Beefurni ‎BF03002_1 Deck Tiles Instruction Manual

Beefurni ‎BF03002_1 Deck Tiles

Product Information

Specifications

• Product : Wood Deck Tiles
• Treatment : Pre-treated with water-based wood oil
• Durability : Suitable for outdoor use

Cleaning & Maintenance

Our Wood Deck Tiles are pre-treated with water-based wood oil to ensure durability for outdoor use. However, wood is a natural material that ages and requires gradual cleaning and maintenance.
The best way to extend the life of your Deck Tile is by cleaning them regularly, not leaving them outdoors unprotected more than necessary, and re- staining them regularly.

How to Clean

It’s easy to clean these Wood Deck Tiles. Follow these steps:

1. Use mild soap and water to clean the area.
2. Scrub the deck with a mop that has a sponge head to avoid scratching the Tiles.
3. Rinse with a garden hose after mopping.
4. If leaves or other debris fall between the gaps in the Tiles, use a vacuum cleaner to remove them.
5. If necessary, disassemble the tiles to clean underneath.

How to Maintain

You can easily refresh your Deck Tiles and enhance their durability by re- staining them regularly, for example, once a year. Follow these steps:

1. Choose a place in the shade for cleaning, re-staining, and leaving the Deck Tiles to dry. Avoid direct sunlight.
2. Give the surface a thorough clean with mild soap and a brush. Wipe them dry or let them air dry for at least 24 hours.
3. If wood fibers rise after cleaning, sand the surface with fine-grade sandpaper in the direction of the grain.
4. Give the chosen deck stain a good stir and apply a thin, even coat of stain to the surface using a brush, a roller, or paint pads. Apply them on the entire surface at once and in the direction of the grain.
5. Put some extra stains over any splits or cracks to help fill them in.
6. Only apply as much as the wood can easily absorb.
7. Leave the surface to dry and apply further coats if needed.

How to Store

Disassemble and store your Deck Tiles during the snowy season. Follow these steps:

1. Clean the tiles thoroughly before storing them and let them dry.
2. If possible, store your Deck Tiles in a cool and dry indoor place. If stored outside, put them under a roof if possible or cover them with a protective cover.
3. Allow air to ventilate to avoid moisture and mold.

Customer Service
If you have any problems or questions, please contact us via email at support@beefurni.com. As a valued customer, your satisfaction is our #1 priority!

Thank You
Thank you for choosing us! Our goal is to provide high-quality outdoor furniture with outstanding customer service – all at an affordable price.

FAQ

• Q: How often should I clean the Wood Deck Tiles?
  A: It is recommended to clean them regularly to maintain their appearance and longevity.

• Q: Can I use a pressure washer to clean the Deck Tiles?
  A: It is not recommended to use a pressure washer as it may damage the wood. Stick to mild soap and water.

• Q: How frequently should I re-stain the Deck Tiles?
  A: Re-staining once a year is typically sufficient, but the frequency may vary depending on your climate and the level of sun and rain exposure.

• Q: Can I use any deck stain for re-staining the Deck Tiles?
  A: Yes, you can choose any deck stain of your preference. Ensure it is suitable for outdoor use and follow the application instructions provided by the stain manufacturer.

IMPORTANT NOTE:
Before assembling these deck tiles, please make sure the underneath surface is LEVEL and CLEAN of dirt and grime. Clear away rocks and weeds. These wood tiles are most easily installed over hard, flat surfaces like concrete or decking.

1. Step 1 : Find Tile A and Tile B with sides as illustrated in the picture.

2. Step 2 : Place Tile A under the floor, align the sides of these tiles together, then tilt Tile A at an angle of 30 degrees with one hand.
   Remember to always hold the Tiles at a 30-degree angle during snapping.

3. Step 3: Use the other hand or a rubber hammer to firmly press Tile A down, ensuring a proper connection to the holes in Tile B.
   When you hear a “clicking sound”, the Tiles are snapped.
   When finished, you can easily trim the outer edges with a saw for a clean look.

CLEANING & MAINTENANCE

Our Wood Deck Tiles are pre-treated with water-based wood oil to ensure durability for outdoor use. However, wood is a natural material that ages and requires gradual cleaning and maintenance. The best way to extend the life of your Deck Tile is by cleaning them regularly, not leaving them outdoors unprotected more than necessary, and re-staining them regularly.

HOW TO CLEAN

• It’s easy to clean these Wood Deck Tiles. Simply use mild soap and water to clean the area.
• You can scrub the deck with a mop that has a sponge head to avoid scratching the Tiles.
• After mopping, rinse with a garden hose. Leaves or other debris that fall between the gaps in the Tiles can usually be removed with a vacuum cleaner. If necessary, the tiles can be disassembled to clean underneath.

HOW TO MAINTAIN
You can easily refresh your Deck Tiles and enhance their durability by re- staining them regularly, for example, once a year. The frequency of re- staining Decking Tiles may vary depending on the climate you live in and the degree of exposure to sun and rain. Re-staining prevents the surface from drying out, and cracking, and helps avoid moisture penetration into the wood

HOW TO RE-STAIN
Choose a place in the shade for cleaning, re-staining, and leaving the Deck Tiles to dry. Avoid direct sunlight. Simply follow these steps to re-stain your Decking Tile:

1. Give the surface a thorough clean with mild soap and brush. Then wipe them dry or let them air dry for at least 24 hours. If wood fibers rise after cleaning, sand the surface with fine-grade sandpaper. Be sure to sand them in the direction of the grain.
2. Give the chosen deck stain a good stir and apply a thin, even coat of stain to the surface using a brush, a roller or paint pads. Apply them on the entire surface at once and in the direction of the grain. Put some extra stains over any splits or cracks to help fill them in.
3. Only apply as much as the wood can easily absorb. Leave the surface to dry and apply further coats if needed.

HOW TO STORE

Disassemble and store your Deck Tiles during the snowy season. Before storing, clean and let them dry thoroughly. If possible, store your Deck Tiles in a cool and dry indoor place. If stored outside, put them under a roof if possible or cover them with a protective cover. Allow air to ventilate, to avoid moisture and mold.

THANK YOU FOR CHOOSING US!

Our goal is to provide high-quality outdoor furniture with outstanding customer service – all at an affordable price.
If you have any problems, please contact us via the purchased website. As a valued customer, your satisfaction is our #1 priority!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>