ATAG DW7214MC Dishwasher User Manual

ATAG DW7214MC Dishwasher

Product Information

Specifications

• Model: DW7214MC
• Product Type: Dishwasher

Your dishwasher

The DW7214MC dishwasher is a high-quality appliance designed to efficiently clean your dishes. It features various settings and functions to ensure optimal dishwashing results.

On/Off

The On/Off button is used to turn the dishwasher on or off. Press the button to power on or power off the appliance.

Display

The display panel shows important information and allows you to select different settings and programs for your dishwasher.

Start/Stop

The Start/Stop button is used to start or pause the dishwashing cycle. Press the button to begin the cycle and press it again to pause or stop the cycle.

Select program

The Select program button allows you to choose the desired dishwashing program. Use the button to scroll through the available programs and select the one that suits your needs.

Symbols on the display:

• Auto door open: Indicates when the dishwasher automatically opens the door after completing a cycle to aid in drying.
• Top up rinse aid: Indicates when the rinse aid level is low and needs to be refilled.
• Top up salt: Indicates when the salt level is low and needs to be refilled.

Select program mode Auto door open

In this mode, the dishwasher automatically opens the door at the end of the cycle for improved drying performance. Select this mode if you want the door to open automatically.

Delayed start

The delayed start function allows you to set a specific time for the dishwasher to start the cycle. Use this function if you want the dishwasher to start at a later time.

Text on the display:

• Clean the filters: Indicates that the filters need to be cleaned. Refer to the chapter on Care and cleaning for instructions.
• Run Self-cleaning: Indicates that the dishwasher needs to run a self-cleaning cycle. Refer to the chapter on Care and cleaning for instructions.
• See the chapter Care and cleaning: Indicates that you should refer to the chapter on Care and cleaning for further instructions.

Install the dishwasher, see the chapter Installation. Then open the door and press .

This instruction is related to the installation process of the dishwasher. Please refer to the chapter on Installation in the user manual for detailed installation instructions.

First time setup.

The “First time setup” message appears on the display when you switch on the dishwasher for the first time. It is important to choose the right settings during this setup to ensure optimal dishwashing results. Refer to page 7 of the user manual for instructions on the first time setup.

Product Usage Instructions

Safety Instructions

WARNING! Knives and other pointed items must be placed with the points down in the cutlery basket or horizontally in other baskets.

Child lock

You can activate the Automatic child lock setting to prevent children from starting the dishwasher. Refer to the chapter on Settings for instructions on how to activate and deactivate the Child lock function.

Installation

For detailed instructions on how to install the dishwasher, please refer to the chapter on Installation in the user manual.

Overflow guard

The overflow guard is a safety feature that pumps out excess water and shuts off the water supply if the water level in the dishwasher exceeds the normal level. If the overflow guard is triggered and “F54” (Overfilling water) appears on the display, turn off the water tap and contact your nearest service center. Do not remove the plug from the wall socket until the water tap has been turned off to avoid water leakage outside the dishwasher.

Packaging

When disposing of the dishwasher, follow the recycling guidelines. Pull out the power cable and cut it as short as possible. Remove any light sources. Contact your local authority for information on how to correctly recycle your dishwasher.

Symbols on the appliance

• Read the user manual: It is important to read and understand the user manual before using the dishwasher.
• Recycle as electrical waste: Dispose of the dishwasher as electrical waste in accordance with local regulations.
• Approved in accordance with relevant EU directives: The dishwasher meets the standards and requirements set by the European Union.
• Approved in accordance with relevant UK legal requirements: The dishwasher meets the legal requirements set in the United Kingdom.

Before washing for the first time

Water hardness:

In order to achieve good dishwashing results, it is important to consider the water hardness in your area. Hard water can leave a white coating on dishes and inside the dishwasher.

Contact your local waterworks to check the water hardness in your area. Make a note of the water hardness value.

Recommended setting:

Based on the water hardness value, refer to the table below to determine the recommended setting for the dishwasher’s water softener:

Increased consumption during regeneration:

The dishwasher’s built-in water softener needs regular regeneration to maintain its function. The frequency of regeneration depends on the selected setting and may result in increased energy and water consumption.

FAQs

1. What should I do if the dishwasher’s water level exceeds the normal level?
   • If the overflow guard is triggered and “F54” (Overfilling water) appears on the display, turn off the water tap and contact your nearest service center. Do not remove the plug from the wall socket until the water tap has been turned off to avoid water leakage outside the dishwasher.
2. How do I activate and deactivate the Child lock function?
   • To activate or deactivate the Child lock function, press and hold the designated buttons for three seconds. Refer to the chapter on Settings for more information.
3. How can I ensure optimal dishwashing results?
   • To achieve optimal dishwashing results, make sure to select the right settings during the first time setup. Additionally, consider the water hardness in your area and set the dishwasher’s water softener accordingly. Clean the filters regularly and run a self-cleaning cycle when necessary. Refer to the user manual for detailed instructions.

USER MANUAL Dishwasher EN

DW7214MC

Your dishwasher

On/Off

Display

Start/Stop

Select program
Symbols on the display: Auto door open Top up rinse aid Top up salt

Select program mode Auto door open
Delayed start
Text on the display: Clean the filters Run Self-cleaning See the chapter Care and cleaning.

Install the dishwasher, see the chapter Installation. Then open the door and press .
“First time setup.” is shown on the display the first time the dishwasher is switched on. It is important that you choose the right settings to ensure good dishwashing results. See page 7.

3

Safety instructions

· Read the user manual and keep it in a safe place! · Number of standard place settings: 14 · Never use the dishwasher for any purpose other than that
specified in these operating instructions. · Do not load the dishwasher door or dishwasher baskets with
anything other than dishes. · Never leave the dishwasher door open as someone may trip on
it. Push the baskets in to avoid risking the dishwasher tipping over. · Use only dishwasher detergent! · This machine can be used by children aged 8 and upwards, and by people with reduced physical capacity, mental ability, memory loss or lacking experience and knowledge. These individuals must be supervised when using the machine or have instructions on how to use the machine and understand the risks that can occur. Cleaning of the machine must not be carried out by children without supervision. · Damaged supply cord must only be replaced by the manufacturer’s service centre or someone similarly professionally qualified. · Only use the dishwasher in household-type environments for dishwashing household dishes. All other use is prohibited. · Never place dishes with solvent residues in the dishwasher due to the risk of explosion. Nor may dishes that contain ash, wax or lubricants be washed in the dishwasher. · Children must be watched. Do not allow children to use or play with the dishwasher. Be especially vigilant when the door is open. Some detergent may remain inside! After adding detergent, always start the dishwasher immediately.
WARNING!
Knives and other pointed items must be placed with the points down in the cutlery basket or horizontally in other baskets.
4

Safety instructions
WARNING! Children must be supervised ­ dishwasher detergent is corrosive!
Child lock
You can activate the Automatic child lock setting to prevent children from starting the dishwasher. See the chapter Settings. You can also temporarily activate and deactivate the Child lock function. Press and hold and for three seconds.
Installation
See the chapter Installation.
Declaration of conformity
We hereby declare that this appliance is in conformity with the relevant European directives and the requirements of the relevant standards.
Overflow guard
The overflow guard starts pumping out the water and turns off the water supply if the water level in the dishwasher exceeds the normal level. If the overflow guard is triggered, F54 (Overfilling water) appears on the display. Turn off the water tap and contact your nearest service centre. (To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!)
Packaging
The outer packaging protects the product during transport. The packaging material is recyclable. Separate the different packaging materials to help reduce raw material use and waste. Your dealer can take the packaging for recycling or direct you to the nearest recycling centre. The packaging is comprised of: · Corrugated cardboard made from up to 100% recycled material. · Expanded polystyrene (EPS) with no added chlorine or fluorine. · Supports made from untreated wood. · Protective plastic made from polyethylene (PE).
Disposal
The dishwasher is manufactured and labelled for recycling. When the dishwasher has reached the end of its service life and is to be disposed of, it should immediately be made unusable. Pull out the power cable and cut it as short as possible. Remove the light source/light sources. Contact your local authority for information about where and how your dishwasher should be correctly recycled.
5

Safety instructions
Symbols on the appliance
Read the user manual. Recycle as electrical waste. Approved in accordance with the relevant EU directives. Approved in accordance with the relevant UK legal requirements.
6

Before washing for the first time

Water hardness
In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness Water hardness is specified using German degrees of water hardness (°dH), French degrees of water hardness (°fH), English degrees of water hardness (°eH) or millimoles per litre (mmol/l).
A water supply with a water hardness in excess of 5°dH (9°fH / 6°eH / 0.9 mmol/l) must be softened. This is done automatically with the aid of the built-in water softener. In order for the water softener to function properly, its settings must be adjusted to the hardness of the water supply. Once you have adjusted the water softener settings, add detergent and rinse aid in doses suitable for soft water.
Contact the local waterworks to check the water hardness in your area.
Make a note of the water hardness:____

°dH 0-5 6-8 9-11 12-14 15-19 20-24 25-29 30-39 40-49 50

°fH 0-9 10-14 15-20 21-25 26-34 35-43 44-52 53-70 71-88 89

°eH 0-6 7-10 11-14 15-18 19-24 25-30 31-36 37-49 50-61 62

mmol/l 0.0-0.9 1.0-1.4 1.5-2.0 2.1-2.5 2.6-3.4 3.5-4.3 4.4-5.2 5.3-7.0 7.1-8.8 8.9

Recommended setting 0 1 2 3 4 5 6 7 8 9

If the water hardness exceeds 50°dH (89°fH / 62°eH / 8.9 mmol/l), we recommend connecting an external water softener.
Increased consumption during regeneration The dishwasher’s built-in water softener is regularly regenerated to maintain its function. Regeneration extends the dishwashing program and increases energy and water consumption. Just how often the dishwasher’s water softener is regenerated depends on the selected setting.
Example: If the Eco program is run with a water hardness of 14°dH (25°fH / 18°eH / 2.5 mmol/l), the water softener is regenerated at regular intervals (after 7 dishwashing cycles), energy consumption increases by 0.015 kWh, and water consumption increases by 2.3 litres, while the program time is extended by 3 minutes. Regeneration takes place during the program’s main wash.

7

Before washing for the first time

WARNING!
Hard water leaves a white coating on dishes and inside the dishwasher. It is therefore important that you select the right setting for the water softener! See Water hardness.
Never run the dishwasher with an empty salt compartment if the water supply has a water hardness in excess of 5°dH (9°fH / 6°eH / 0.9 mmol/l).

Basic settings
Open the door. Press .

“First time setup.” is shown on the display. It is important that you choose the right settings to ensure good dishwashing results.

Select setting with

. Confirm selected setting with .

Settings 1. Language 2. Set level of rinse aid
0/1/2/3/4/5 Pre-selected at factory: 4
3. Set water hardness 0/1/2/3/4/5/6/7/8/9 Pre-selected at factory: 4
4. TAB On/Off (All-in-one detergent) Pre-selected at factory: Off

Select the language to be shown on the display.
Drying is faster and a better result is achieved if you use rinse aid. You will also achieve a better dishwashing result with clear and spotless dishes. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High dosage).
Adjusting the water softener. Select a setting depending on the hardness of the water supply. It is important that this setting is correct! For a water supply with a hardness above 5 °dH (9 °fH / 6 °eH / 0.9 mmol/l), fill with salt. For a water supply with a hardness below 6°dH (10°fH / 7°eH / 1.0 mmol/l), select 0. The water softener is deactivated and no salt needs to be added.
Activate this setting when using an all-in-one detergent that contains rinse aid. This setting reduces the rinse aid dosage and affects how often the dishwasher’s built-in softener is regenerated.

To change the selected setting, see the chapter Settings.

8

Before washing for the first time
Top up rinse aid
Top up the rinse aid compartment with rinse aid if you have selected Rinse aid 1 – 5. Lift up to open
Press to close 1. Open the rinse aid compartment lid. 2. Carefully top up with rinse aid to the level marked MAX. 3. Wipe up any splashes of rinse aid around the compartment. 4. Close the lid firmly. When the rinse aid needs topping up, the symbol lights on the display.
Top up salt
For a water supply with a hardness above 5 °dH (9 °fH / 6 °eH / 0.9 mmol/l), fill with salt. Add salt to the salt compartment if you have selected Water hardness 1 – 9.
1. Remove the salt compartment lid by turning it anticlockwise. 2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. Before
washing for the first time, pour in about 1 l of water. (Water is only needed the first time.) 3. Add enough salt to fill the salt compartment (max. 750 gram). Use special dishwasher salt. 4. Wipe up any excess salt so that the lid can be screwed on firmly. When the salt needs topping up, the symbol lights on the display.
WARNING!
In order to avoid rust stains a dishwashing program must be started immediately after adding salt. Never pour dishwasher detergent into the salt compartment. This destroys the water softener!
9

Greener dishwashing
Save energy and water
When using a dishwasher in a residential setting, less energy and water are generally used compared to washing the dishes by hand. Do not rinse under running water Do not rinse the dishes under running water as this will lead to increased energy and water consumption. Simply scrape off large food particles before loading the dishwasher. Choose a green detergent Read the environmental declaration on the packaging! Too much detergent, rinse aid and salt can result in less effective dishwashing and also entail greater environmental impact. Run a fully loaded dishwasher Save energy and water by waiting until the dishwasher is full before running a program (see number of standard place settings). Use the Rinse and hold program to rinse the dishes if there are any unpleasant odours. You can also use the Anti-odour program to prevent bad odours from dirty dishes left in the dishwasher. Run programs at a lower temperature If the dishes are only slightly dirty, you can select a program with a low temperature. Select dishwashing program ­ Eco This program is suitable for washing normally soiled dishes and is the most effective program in terms of combined energy and water consumption. This program is used to assess compliance with EU legislation on ecodesign. The dishwashing program is designed for an effective wash using as little energy and water as possible. The program washes at a low temperature for a long time. Select option ­ Auto door open Better drying results are achieved if you use the Auto door open option, which automatically opens the dishwasher door. Wait until the dishwasher indicates that the programme has ended and the dishes have cooled before unloading the dishwasher. Connect to cold water Connect the dishwasher to the cold water supply if the building is heated using oil, electricity or gas. Connect to hot water Connect the dishwasher to the hot water supply (max. 70 °C) if the building is heated using an energy-efficient means such as district heating, solar power or geothermal power. Choosing a hot water connection reduces the dishwasher’s energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain materials used in some cookware cannot withstand high heat. See Fragile dishes in the chapter Loading the dishwasher.
10

Loading the dishwasher

Fragile dishes
Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand high heat, others can be damaged by dishwasher detergent. Exercise caution with, for example, handmade items, fragile decoration, crystal/glassware, silver, copper, tin, aluminium, wood and plastic. Look for the “Dishwasher safe” marking. Fragile decoration Porcelain with decoration on top of the glazing (the items feel rough) should not be washed in a dishwasher. Crystal/Glass Drying is faster and a better result is achieved if you use rinse aid. You will also achieve a better dishwashing result with clear and spotless dishes. Hand-painted glassware, as well as antique and very fragile items, should not be washed in a dishwasher. Silver Silver and stainless steel items should not come into contact, as the silver can become discoloured. In order to avoid marks and tarnishing, separate dishes made from different metals, such as silver, stainless steel and aluminium. Aluminium Aluminium can lose its shine if washed in a dishwasher. However, good quality aluminium pans can be washed in a dishwasher, even if some of the shine will be lost. Cutlery with glued handles Some types of glue are not dishwasher safe. In such cases, the handles may loosen.
Loading affects the results
Load the dishes carefully to ensure the best washing and drying results with the lowest possible energy and water consumption. Give your dishwasher the best chance to reach and clean all surfaces, as well as to dry the dishes as thoroughly as possible. · All dirty surfaces should face inwards and downwards! · Dishes should not be placed in or on each other. · Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important
for plastic items. · Make sure small items cannot fall through the dishwasher basket; place them in the top cutlery
tray.
NOTE!
Check that the spray arms can rotate freely.
11

Loading the dishwasher
The dishwasher’s baskets
The dishwasher is equipped with a top cutlery tray, an upper basket and a lower basket with a cutlery basket. The appearance of the baskets may differ depending on the dishwasher setup.
Top cutlery tray
The top cutlery tray has space for cutlery, ladles, whisks, serving cutlery and similar items. Avoid placing tall objects in the top cutlery tray. They can block the top spray arm.
Raising the top cutlery tray 1. Pull out the top cutlery tray. 2. Pull forward the two locking handles on either side to raise the top cutlery tray. Lowering the top cutlery tray 1. Make sure the upper basket is in the lowest position. 2. Pull out the top cutlery tray. 3. Slide the two locking handles on either side downwards and backwards to lower the top cutlery
tray.
12

Loading the dishwasher
Upper basket
Place glasses, cups, bowls, side plates and saucers in the upper basket. All dirty surfaces should face inwards and downwards! Wine glasses are placed on the wine glass shelf and knives are placed in the knife stand on the right.
Knife stand Raising the upper basket 1. Pull out the upper basket. 2. Grab the sides of the upper basket with both hands and lift it up. Lowering the upper basket 1. Pull out the upper basket. 2. Grab the sides of the upper basket with both hands and push in the two locking handles to lower
the upper basket.
13

Loading the dishwasher
Lower basket
Place plates, side plates, serving dishes, pots and cutlery (in the cutlery basket) in the lower basket.
Adjustable plate supports The adjustable plate supports can be adjusted to suit the dishes. Release the plate supports by pushing them inwards before repositioning them. The plate supports can also be folded down to make it easier to load pots and bowls.
14

Loading the dishwasher
Adaptable power zones The dishwasher’s two adaptable power zones can be opened in two different positions or turned off.
For vases and slim items For pots and pans For higher spray pressure in the lower spray arm
Pre-selected at factory: Off
Leave the power zones open if you want an increased water flow where, for example, you have placed pots and pans or vases and slim items. Turn the dishwasher’s power zones off if you want greater spray pressure in the lower spray arm. Washing large plates You can adjust the lower basket for plates with a diameter of 25-31 cm by moving the adjustable plate supports and their fixtures to increase the distance between the tine rows.
Cutlery basket
Place cutlery with the handles facing down, except for knives, and spread them out as much as possible. Ensure that spoons do not stack inside each other. The cutlery basket is best placed in the middle at the front of the lower basket to best utilise dishwashing performance from the unique spray zone intended for the cutlery basket.
WARNING!
Knives and other pointed items must be placed horizontally in the dishwasher’s special cutlery baskets.
Fold-down section for small items The cutlery basket has a fold-down section in the middle for small items or small shafts (such as electric whisk attachments).
15

Using the dishwasher

Add detergent
Follow the instructions on the detergent packaging. This dishwasher is fitted with a water softener, so use detergent and rinse aid doses suitable for soft water.
Too much detergent can result in less effective dishwashing and also entails greater environmental impact.
Detergent compartment The detergent compartment must be dry when adding detergent.
If powder or liquid dishwasher detergent is used, add a small amount of the detergent to the compartment for prewash detergent.

Prewash detergent

Main wash detergent

Press to open

Close the lid

NOTE!
Use only dishwasher detergent! Washing up liquid must not be used as the foam that forms prevents the dishwasher from operating effectively.

All-in-one detergent There are many types of all-in-one detergents on the market. Read through the directions for these products carefully.
Activate the TAB setting when using an all-in-one detergent that contains rinse aid.
Dishwasher tablets are not recommended for short programs (less than 75 minutes). Use powder or liquid dishwasher detergent instead.
NOTE!
Optimal washing and drying results are achieved by using normal detergent together with separately dispensed rinse aid and salt.

Contact the detergent manufacturer if you have questions about the detergent.

16

On/Off

Using the dishwasher
Start/Stop

Select program

Select program mode Select option

On/Off
Open the door and press . Also turn on the water tap if it is turned off.

Select program
Eco is always pre-selected. To select another program, press shown on the display.

until the desired program is

Select a program to suit the type of dishes and how dirty they are.

Eco This program is suitable for washing normally soiled dishes and is the most effective program in terms of combined energy and water consumption. This program is used to assess compliance with EU legislation on ecodesign.
You can read more about greener dishwashing in the chapter Greener dishwashing.
For heavily soiled dishes with a lot of grease, a program with higher temperatures should be used.

Universal An effective program for daily use for slightly dried leftovers. (This program is not intended for burnt food, such as on oven dishes.)
Intensive A program with a high temperature for dissolving grease on very dirty dishes, such as pans, casserole dishes and oven dishes. If these dishes do not completely fill the dishwasher, you can add plates and other dishes.

Quick 1) A fast and effective program for slightly dried leftovers. (This program is not intended for burnt food, such as on oven dishes.)
The Auto door open option is important for ensuring the best drying results.

1. When combined with Speed, the program is shortened (60 minutes). 17

Using the dishwasher

Time program
The program adapts to the specified running time or finish time. With this program it is important to choose a time suited to how dirty the dishes are.

Press to set the desired program time.

0:15-0:45 1:00-1:30 2:00-2:30

Slightly dirty dishes Normally dirty dishes Very dirty dishes

Hygiene This program is ideal to use where demands on hygiene are extra high, e.g. for baby bottles and cutting boards. The temperature is high both in the main wash and in the final rinse.
Rinse and hold Used to rinse dishes while you wait for the dishwasher to become fully loaded.
Self-cleaning Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes. This program should be run (with no dishes in the machine) using normal dishwasher detergent or citric acid. Special dishwasher cleaners are also available on the market. For the removal of limescale deposits, see Dishwasher tub in the chapter Care and cleaning.
Anti-odour 2) This program prevents bad odours from dirty dishes left in the dishwasher. Only the dishwasher’s fan is activated (at regular intervals during a period of 72 hours).
Select program mode
Press to scroll through the available program modes. The symbol is dimly lit in available program modes, and glows brighter when a program mode has been activated. (The program modes you can select vary between programs.)
Speed The program time is shortened, but the dishwasher uses more energy.
Night Lower noise level during the dishwashing program. The program time is extended.

2. Activate Odour control in the dishwasher’s Settings menu. See the Settings chapter. 18

Using the dishwasher

Select option
Available options are dimly lit. Select the options ( , ) to activate them. The options glow brighter when activated. (The options you can select vary between programs.)
Auto door open The dishwasher door opens automatically, which shortens the program time and improves the drying results. Wait until the dishwasher indicates that the program has ended and the dishes have cooled before unloading the dishwasher.
The drying time of the Auto door open option varies (from 5 to 90 minutes) depending on the model, program and temperature of the final rinse.
The Auto door open option is pre-selected for some programs.
NOTE!
For the best drying results, do not close the door before the drying phase has finished and the machine has automatically switched off.

WARNING!
The dishwasher door must not be blocked or closed when opened automatically. Doing so may damage the door lock mechanism. Wait at least 5 minutes before closing the door.

Delayed start When you select Delayed start, the dishwasher will start 1-24 hours after you have pressed and closed the door.
1. Press once to activate Delayed start. Press several times, or hold it in, to set the desired number of hours.
2. Press and close the door. The timer counts down and the dishwasher starts after the selected delay.

If you want to cancel the Delayed start option, open the door then press and hold seconds.

for three

Start/Stop
Press until the display shows “Program started”. This indicates that the dishwasher is ready to start. Close the door properly, otherwise the dishwasher will not start.
If the dishwasher is not started or the door is not closed within 2 minutes of the last time the control panel was pressed, the machine switches off.
Stopping or changing a program If you want to change program after starting the dishwasher, open the door then press and hold for three seconds. Add more detergent if the lid of the detergent dispenser has opened. Then select a new program, press and close the door.
Remaining time Once you have selected a program, program mode and options, the time the program took when last used is displayed.

19

Using the dishwasher
Status light
The status light at the bottom on the dishwasher provides information by means of 3 different colours.
Status light
Blue – Load more The program has started, but you can still load more dishes. Red – Do not load You should not load more dishes (risk of poorer dishwashing result). A flashing light indicates that the door has been opened while a program is in progress. If it flashes when the door is closed, an error has occurred. See the chapter Troubleshooting. Green – Unload The dishwashing program is finished. The status light stays on for 15 minutes.
If you want to load more dishes3)
Open the door. The dishwasher stops automatically. Add the dishes and close the door. After a while, the dishwasher continues the program.
Power failure
If the dishwasher is turned off due to a power failure when a dishwashing program is running, the program continues when power is restored. If the power is cut during drying, the program is interrupted. If you open the door for more than 2 minutes during drying, the program will be interrupted.
Once the program has finished
The end of the program is indicated by one short signal from the buzzer. The chapter Settings describes how to change this function. Moreover, the end of the program is indicated by the status light turning green. Once the dishwasher door is opened and the program has finished “Program done” appears on the display. The dishwasher switches off automatically after the program ends. Shut off the water tap after each use (if required by your insurance company).
3) You should not load more dishes if the status light is red. 20

Using the dishwasher
The best drying results
· Fully load the dishwasher. · Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important
for plastic items. · Top up with rinse aid or increase the rinse aid dosage setting. · Activate the Auto door open option. · Allow the dishes to cool before unloading the dishwasher.
Unloading the dishwasher
Hot porcelain is more fragile. Leave the dishes to cool in the dishwasher before unloading them. Unload the lower basket first to avoid any water drops from the upper basket falling onto the dishes in the lower basket.
21

Program chart
22

Program

Program mode Number

Main wash

/ Option

of prewashes

Number of rinses

Final rinse

Eco 4) Universal Intensive Quick Time program

1

2

0-2

49 °C

2

60 °C

2

70 °C

2

65 °C

3

<65 °C

2

41 °C 60 °C 70 °C 65 °C <65 °C

Consumption values 1)

Cold water 2)

Hot water 3)

Water cons.

Dishwashing Energy

Dishwashing Energy

(liter)

time

(approx. kWh) time

(approx. kWh)

(approx.

(approx.

hrs:min)

hrs:min)

4:10

0.54

4:00

0.3

9.2

2:40

1.1

2:20

0.7

12.5

2:50

1.6

2:30

1.2

16.0

1:30 0:15-2:30

1.3 0.3-1.4

1:30 0:15-2:30

0.9 0.2-1.0

14.5 10.0-16.5

Hygiene

70 °C

2

70 °C

1:05

1.3

0:45

0.9

10.5

Rinse and hold

1

0:07

0.01

0:07

0.01

3.5

Self-cleaning

70 °C

2

70 °C

1:05

1.0

0:45

0.6

10.0

Anti-odour

72:00

0.2

72:00

0.2

1. Consumption values vary depending on the temperature of the incoming water, room temperature, load size, selected additional functions and more. The values for the Eco program are accurate, others are indicative only.
2. Connection to cold water, approx. 15 °C. 3) Connection to hot water, approx. 60 °C. 4) This program is suitable for washing normally soiled dishes and is the most effective program in terms of combined energy and water consumption. This program is used to assess compliance
   with EU legislation on ecodesign. 5) Auto door open

Settings

Open the door and press .

To open the dishwasher’s Settings menu, press and confirm your selection with .

until Settings menu is shown on the display

To exit the dishwasher’s Settings menu, select Exit and confirm your selection with .

Select setting

Confirm current setting

Settings

Alternatives

1. Language

You can choose the language used for the display.

2. Automatic child lock On/Off

You can activate the Automatic child lock setting to prevent children from starting the dishwasher.
To temporarily deactivate or activate the Automatic child lock setting, press and hold
and for three seconds.

3. Display

Contrast 1/2/3/4

For adjusting the contrast of the display.

Program Info screen T/S You can select which information is shown on the display.
T-Text

S-Symbol

4. Sound 5. Rinse aid

Feedback 0/1/2/3 Notification 0/1/2/3
0/1/2/3/4/5

A beep confirms that the control panel has been pressed.
The buzzer indicates when a dishwashing program has ended. Error messages are always indicated by a loud buzzer.
Setting for rinse aid dosage. The rinse aid dispenser can be adjusted between 0 (Off) and 5 (High dosage). Increase the rinse aid dosage: · If the dishes have water marks.
Decrease the rinse aid dosage: · If the dishes have a sticky white/blue film. · If the dishes are streaked.
23

Settings

Settings

Alternatives

6. Water hardness

0/1/2/3/4/5/6/7/8/9

7. TAB

On/Off

(All-in-one detergent)

8. Super rinse

On/Off

9. Interior light at power off

On/Off

10. Odour control

On/Off

11. Failure readout

12. Factory reset
24

· Build-up of foam. If you have very soft water, the rinse aid can be diluted 50:50 with water.
Adjusting the water softener. Select a setting depending on the hardness of the water supply. It is important that this setting is correct! See Water hardness in the chapter Before washing for the first time. For a water supply with a hardness above 5 °dH (9 °fH / 6 °eH / 0.9 mmol/l), fill with salt. For a water supply with a hardness below 6°dH (10°fH / 7°eH / 1.0 mmol/l), select 0. The water softener is deactivated and no salt needs to be added.
Activate this setting when using an all-in-one detergent that contains rinse aid. This setting reduces the rinse aid dosage and affects how often the dishwasher’s built-in softener is regenerated.
The Super rinse function rinses the dishes an extra two times. The program time is extended and the dishwasher uses more energy and water. Activated in the following programs: Universal Intensive Quick Hygiene
Select whether the interior light is to be switched on when the dishwasher is turned off and the door is opened. (If is turned on, the interior light is always switched on when the door is opened.)
When Odour control is activated, Anti-odour can be selected from the program table.
Any error messages. When contacting your service centre, you may be asked to provide the most recent error messages.
Restores all settings to the factory defaults. Select Factory reset and press .

Settings 13. Exit

Alternatives

Settings
To exit the dishwasher’s Settings menu, select Exit and press .

25

Care and cleaning

Top up rinse aid
See the chapter Before washing for the first time.
Top up salt
See the chapter Before washing for the first time.
Clean the filters
Coarse filter The coarse filter traps larger food particles, which cannot get past the drainage pump. Empty the coarse filter when necessary. It should be cleaned at regular intervals depending on how often the dishwasher is used.
Coarse filter 1. Lift the coarse filter by the handle. 2. Empty the coarse filter. 3. Refit the coarse filter. Press it down until it clicks into place. Fine filter Debris that collects on the fine filter is automatically rinsed away during each wash. Clean the fine filter when necessary. It should be cleaned at regular intervals depending on how often the dishwasher is used.
Fine filter 1. Turn the locking ring anticlockwise and lift the fine filter straight up. 2. Clean the fine filter. 3. Refit the fine filter and turn the locking ring clockwise to its stop position. Check that the edges
seal properly. Remember to refit the coarse filter!
26

Care and cleaning
NOTE!
Dishwashing results may be affected if the coarse and fine filters are incorrectly fitted. The dishwasher must not be used without the filters in place!
Check that the yellow drainage pump stop (on the right in the bottom drain) is in place.
Cleaning the spray arms
Holes and bearings can sometimes become blocked. Remove any debris using a pin or the like. The spray arms also have holes underneath.
To facilitate cleaning you can remove the spray arms. Remember to fit them firmly back into place afterwards. Top spray arm · Pull out the top cutlery tray. Push up on the top spray arm while turning it anticlockwise to release
it.
Upper spray arm · Pull out the upper basket.
27

Care and cleaning
· Unscrew the spray arm bearings anticlockwise to remove the spray arm from the upper basket.
Lower spray arm · Pull the lower spray arm straight up to release it.
Clean the outside of the dishwasher
Door and door seal Open the door. Clean the sides of the door and the door seal regularly with a slightly damp cloth. Clean the door seal at the lower front edge of the dishwasher with a washing-up brush. Control panel Keep the control panel clean. If necessary, wipe it with a dry or slightly damp cloth. Never use cleaning products ­ they may scratch the surface.
Run Self-cleaning
Dishwasher tub The dishwasher tub is made of stainless steel and is kept clean through normal use (when used regularly). If you have hard water, limescale deposits may build up in the dishwasher. If this happens, run the Self- cleaning program with two tablespoons of citric acid in the detergent compartment (with no dishes in the machine). Special dishwasher cleaners are also available on the market.
Remove blockages
Unblocking the drainage pump If the dishwasher still contains water after the program has finished, something may be blocking the drainage pump, which results in the error message Water outlet fault or BLDC drain pump fault.
28

Care and cleaning
1. Turn off the machine using and remove the plug from the wall socket. 2. Remove the coarse filter and the fine filter. 3. Scoop out the water from the dishwasher tub. 4. In order to inspect the drainage pump, remove the yellow drainage pump stop on the right in
the bottom drain. (Use a pair of pliers if necessary.) 5. Turn the pump wheel located behind the drainage pump stop by hand. Carefully remove any
sharp items, such as glass. 6. Refit the drainage pump stop along with the fine and coarse filters. 7. Plug the machine in again.
Drainage pump stop
NOTE!
Do not forget to refit the drainage pump stop. Unblocking the inlet hose filter If the water supply contains small particles, the outer filter on the inlet hose may become blocked, which results in the Water inlet fault error message. 1. Turn off the machine using and remove the plug from the wall socket. 2. Turn off the water tap. 3. Unscrew the inlet hose. 4. Carefully remove the outer filter from the inlet hose and clean it. 5. Refit the filter and check that the gasket is correctly positioned. 6. Screw the inlet hose firmly into place. 7. Plug the machine into the wall socket and turn on the water tap. Allow the pressure to settle for
a while and check that the connection is watertight.
Outer filter on inlet hose Gasket
29

Care and cleaning
Winter storage/Transport
Store the dishwasher above freezing temperature and avoid long transport distances in very cold weather. Transport the dishwasher upright or laying on its back. Before transporting a used dishwasher, or before prolonged storage, water must first be removed from the machine. Run the Self-cleaning program.
30

Troubleshooting

Error messages F10 Overfilling water 1 F11 Water outlet fault F12 Water inlet fault 1
F40 Inlet valve leakage F41 Heater fault 1 F45 Diverter fault F52 Water level fault F54 Overfilling water 2
F56 Circulation pump fault F67 Water inlet fault 2
F68 BLDC drain pump fault

Action
Unblocking the drainage pump. See the chapter Care and cleaning. If the problem persists, contact your nearest service centre.
See “Water remains in the dishwasher” under “Problem” in the table below. If the problem persists, contact your nearest service centre.
Check that the water tap is on. Check that the outer filter on the inlet hose is not blocked. See Unblocking the inlet hose filter in the chapter Care and cleaning. If the problem persists, contact your nearest service centre.
Turn off the water tap and contact your nearest service centre.
Turn off the water tap. Remove the plug from the wall socket and contact your nearest service centre.
Contact your nearest service centre.
Clean the coarse and fine filters. Check that the outer filter on the inlet hose is not blocked. If the problem persists, contact your nearest service centre.
Turn off the water tap and contact your nearest service centre. To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!
Contact your nearest service centre.
Check that the water tap is on. Check that the outer filter on the inlet hose is not blocked. See Unblocking the inlet hose filter in the chapter Care and cleaning. If the problem persists, contact your nearest service centre.
See “Water remains in the dishwasher” under “Problem” in the table below. If the problem persists, contact your nearest service centre.

Press any button to clear the error message.

31

Troubleshooting

Problem

Possible causes

Action

The control panel does not react You have pressed the control Wait a moment then try again.

when pressed.

panel too soon after opening the

door.

Child lock or Automatic child See the chapter Safety

lock is activated.

instructions.

The door is closed.

Open the door. The control panel only reacts to use when the door is open.

Dirt on the control panel.

Clean with a dry or slightly damp cloth.

Cannot close door.

The baskets are not correctly Check that the baskets are

positioned.

correctly positioned horizontally.

Check that the dishes are not blocking the baskets from sliding properly into place.

The door lock does not click into Check the door lock. If it does

place and lock.

not click into place and lock,

open the door.

Press and hold

and

until the display starts flashing.

Wait until it stops flashing (60

seconds). Close the door.

Check that the door lock clicks

into place and locks.

32

Troubleshooting

Problem

Possible causes

Action

The dishwasher does not start.

has not been pressed.

Press until the display shows “Program started”.

The door is not properly closed. Check.

You have opened the

Close the door and wait. After a

dishwasher to add more dishes while, the dishwasher continues

while a program is in progress. the program.

The door lock has not clicked into place and locked.

Check the door lock. If it has not clicked into place and locked, open the door.

Press and hold

and

until the display starts flashing.

Wait until it stops flashing (60

seconds). Close the door.

Check that the door lock clicks

into place and locks and the

dishwasher starts.

Check whether the Delayed start Press and hold for three

option has been selected.

seconds if you want to cancel

the Delayed start option.

The plug is not plugged into the Check. wall socket.

A fuse/circuit breaker has been Check. tripped.

33

Troubleshooting

Problem

Possible causes

Action

The dishes are not clean.

The spray arms do not rotate. Check that the dishes are not blocking the spray arms.

Spray arm holes or bearings blocked.

Clean the spray arms. See the chapter Care and cleaning.

Unsuitable dishwashing program.

Select a program with a high temperature to dissolve grease on very dirty dishes, such as Intensive.

Incorrect detergent dosage.

Dose according to water hardness. Far too much or far too little detergent results in poorer dishwashing results.

Old detergent. Detergent is a Avoid large packages. perishable product.

Dishes loaded incorrectly.

Do not cover porcelain with large bowls or the like. Avoid placing very tall glasses in the corners of the baskets. See the chapter Loading the dishwasher.

Glasses and cups have toppled Place dishes to sit steady. over during the program.

The filters are clogged.

Clean the coarse and fine filters.

The filters are not fitted correctly. Check that the filters are fitted correctly. See the chapter Care and cleaning.

Drainage pump stop missing.

Check that the yellow drainage pump stop (on the right in the bottom drain) is in place. See the chapter Care and cleaning.

Spots on stainless steel or silver. Some foodstuffs, such as

Rinse off these types of

mustard, mayonnaise, lemon, foodstuffs if not starting the

vinegar, salt and dressings, can dishwasher immediately. Use

cause spots on stainless steel if the Rinse and hold program.

left for too long.

All stainless steel can cause In order to avoid marks and

spots on silver if they come into tarnishing, separate dishes

contact during dishwashing. made from different metals,

Aluminium can also cause spots such as silver, stainless steel

on dishes.

and aluminium.

34

Troubleshooting

Problem Spots or films on the dishes.
The dishes have a sticky white/blue film. Spots left after washing. Detergent residue in the detergent compartment after dishwashing. Rattling sound when dishwashing.

Possible causes

Action

Incorrect rinse aid dosage setting.

See the chapter Settings.

The setting TAB is activated and Switch all-in-one detergents or

all-in-one detergent with

deactivate the setting TAB and

insufficient drying effect is being top up with salt and separate

used.

rinse aid. See Rinse aid in the

chapter Settings.

Salt compartment empty.

Top up with salt. See the chapter Care and cleaning.

Incorrect water softener setting. See Water hardness in the chapter Settings.

The water softener is leaking salt.

Check that the salt compartment lid is properly tightened. Otherwise contact your nearest service centre.

Too high temperature and/or too Wash crystal at a low

much detergent can cause

temperature and with a

etching on crystal.

conservative amount of

Unfortunately, this cannot be detergent. Contact the detergent

repaired, only prevented.

manufacturer.

Rinse aid dosage setting too high.

Reduce the dosage. See the chapter Settings. If you have very soft water, you may want to dilute the rinse aid 50:50 with water.

Lipstick and tea/coffee stains Use a detergent with a

can be difficult to remove.

bleaching agent.

The detergent compartment was The detergent compartment damp when adding detergent. must be dry when adding
detergent.

The detergent compartment has Check that the dishes are not

been blocked.

preventing the detergent

compartment from opening.

The dishes are not correctly Check that the dishes are

placed or the spray arms are not placed securely. Spin the spray

rotating.

arms to make sure they can

rotate.

35

Troubleshooting

Problem Water remains in the dishwasher.
Bad odour in dishwasher.
Grease deposits in the dishwasher.

Possible causes

Action

The filters are clogged.

Clean the coarse and fine filters.

The filters are not fitted correctly. Check that the filters are fitted correctly. See the chapter Care and cleaning.

Debris in the drainage pump. Clean the drainage pump. See the chapter Care and cleaning.

Drainage pump stop missing.

Check that the yellow drainage pump stop (on the right in the bottom drain) is in place. See the chapter Care and cleaning.

Kink in drainage hose.

Check that the hose is free from kinks and sharp bends.

Blocked drainage hose.

Disconnect the drainage hose where it connects to the sink unit’s water trap. Check that no debris has fastened and that the connection has an inner diameter of at least 14 mm.

Dirt around the seals and in corners.

Clean with washing-up brush and low foaming cleaner.

Low temperature programs have Run a program with a high

been selected for a prolonged temperature once or twice a

period.

month. Or run a self-cleaning

program. See Self-cleaning in

the chapter Using the

dishwasher.

Low temperature programs have Select a program with a high

been selected for a prolonged temperature to dissolve grease

period.

on very dirty dishes, such as

Intensive. Or run a self-cleaning

program once or twice a month.

See Self-cleaning in the chapter

Using the dishwasher.

36

Troubleshooting

Problem

Possible causes

Action

The dishes are not dry enough. The Auto door open option is not Activate the Auto door open

activated.

option.

The dishwasher is not fully loaded.

Fully load the dishwasher.

Rinse aid needs topping up or Top up with rinse aid or increase

dosage is set too low.

the rinse aid dosage setting.

The setting TAB is activated and Switch all-in-one detergents or

all-in-one detergent with

deactivate the setting TAB and

insufficient drying effect is being top up with salt and separate

used.

rinse aid. See Rinse aid in the

chapter Settings.

37

Installation

It is important that you read through and follow the instructions and directions below. Conduct installation and connection in accordance with the separate installation instructions. [mm]

*Remove the locking nuts when installing in a recess measuring 820-821 mm.

**Cover door length.

Nominal dimensions. Actual measurements may vary.

Safety instructions
· Connections to electricity, water and drainage must be performed by a qualified professional. · Always follow applicable regulations for water, drainage and electricity. · Take care during installation! Wear protective gloves! There must always be two people! · Place a drip tray on the floor beneath the dishwasher to prevent damage from any water leaks. · Before screwing the dishwasher into place, test the dishwasher by running the Rinse and hold
program. Check that the dishwasher fills with water and drains. Check also that none of the connections leak.
WARNING!
The ventilation opening in the lower part of the door must not be blocked by a rug, carpet or similar furnishing.
WARNING!
Turn off the water supply when installing the dishwasher! The plug must be disconnected or power to the socket turned off while the work is carried out!

38

Installation
Setup
· The recess and connection dimensions are included in the separate installation instructions. Check that all dimensions are correct before starting the installation. Note that the height of the cover door can be adjusted to match other fittings.
· Make sure the area on which the dishwasher is to be installed is firm. Adjust the adjustable feet so that the dishwasher is level. Tighten the lock nuts.
· If the dishwasher is built-in the surrounding furnishings must be resistant to any condensation from the dishwasher.
· Mount the protective film beneath the worktop and up around the edge. The function of the protective film is to protect the worktop from moisture. (The protective film is in the enclosed plastic bag.)
· Check that the machine is installed such that the door opens freely, otherwise door lock functionality may be disrupted.
· Note that the door springs may need adjusting after a cover door has been fitted. Adjust the left and right door springs equally until the door is evenly balanced.
Drainage connection
This dishwasher is suitable for installing in a raised recess (to attain an ergonomic working height). This means that the dishwasher can be placed so that the drainage hose runs to a lower level than the bottom of the dishwasher, such as by routing it directly to a floor drain.
The drainage hose can also be connected to a connection nipple on the sink unit’s water trap. The connection nipple must have an internal diameter of at least 14 mm.
The drainage hose may be extended by a maximum of 2.5 m (the total length of the drainage hose must not exceed 4.5 m). Any joints and connecting pipes must have an internal diameter of at least 14 mm.
No part of the drainage hose may be more than 950 mm above the bottom of the dishwasher.
Attach the drainage hose with a hose clamp. Ensure that the drainage hose has no kinks.
Connection to water supply
Use only the inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses.
The supply pipe must be fitted with a water tap (stopcock). The water tap must be easily accessible, so that the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, turn on the water tap and allow the pressure to settle for a while. Check that all connections are watertight.
Connect to cold water Connect the dishwasher to the cold water supply if the building is heated using oil, electricity or gas.
Connect to hot water Connect the dishwasher to the hot water supply (max. 70 °C) if the building is heated using an energy-efficient means such as district heating, solar power or geothermal power. Choosing a hot water connection reduces the dishwasher’s energy consumption.
NOTE!
Do not exceed the permitted water supply temperature. Certain materials used in some cookware cannot withstand high heat. See Fragile dishes in the chapter Loading the dishwasher.
39

Installation
Electrical connection
Information about the electrical connection can be found on the serial number plate. This specification must match the electricity supply. The dishwasher must be connected to an earthed socket. The electric wall socket must be placed outside of the installation area to be easily accessible after installing the dishwasher. Do not use an extension cord!
40

Service
Read the chapter Troubleshooting before contacting the service centre. If you have encountered a problem that you cannot resolve, please contact your nearest service centre for professional help, see www.atag.nl / www.atag.be. Our website also has information about spare part availability and what you can repair yourself. When making contact, provide the details on the serial number plate. Include the article number (1) and the serial number (2). Please note that non-professional repairs may risk user safety and affect the warranty.

1 2

Number of cycles

Press and hold

and for 3 seconds to show Number of cycles on the display.

41

Technical data and energy labelling

Technical data

Height: Width: Depth: Weight: Number of standard place settings: Water pressure: Electrical connection: Rated power:

1. Weight can vary due to different specifications.
2. In accordance with the EN 60436 standard.

819-872 mm 596 mm 554 mm 50 kg 1) 14 2) 0.03-1.0 MPa See the serial number plate See the serial number plate

Information for consumers
Information about your appliance can be found at www.atag.nl / www.atag.be. You can also find information in the EU Product Registration database for Energy Labelling, EPREL. Scan the QR code on the energy label supplied with the dishwasher (or go to https://eprel.ec.europa.eu and search for the model name).
This appliance contains a light source/light sources of energy efficiency class D. Light sources are available as spare parts and can be replaced, without damage to the dishwasher, by your nearest service centre or a similarly qualified professional.
Information for test institute
Information about this product can be found in the European Product Database for Energy Labelling, EPREL, and can also be ordered by e-mail dishwashers @appliance-development.com.
The request should include the details on the serial number plate. Include the article number (1), the serial number (2) and the model name (3).

1

3

2

Declaration of conformity
We hereby declare that this appliance is in conformity with the relevant European directives and the requirements of the relevant standards.

42

www.atag.nl · www.atag.be
917891-a1 We reserve the right to make changes.

References

• Premium keukenapparatuur | Nederlands Design | ATAG
• Premium keukenapparatuur | Nederlands Design | ATAG

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>