / NP-PA723U / NP-PA703W / NP-PA653U
Model B| NP-PA803UL / NP-PA703UL / NP-PA653UL
Model C| NP-PX1004UL-WH / NP-PX1004UL-BK / NP-PX803UL-WH / NP-PX803UL-BK
Model D| NP-PX1005QL-W / NP-PX1005QL-B
Model E| NP-PX2000UL
Model F| NP-PH3501QL / NP-PH2601QL (NP-LV01BD)

Step 2: Use the table at the end of the “Appendix” to check the corresponding remote control button for the type of projector (model category) you are using.

Meaning of the symbols in the table of the “Appendix”

Available	It can be used.
N/A	It cannot be used.
Limited	Some limitations exist. See below.

Limitations

Press the 10 FOCUS and 12 ZOOM buttons to bring up the adjustment screen, and use the buttons to make adjustments.
For Model A and Model B, the 10 FOCUS and 12 ZOOM buttons will only work when one of the option lenses NP40ZL/NP41ZL/NP43ZL/NP44ML is attached.
For Models C through F, pressing the 13 VOL./D-ZOOM +/− button does not adjust the volume.
For Model A, 15 SHUTTER/OSD OPEN/CLOSE buttons (SHUTTER OPEN/CLOSE) are not available. However, hold down the CTL button and press the SHUTTER/OSD OPEN/CLOSE buttons (OSD OPEN/ CLOSE) are available.
The 16 LIGHT button corresponds to ECO mode or the ECO button in the User’s Manual.
The 17 Geometric. button corresponds to the 3D REFORM button in the User’s Manual.
The 18 STATUS button corresponds to the HELP button in the User’s Manual.
The 22 HDBaseT button corresponds to the NETWORK button in the User’s Manual.
For model C, pressing the 29 AUX button cycles through BNC(R/G/B/H/V) Input → BNC(CV) Input → BNC(Y/C) Input.
The remote (RD-480E) for Model A and Model B does not have the following buttons. FREEZE, BLANK, MUTE, AV-MUTE, Edge Blend., Multi., INPUT, PIP, PBP/POP, AUTO ADJ., L-CLICK, RCLICK, PICTURE, DISPLAY, ASPECT, COLOR, 3D Set., SETUP, ECO, INFO
The remote (RD-480E) for Models C through F does not have the following buttons. INFO/L-CALIB., AV-MUTE, PICTURE, SOURCE, 3D REFORM, PIP/FREEZE, AUTO ADJ., VIDEO, S-VIDEO, VIEWER, NETWORK, ECO/L-SHIFT, LIGHT(button backlight)

How to insert batteries

Open the cover to the battery case on the back of the remote.
Insert AAA alkaline batteries with the + and − ends aligned like in the image.
Return the cover to its original position.
Insert the cover’s grooves into the catches on the case and then close it.

NOTE:

When replacing the batteries, purchase 2 of the same type of AAA alkaline batteries.

Appendix

Remote control button layout

No.| Buttons on Remote Control (RD-480E)| Model A| Model B| Model C| Model D| Model E| Model F
---|---|---|---|---|---|---|---

*(10)**

|

*(11)**