thomann 537112 01 Achat Amprack MK II User Manual
- June 17, 2024
- Thomann
Table of Contents
thomann 537112 01 Achat Amprack MK II User Manual
Dear customer,
Thank you for purchasing this amp rack.
The DSP in this rack has been pre-programmed for various the box pro Achat
loudspeaker systems. To select the desired preset, proceed as follows:
- press the PRESET button (2)è The “Load Preset” menu opens.
- use the rotary control (3) to select the corresponding Press the rotary control to confirm.
The settings are loaded.
The connection panel is prepared for four-pin system wiring.
To use the connections for the Achat system wiring, turn the cover of the
connection panel so that the cut-outs are in a vertical position.
These connections enable simple cabling with four-core cables, as the tops
receive their signal on wires 1+/ 1- and connect wires 2+/ 2- through; the
bass is connected to wires 2+/2- and connects wires 1+/ 1- through. The order
in which the speakers are wired is not important. However, note the minimum
load impedance of the amplifiers.
A Y-split cable (article number 459796) is recommended for conventional wiring
via the connection panel. The connection sockets on the connection panel are
wired as follows: The signals of the t.amp E-1200 mid/high power amplifier are
on 1+/1-, the signals of the t.amp E-1500 bass power amplifier are on 2+/2-.
If you have any questions, please feel free to contact our sound department
team.
You can reach us by phone on +49 9546 9223-35, by email at pa@thomann.de
or via live chat. We hope you enjoy your new PA!
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>