DOYOKY JC02-1 Epoch Game Controller User Guide

DOYOKY JC02-1 Epoch Game Controller

Product Information:

Model: JC02-1

Features: L3 D-Pad Motor Turbo, R ZR, SL LED 1-4, Paring SR, Charge lamp, Screenshot, Home +, Light Mapping, M2, M1, Charging port, L4, R4, Y X A B, R3, Motor Turbo
Compatibility: Works with Nintendo Switch
Specifications:

• Working voltage: DC 3.7-4.2V
• Input voltage/current: DC 5V/1A
• Charging time: about 2 hours
• Continuous running time: >8 hours
• Battery capacity: 600mAh

Product Usage Instructions

Connecting and Reconnecting:
To connect the controllers wirelessly:

1. Detach them from the Switch.
2. To reconnect, press the Home or Screenshot button. The LED indicators will flash.

Changing Colors and Modes :
To change colors:

1. Press the Light button once to cycle through colors.
2. Double press the Light button to switch between light modes.
3. Brightness adjustment can be done by holding the Light button for 1 second.
4. To turn off lights, double press the Light button in Rainbow Mode.

Setting Buttons and Turbo Function:
To set buttons and turbo function:

1. Hold the Turbo button and press the desired button to set or cancel turbo function.
2. To cancel turbo function of all buttons, hold Turbo for 4 seconds.

Programming Mode :
To enter programming mode:

1. Hold the M button and press any M1/M2/L4/R4 button to enter.
2. Input desired button or combination.
3. To exit without setting buttons, press the same M1/M2/L4/R4 button.
4. To reset assigned function, press M button for 5 seconds.

Power Management :
To manage power:

1. To wake up the controller, press the Home button after initial connection.
2. To power off, hold the Pairing button for 0.5 seconds.
3. Low battery warning indicated by LED1-4 flashing quickly simultaneously.

Frequently Asked Questions (FAQ):

• Q: How do I know if the controllers are connected wirelessly?
  A: The LED indicators on the side will start flashing in a regular pattern when connected wirelessly.

• Q: How long does it take to charge the controller fully?
  A: It takes about 2 hours to fully charge the controller.

• Q: Can I customize button settings on this controller?
  A: Yes, you can set buttons and their functions using the programming mode as described in the manual.

Welcome Guide

Layout

Wired Pairing

1. Please make sure that the Switch has turned on the wired connection mode. (Setting – Controllers and Sensors – Pro Controller Wired Communication)
2. Attaching the controllers to the Switch will connect them automatically.

Wireless Pairing
The controllers will remain paired when you detach them from the Switch, and you’ll be able to use them wirelessly.

Reconnection

Press the Home button or the Screenshot button to reconnect the Switch, The LED1-4 indicators on the side will start to flash in a regular pattern as an indication of reconnecting.

Light

• Change Colors
• Press the Light button once to change the color successively.(Controller will vibrate)
• Colors: pink – red – orange – green – blue – cyan

Change Modes

• Double press the Light button to switch light modes.
• (Controller will vibrate)
• Mode 1: Single Color
• Mode 2: Automatic Single Color
• Mode 3: Rainbow
• Mode 4: Lights Off
• Brightness Adjustment
  • Press and hold the Light button for 1s to start adjusting the brightness: 40%-70%-100% (Controller will vibrate)
• Lights Off
  • After switching the lights to Rainbow Mode, double press the light button to turn off the lights.

Turbo T

• Buttons can be set
• A / B / X / Y / L / ZL /R / ZR / D-Pad / M1/ M2 / L4 / R4.
• Setting
• Hold the Turbo button and press the button that you want to set to  turn on the turbo function. (Controller will vibrate)
• Cancel
• Method A: Hold the Turbo button and press the button that you have set to turn off its turbo function. (Controller will vibrate)
• Method B: Hold the Turbo button for 4s to cancel the Turbo function of all buttons.(Controller will vibrate)

Vibration Adjustment

• Press the Motor button once to change the vibration of controller successively.(Controller will vibrate)
• Levels of vibration intensity: 0%，50%, 100%.

Mapping M + M1 | M2|L4|R4

Buttons can be set
A / B / X / Y /R / ZR / L / ZL / L3 / R3 / D-Pad and left or right joysticks (joystick counts as eight keys).
Setting

1. Hold the M button and press any of M1/M2/L4/R4 button to enter the programming mode.

2. Then input the button or button combination you want to set.
   Each programmed button(M1/M2/L4/R4 can record up to 16 inputs
   (Each press of function buttons is regarded as an input)， When the input exceeds 16 times，the programming will automatically end.

3. When you’re done , press the M1/M2/L4/R4 button that was pressed earlier to end the programming.
   Note : The controller will vibrate when you start or end the programming.

4. Cancel
   Method A: After entering the programming mode, directly press the
   M1/M2/L4/R4 button that was pressed earlier to exit without setting any
   buttons.(at this time，M1/M2/L4/R4 button is empty and there is no function)
   Method B: Press the M button for 5s to reset the assign function.
   Note : The controller will vibrate when you cancel the programming.

Specifications

• Working voltage: DC3.7-4.2V
• Input voltage/current: DC5V/1A
• Charging time: about 2 hours
• Continuous running time: >8
• hours Battery capacity: 600mAh

Status

• Wake Up
  After the first successful connection, press the Home button to wake up the switch and reconnect (other buttons can not wake up).

• Power Off
  To power off the controller, press and hold the Pairing button for 0.5s.

• Low Battery
  When the battery power is low, the LED1-4 indicators lights flash quickly at the same time.

• Charge

• Charging: The LED1-4 indicators lights slowly and Charge lamp will turn red.

• Full: The LED1-4 indicators lights off and Charge lamp will turn green.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-tion.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

doyokygame
Website: www.doyoky.com
Customer: service@doyoky.com Business: contact@doyoky.com
DOYOKY Game

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>