ENGO Controls E20WBATZB Zigbee Temperature Controller User Guide
- June 17, 2024
- ENGO CONTROLS
Table of Contents
ENGO Controls E20WBATZB Zigbee Temperature Controller
Product Information
Product Features
- Battery-powered
- ZigBee 3.0 communication standard
- Multiple functions accessible via ENGO Smart / Tuya Smart applications
- ENGO binding function (linking devices in Online and Offline mode)
Specifications:
- Power Source: Battery
- Communication Standard: ZigBee 3.0
- Control Functions: Available via ENGO Smart / Tuya Smart app
- ENGO Binding Function: Online and Offline device binding
- Dimensions: 80 x 80 x 22 mm
| Model | E20BBATZB / E20WBATZB |
|---|---|
| Communication Protocol | ZigBee 3.0 |
| Protection Level | IP30 |
| Dimensions | 80 x 80 x 22 mm |
| Battery Power | 2xAA |
Product Usage Instructions
Introduction:
The Internet Temperature Regulator is designed to work with a ZigBee
gateway for programming via the ENGO Smart app.
Technical Data:
- Power Source: ZigBee 3.0
- Temperature Regulation Range
- Precision of Temperature Display
- Control Algorithm
- Communication: ZigBee 3.0
- Protection Class: IP30
Installation Steps
- Download the ENGO Smart application from Google Play or the App Store and install it on your mobile device.
- To register a new account, follow the steps to verify your email and set up a login password.
- Ensure that a ZigBee gateway has been added to the application, then proceed to add the thermostat by following the on-screen prompts and naming the device.
Binding – Pairing the Thermostat with a Module/Relay
- Ensure that the module/relay and the thermostat are in the same ZigBee network (added to the same ZigBee gateway).
- To properly link the thermostat with a module or relay, quickly press the button 5 times on the module/relay to enter binding mode (pairing with the thermostat).
- On the thermostat, hold down the indicated button for 5 seconds to activate the bind function, which lasts a maximum of 300 seconds.
- After successful pairing, the devices will be linked, confirmed by the END message and the specific icons on their screens.
Installation of the Regulator in the Application:
- Download the ENGO Smart app from Google Play or Apple App Store and install it on your mobile device.
- Create a new account following the steps provided in the app.
- Ensure the ZigBee gateway is added to the app.
- Add the regulator device to the ZigBee network through the app.
Installer Mode
To enter installer mode, hold down the OK button for 3 seconds.
Warnings
- Remember that the range can be increased by installing ZigBee network repeaters.
- If the thermostat is bound with a module/relay, and the connection between the devices is lost, the module/relay will turn off after 50 minutes.
Binding Process:
- Ensure the regulator and module/relay are in the same ZigBee network.
- Quickly press the button on the regulator five times to initiate binding mode.
- Hold the bind function on the regulator.
- The binding process lasts a maximum of 300 seconds.
- Once successfully paired, an “END” message will display.
Service Parameters
P01
Heating/Cooling Algorithm: TPI UFH for underfloor heating, HIS 1.0 for coolingP02
Control method of the heating/cooling systemP04
Minimum set temperatureP05
Maximum set temperatureP06
PIN code for installer settings: Active/InactiveP07
User PIN valueP08
Key lock: Yes/NoReset
Factory resetAdditional Information
For more details on the ENGO E20 and heating control solutions, visit ENGO Controls.
Internetowy regulator temperatury, ZigBee
E20WBATZB E20BBATZB Skrócona instrukcja
Ver. 1 Data wydania: VIII 2023
Producent: Engo Controls S.C. 43-200 Pszczyna ul. Górnolska 3E Polska
Dystrybutor: QL CONTROLS Spzo.o.Sp.k. 43-262 Kobielice ul. Rolna 4 Polska
www.engocontrols.com
FAQs
Q: How can I extend the range of the ZigBee network?
A: You can increase the range by installing ZigBee network repeaters.
Q: What happens if the connection between the regulator and
module/relay is lost?
A: If the regulator is bound to a module/relay and connectivity is
lost, the module/relay will turn off after 50 minutes.
How can I extend the range of the ZigBee network?
You can increase the range by installing ZigBee network repeaters.
What happens if the connection between the regulator and module/relay is lost?
If the regulator is bound to a module/relay and connectivity is lost, the module/relay will turn off after 50 minutes.
What is the ENGO E20?
The ENGO E20 is an internet temperature regulator using the ZigBee communication protocol.
How do I install the ENGO E20?
Installation involves downloading the ENGO Smart app, registering an account, and adding the thermostat to the ZigBee network via the app.
What are the key features of the ENGO E20?
It includes battery-powered operation, ZigBee 3.0 communication, and compatibility with the ENGO Smart/Tuya Smart applications.
How can I extend the range of my ZigBee network?
The range can be increased by installing ZigBee network repeaters.
What happens if the thermostat loses connection with its paired module/relay?
If connection is lost and the thermostat is bound with a module/relay, the module/relay will turn off after 50 minutes.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>