little tikes 638961M8 Adventure Rover TM Instruction Manual

June 17, 2024
Little Tikes

Little Tikes 638961M8 Adventure Rover TM

little-tikes-638961M8-Adventure-Rover-TM-PRODUCT

Specifications

  • Product model : XIM638961-R1
  • Recommended age : 11/2-5 years
  • Assembly time : 50 min

Product Information

The Adventure RoverTM is a fun and exciting toy designed for children aged 11/2-5 years. It requires adult assembly and comes with a set of instructions to guide you through the process. The toy is made of plastic materials which may become brittle and crack upon impact, so it is important to store the product in a warmer, protected place. When disposing of the equipment, make sure to disassemble it in a way that eliminates any hazardous conditions such as small parts and sharp edges.

The Adventure RoverTM is powered by batteries, and it is recommended to use alkaline batteries for optimal performance and longer playtime. Make sure to follow both the toy and battery manufacturer’s installation instructions for proper setup. Avoid mixing old and new batteries, as well as different types or brands of batteries. Only use batteries of the same or equivalent type a recommended.

If the toy is not going to be used for an extended period of time, it is advised to remove the batteries to prevent possible leakage and damage to the unit. Dead or exhausted batteries should also be removed from the product and disposed of properly, following designated recycling facilities. If the unit stops working or doesn’t function correctly, try removing the batteries for a few minutes and then reinserting them. If the problem persists, install new batteries.

Assembly Instructions

Before starting the assembly process, make sure you have all the necessary parts listed in the manual. Some packages of hardware may have extra pieces. If you have any questions or need assistance, you can contact the Little Tikes customer service team at 1-800-321-0183.

Tools required (not included):

  • Top hat tool
  • AA batteries (6)

Hardware pack (included):

  • BB Washer (6)
  • CC Bushing (6)
  • Short plastic fastener (9)
  • Large fastener (4)

Assembly Steps:

  1. Remove and set aside the top hat tool. You will need it for assembly.
  2. Attach the front wheel axles, ensuring the correct placement of the left and right axles.
  3. Attach the door latches to the body of the Adventure RoverTM.
  4. Attach the doors to the body.
  5. Place the roof pillars – front and rear – onto the body.
  6. Attach the roof to complete the assembly.
  7. Install the steering wheel using the provided steering O ring.

FAQ

  • Q: What type of batteries should I use for the Adventure RoverTM?
    • A: It is recommended to use alkaline batteries for optimal performance and longer playtime.
  • Q: How do I dispose of dead batteries?
    • A: Dead batteries should be disposed of properly, following designated recycling facilities. Do not bury them or dispose of them in fire as they may leak or explode.
  • Q: What should I do if the Adventure RoverTM stops working?
    • A: Try removing the batteries for a few minutes and then reinserting them. If the problem persists, install new batteries.
  • Q: Where can I find customer service contact information?
    • A: For customer service inquiries, please refer to the contact information provided in the manual.

Thank you for choosing the Little Tikes© Adventure Rover™. We strive to provide a durable, easy-to-assemble toy that’s made to last, giving your child years of imaginative, engaging fun!

Really important information you should know!

  • Read through all the instructions first.
  • Clear a flat surface to lay out all the materials so everything is close at hand.
  • You will need a Phillips head screwdriver (power driver, recommended, not included) hammer and safety glasses (not included) to assemble the Adventure Rover™.
  • When installing screws, be sure screws are tightened snugly, but do NOT OVERTIGHTEN.
  • Be sure to locate your decals and set aside. Decals are easier to apply when the part is lying flat, so you may want to apply the decals before assembly.
  • The parts are listed below – each part is identified with a letter in RED for easy reference.
  • Illustrations are for reference only. Styles may vary from actual contents.
  • If you have any questions, we’re here to help. Give our customer service team a call at 1-800- 321-0183.

WARNINGS!

  • Adult Assembly Required
  • Keep these instructions for future reference.
  • Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp edges and sharp points. Keep away from children until assembled.
  • Ride-on toys should not be used near swimming pools, on or near steps, hills, roadways, or inclines.
  • Shoes must be worn at all times.
  • Only one rider at a time.
  • Maximum weight limit: 50 lbs. (23 kg)
  • This product is intended for use by children ages over 1 1/2 – 5 years.
  • Adult supervision is required. Do not leave children unattended.
  • This product is intended for outdoor domestic family use only.
  • Protect your eyes. Always wear safety glasses when using a hammer.
  • When temperatures fall below 0°F/-18°C, outdoor use of this product is not recommended. In extreme cold, plastic materials lose resilience and may become brittle and crack upon impact. Store product in a warmer, protected place.

DISPOSAL
Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not limited to, small parts and sharp edges exist at the time equipment is discarded.

WARNINGS!

  • This product contains a Button or Coin Cell Battery. A swallowed Button or Coin Cell Battery can cause  internal chemical burns in as little as two hours and lead to death. Dispose of used batteries immediately.Keep new and used batteries away from children. If you think batteries might have been swallowed orplaced inside any part of the body, seek immediate medical attention.

BATTERY SAFETY INFORMATION

  • Keep these instructions for future reference.

  • Replace with 2 “LR44” button cell batteries (not included).

  • The voltage of a fully-charged, rechargeable battery is often lower than that of a fresh alkaline battery.
    Therefore, it is recommended that alkaline batteries be used instead of rechargeable batteries for best performance and longer play time.

  • Install batteries with the correct polarity (+ and -).

To avoid battery leakage:

  1. Follow the toy and battery manufacturer’s installation instructions.
  2. Do not mix old and new batteries.
  3. Do not mix standard (carbon-zinc), alkaline or rechargeable batteries. Do not mix different brands of batteries. Only batteries of the same or equivalent type as recommended are to be used.
  4. When toy is not used for an extended period of time, remove batteries to prevent possible leakage and damage to the unit.
  5. Remove dead or exhausted batteries from product.
  6. Dispose of dead batteries properly; do not bury. Do not dispose of batteries in fire as they may leak or explode.
  • Make sure cover is properly installed on unit at all times.
  • Do not attempt to recharge non-rechargeable batteries.
  • Rechargeable batteries are to be removed from the toy before recharging.
  • Charging of rechargeable batteries should be done only by an adult.
  • The supply terminals are not to be short circuited.
    • NOTE : If the unit stops working or doesn’t work as it should, remove the batteries for a few minutes and then reinsert them. If there is still a problem, install new batteries.

FCC COMPLIANCE

  • *  **NOTE** : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  

    provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
    not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
    will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
    equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and the receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help.
    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

    • Caution : Modifications not authorized by the manufacturer may void user authority to operate this device. This Class B digital apparatus complies with Canadian ICES-003.

Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item. Do not treat old batteries as household waste. Take them to a designated recycling facility.

The Little Tikes Company, an MGA Entertainment company. LITTLE TIKES® is a trademark of Little Tikes in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of Little Tikes. Please keep this address and packaging for reference since it contains important information. Contents, including specifications and colors, may vary from photos depicted on the package. Instructions included. Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.

LIMITED WARRANTY

The Little Tikes Company makes fun, high-quality toys. We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year from the date of purchase (a dated sales receipt is required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under this warranty will be the replacement of the defective part or the replacement of the product. This warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material and workmanship. The warranty period is three (3) months for daycare or commercial purchasers.

U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183, or write to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson
OH 44236, U.S.A. Some replacement parts may be available for purchase after the warranty expires—contact us for details.

Outside U.S.A. and Canada: Contact the place of purchase for warranty service. This warranty gives you specific legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

A Few Things Before You Start!

Before you begin assembly, make sure you have all the parts listed below.
Some packages of hardware may have extra pieces.
Questions? We’re here to help. Little Tikes customer service team at 1-800- 321-0183.

TOOLS

  • Hardware Guide

little-tikes-638961M8-Adventure-Rover-TM-FIG2

little-tikes-638961M8-Adventure-Rover-TM-FIG3

INSTALLATION INSTRUCTIONS

little-tikes-638961M8-Adventure-Rover-TM-FIG4 little-tikes-638961M8-Adventure-Rover-TM-FIG5 little-tikes-638961M8-Adventure-Rover-TM-FIG6 little-tikes-638961M8-Adventure-Rover-TM-FIG7 little-tikes-638961M8-Adventure-Rover-TM-FIG8 little-tikes-638961M8-Adventure-Rover-TM-FIG9 little-tikes-638961M8-Adventure-Rover-TM-FIG10 little-tikes-638961M8-Adventure-Rover-TM-FIG11 little-tikes-638961M8-Adventure-Rover-TM-FIG12 little-tikes-638961M8-Adventure-Rover-TM-FIG13 little-tikes-638961M8-Adventure-Rover-TM-FIG13 little-tikes-638961M8-Adventure-Rover-TM-FIG15 little-tikes-638961M8-Adventure-Rover-TM-FIG16 little-tikes-638961M8-Adventure-Rover-TM-FIG17

CUSTOMER SERVICE

  • United States:
  • www.littletikes.com
  • 1-800-321-0183 Monday – Friday
  • The Little Tikes Company
  • 2180 Barlow Road, Hudson, OH 44236
  • Printed in U.S.A. D.R.©2023 The Little Tikes Company

United Kingdom:

Australia

little-tikes-638961M8-Adventure-Rover-TM-FIG1

Adult assembly is required. Approx. assembly time: 50 min.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals