Bme Georgina Sideboard Solid Wood 2 Doors & 3 Drawers Instruction Manual

June 17, 2024
BME

Bme Georgina Sideboard Solid Wood 2 Doors & 3 Drawers Instruction Manual
Bme Georgina Sideboard Solid Wood 2 Doors & 3
Drawers

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Identify and count all parts and compare with the parts list below.

1| SIDEBOARD Package Content| 1 PC
---|---|---
2| LEG
Package Content| 4 PCS
3| CENTER LEG
| 1 PC
A| M6 x 15 | 18 PCS
---|---|---
B| 2 x Ø6.5 x Ø19  | 18 PCS
C| ALLEN KEY | 1 PC
D| PLASTIC ANCHOR | 4 PCS
E| M5 x 50 | 4 PCS
F| M4 x 15 | 4 PCS
G| ANTI-TIP KIT | 4 PCS
H| PLASTIC STRAP | 2 PCS

WARNING: Prior to assemble, please carefully check from part D to part H, if anything is missing, please contact Bme.
Product Overview

Symbols
NOTICE: DO NOT
use the power tools for assembly.
This can cause the bolts to be over tightened.
DO NOT over tighten hardware, damage may occur.

STEP 1
LAY THE TOP CABINET FACE DOWN ON THE GROUND BEFORE ASSEMBLING.
Instruction

A M6 x 15 18 PCS
B 2 x Ø6.5 x Ø19 18 PCS
C ALLEN KEY 1 PC

STEP 2: ANTI-TIP ATTACHMENT
Instruction

ANTI TIP KIT PATTERN
Anti tip Kit Pattern

PUT THE PENCIL THROUGH HOLES OF THE ANTI-TIP KIT TO MARK ON WALL.
Anti tip Kit Pattern

DRILL ALL HOLES IN WALL USING 8MM5/16” DRILL BIT
Anti tip Kit Pattern

PUT THE BACK OF THE SIDEBOARD AGAINST THE WALL.
Anti tip Kit Pattern

PUT ALL ANCHORS ONTO THE WALL.

D PLASTIC ANCHOR 4 PCS
E M5 x 50 4 PCS
G ANTI-TIP KIT 2 PCS

Anti tip Kit Pattern
Anti tip Kit Pattern
Anti tip Kit Pattern

DOOR ADJUSTMENT

  1. Side adjustment if the doors are not straight.
    Door Adjustment
    To move the door towards or away from the centre of the unit, loosen the screw shown.
    Adjust the position of the door then retighten the srew.

  2. Depth adjustment.
    Door Adjustment
    To move the door towards or away from the unit, adjust the screw indicated clockwise or anti clockwise to get the position required.

  3. Height adjustment.
    To adjust the height position of the door loosen the screws indicated on the side panel bracket, you will need to do this on all the brackets, adjust the door position and retighten the screws to secure the door.
    Door Adjustment

RETURN & TECHNICAL SUPPORT

  • Customers have the right to apply for a return within 30 days after the receipt of the product, please email to contact@yes4all.com.
  • For any inquiries on technical supports, please email us at techhelp@yes4all.com.

WARNING Risk of suffocation! Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g suffocation.

  • Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instruction must be included.
  • Use the product on a stable, level surface with protective covering.
  • Inspect the product prior to each use. Do not use the product with worn or damaged parts

LIMITED WARRANTY

Yes4All believes to bring customers the best experience with our high standard products that have been rigorously manufactured and tested. However, our products carry a limited warranty with the following terms and conditions:

  • Yes4All, or its affiliates, owners, officers, directors, employees, agents, suppliers (hereinafter abbreviated as “Yes4All”) offers a 1-year warranty period from the date of delivery to the original purchaser.
  • The warranty applies to manufacturing defects and domestic use only. Please be noted that we shall NOT be responsible for:
    1. Defects or damages resulting from incident, consequence, acts of nature, misuse, abusive use, negligence, improper care, unusual physical phenomena, modification of any part of the product, wear and tear, improper shipping handlings, natural deterioration of the product; or any other causes irrelevant to defective materials or fabrication;
    2. Defects or damages resulting from improper testing, operation, maintenance, installation or adjustment;
    3. Defects resulting from the operation with components or accessories that do not come with the original package;
    4. Any plastic surfaces or other externally exposed parts that are scratched or damaged by normal use;
    5. The products used for commercial purpose;
    6. Products that have been altered and no more remain its original states when being claimed;
    7. Injuries or any other damages of any nature of the buyers or its third party arising out of or in connection with the use or improper use or inability to use this product or any other legal theory and whether or not advised of the possibility of such damages.
  • When you have any warranty claim, please contact us via email contact@yes4all.com demonstrating your problem relating the defective product and do not forget to attach your proof of purchase which is the original sale invoice, or any other documents that can prove your original purchase, along with the pictures of the damaged item. If your letter is valid, we will then contact you to make an arrangement to review the claimed item and decide whether to repair it or exchange it with the good working same unit. The repairing term can take up to 30 days and you shall not receive any replaced faulty products or components.
  • The limited warranty covers the expenses for repairing the damaged product. All costs related to transportation, removal, inspection to check the possibility of warranty are borne by the customer.
  • Yes4All reserves the right to amend or supplement the terms and conditions of this Warranty Policy at any time without prior notice.

In case of defect or concern, within 30 days contact us for free replacement and support solution by Yes4ALL.LLC Care Team:
Yes4All.com contact@yes4all.com Yes4All.LLC
Bme Signature Design Bme Signature Design

Bme Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals