BESTTEN USP-DS07N Super Slim Dimmer Switch For LED User Manual

: June 17, 2024
: Bestten

Table of Contents

BESTTEN USP-DS07N Super Slim Dimmer Switch For LED
USER MANUAL
WARNINGS AND CAUTIONS
SPECIFICATIONS
BULB COMPATIBILITY
INSTALLATION INSTRUCTIONS
TROUBLESHOOTING
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BESTTEN USP-DS07N Super Slim Dimmer Switch For LED

BESTTEN-USP-DS07N-Super-Slim-Dimmer-Switch-For-LED-
PRODUCT

Specifications

Voltage: 120VAC 60Hz
Maximum Wattage: Dimmable LED/CFL 300W

Bulb Compatibility

The BESTTEN DS07N Dimmer is compatible with most Dimmable LED,
Dimmable CFL, and Incandescent Bulbs or 120V Halogen Fixtures. It is recommended to use only high-quality Dimmable LED, Dimmable CFL, or Incandescent Bulbs.
Although the BESTTEN DS07N Dimmer has one of the widest ranges of compatibility with dimmable LED, CFL, and Incandescent lights on the market, there are a small number of lights sold that are incompatible with this dimmer. These lights are usually of low quality. Major brands from popular big box stores have proven to have the most reliable compatibility.

USER MANUAL

Super Slim Dimmer Switch for LED / Compact Fluorescent / Incandescent
Single Pole / 3-Way Applications

Model Number: USP-DS07N

WARNINGS AND CAUTIONS

Use only with compatible Dimmable LED / Dimmable CFL / Incandescent Bulbs or 120V Halogen Fixtures.
Use only ONE dimmer per 3-way circuit.
DO NOT MIX BULB, TYPES, BRANDS, OR MODELS when multiple bulbs are used.
DO NOT use dimmer to control a receptacle, fan, or other motor operated appliance, transformer-supplied appliance, or any lighting fixtures other than those specified.
To be installed and/or used in accordance with all applicable electrical codes and regulations.
No neutral wire required.
If you are unsure about any part of these instructions, please consult a qualified electrician.

SPECIFICATIONS

Voltage …………………………………………………………………….. 120VAC 60Hz
Maximum Wattage ……………………………………. Dimmable LED/CFL 300W
Incandescent/Halogen 600W
Switch Type ………………………………………………….. Single Pole and 3-Way
Operation Temperature Range …………………….. 32°F (0°C) – 104°F (40°C)
Certifications …………………………………………………………. ETL/cETL Listed

BULB COMPATIBILITY

BESTTEN DS07N Dimmer is compatible with most Dimmable LED, Dimmable CFL and Incandescent Bulbs or 120V Halogen Fixtures.
USE ONLY HIGH QUALITY Dimmable LED, Dimmable CFL, or Incandescent Bulbs.
Although the BESTTEN DS07N Dimmer has one of the widest ranges of compatibility with dimmable LED, CFL, and Incandescent lights on the market, there are a small number of lights sold that are incompatible with this dimmer. These are usually of low quality.
Major brands from the most popular big box stores have proven to have the most reliable compatibility.

INSTALLATION INSTRUCTIONS

STEP 1
Turn off power at breaker or fuse, ensuring power is off at the wall box before starting work.
Identify Your Wiring Application (Most Common)
NOTE: If the wiring in the wall box does not resemble any of these configurations, please consult an electrician.
Line (Hot)
Ground
Load
Way
Line or Load Common (See important instructions below)
Ground
First Traveler
Second Traveler
IMPORTANT FOR 3-WAY APPLICATIONS
REPLACE ONLY ONE 3-WAY SWITCH AT A TIME, test after each installation.
When replacing an old switch or dimmer in a 3 way application, it is important that the Common (Line or Load) and Traveler wires must be identified and tagged BEFORE the old switch or dimmer is removed.
Taking a picture of how the wires are connected to your old switch or dimmer before it is removed can aid in identifying these wires during the installation of the new dimmer.
On your old 3-way switch or dimmer one of the terminal screws will usually be a different color than the other two terminal screws or labeled C or Common. Tag the wire connected to this terminal as Common (Line or Load). The wires connected to the two other terminals will be the traveler wires and should be tagged as Traveler. If there are wires instead of terminals, as is common on dimmers, there will often be a black and two other colored wires, usually red or red and brown (Green is Ground). Tag the wire connected to the black
wire on the old dimmer as Common (Line or Load). The other two wires can be tagged as Traveler.
STEP 3A Single Pole Wiring Application

This wire is used in 3-way installations only. For single pole installations cover with wire nut.
- Black wire on the dimmer connects to the Line or Hot Wire (Live wire coming from the breaker or fuse panel).
- Red Wire on the dimmer connects to the Load wire (The wire that goes to the light).
- Green wire on the dimmer connects to ground. This is usually a bare copper or green wire in the wall box.
- The Red and White wire is not used in a single pole application. Insulate this wire with a wire nut.
- No neutral wire required, suits houses of all ages.
  With each connection twist the wires together and secure with a wire nut. Check to ensure each connection is tight and secure and there are no bare wire visible.
  
  IMPORTANT: In a 3-way circuit, only one dimmer can be used
- Black wire on the dimmer connects to the Common (Line or Load) Wire.
- The Red, and Red and White wires on the dimmer connect to the Traveler wires. These two wires are interchangeable in this application.
- Green wire on the dimmer connects to ground. This is usually a bare copper or green wire in the wall box.
- No neutral wire required, suits houses of all ages.
  With each connection twist the wires together and secure with a wire nut. Check to ensure each connection is tight and secure and there are no bare wire visible.
STEP 4 Mounting Dimmer
Carefully position the wires in the wall box to make room for the dimmer. BESTTEN DS07N dimmers are of a slim design to make this step easier. Using the provided mounting screws, secure the dimmer to the wall box.
STEP 5
Test Dimmer
Turn on power at the breaker or fuse panel.
- With the dimmer slide in the brightest (all the way up) position check the ON/OFF function of the rocker switch.
- Check the function of the dimmer by slowly moving the dimmer slide back and forth, noting how the lights dim.
- If you are satisfied with the operation of the dimmer. Finish the dimmer installation by installing a wall plate.
- If lights experience any of the following, proceed to STEP 6
- Lights flicker at low settings.
- Lights do not come on until dimmer is at high setting.
- Lights turn off when being dimmed.
- Lights do not turn on at the lowest setting.
- Lights are too bright at lowest setting.
STEP 6 Adjust Dimming Range
To adjust the dimming range you can rotate the Adjustment Wheel to raise or lower the minimum brightness of your lights. The Adjustment wheel can also be used to eliminate flickering at the lowest setting.
- Turn ON the rocker switch and move the dimmer slide to the lowest
  (all the way down) position.
- Rotate the Adjustment Wheel clockwise all the way down to the highest position.
  NOTE: If the wheel stops in either direction, do not continue to rotate it.
- Rotate the Adjustment Wheel counter-clockwise up slowly until the lowest desired light level is achieved and the lights are not flickering.
- With the dimmer slide in the lowest (all the way down) position, check to make sure the lights turn on and do not flicker. If not, rotate the Adjustment Wheel clockwise slightly and check again.
- Once you are satisfied with the operation of the dimmer. Finish the dimmer installation by installing a wall plate.

TROUBLESHOOTING

Please carefully read any troubleshooting steps that apply.

Problem 1 Lights flicker at low settings
Refer to STEP 6 Rotate Adjustment wheel to raise starting voltage to eliminate flickering at low settings.
Problem 2
Lights flicker at all settings
Ensure all lights are marked as the dimmable type, are the same brand and model and wattage.
Change brand or model of bulb ensuring they are dimmable to check compatibility.
Ensure only one dimmer is installed in a 3-way circuit.
Ensure the maximum wattage is not exceeded for type of light (300W for LED and CFL.600W for Incandescent).
Ensure all electrical connections are secure on both dimmer and lights.
Problem 3
- Lights turn off when being dimmed
- Lights do not come on until dimmer is at high setting
1. Refer to STEP 6 Rotate Adjustment Wheel to raise starting voltage to ensure lights turn on at lowest setting.
2. Ensure all lights are marked as the dimmable type, are the same brand and model and wattage.
3. Change brand or model of bulb ensuring they are dimmable to check compatibility.
Problem 4 Bulbs dim at different rates or act differently at settings Ensure all lights are of the same brand, wattage and model. It helps if all bulbs are even from the same batch as variances in light manufacturing can cause bulbs to act differently at lowest setting levels.
Problem 5 Dimmer is not working in 3-way position
Ensure only one dimmer is installed in a 3 way circuit.
Refer to Diagram in STEP 3B. Check all wiring of dimmer and 3-way switch ensuring Line, Load and traveler wires have all been identified and connected correctly, to both the dimmer and the switch. There is no standard for wire color in a 3 way circuit, consult an electrician if help is needed to identify the wires.
Problem 6 Audible buzzing or humming from dimmer
Ensure only one dimmer is installed in a 3 way circuit. Ensure all lights are marked as the dimmable type, are the same brand, wattage and model or change brand of bulb.
Ensure the maximum wattage is not exceeded for type of light (300W for LED and CFL.600W for Incandescent).
Problem 7
Lights are too bright at lowest setting
Refer to STEP 6 Rotate Adjustment Wheel to lower starting voltage to ensure lights are adequately dimmed at lowest setting.
Ensure all lights are marked as the dimmable type, are the same brand
and model or change brand or model of bulb.

If all troubleshooting steps have been carefully followed and the problem continues, please contact a qualified electrician or customer support for more information.

WARRANTY

BESTTEN warrants to the original customer that this product is free of defects in materials and workmanship for one year from the purchase date. Within this period, simply contact BESTTEN CARE with proof of purchase and reason of claim. We will replace the product for free.
Any product which is subject to misuse or accidental damage is excluded from this warranty.