Rockford Fosgate RFKHDRKM5 1998 Harley Davidson Road King User Manual

Rockford Fosgate RFKHDRKM5 1998 Harley Davidson Road King

Product Information

Specifications

• Maximum Mobile Device Volume: 95%
• Front Input Level: 03:00 O’Clock
• Rear Input Level: 03:00 O’Clock
• Preset: OFF
• Punch EQ: MIN
• Crossover: HP (High-Pass)
• Crossover Frequency: 80Hz
• Input: 2CH (L/R Input)

Product Usage Instructions

Amplifier Tuning

1. Before installing the amplifier, remove the cover and set the PRESET to the OFF position.
2. Verify that the remaining settings are properly configured.
3. Replace the cover for water-tight protection.

Bluetooth Pairing

Once the installation is complete, follow these steps to pair your mobile device with the Bluetooth module:

1. Turn the motorcycle ignition to ACCESSORY.
2. PRESS & HOLD the Bluetooth button for 2 seconds.
3. The DISCOVER mode will begin when the module audibly chimes and the 2 outer LEDs begin to alternately flash.
4. PAIR your mobile device using one of the following methods:

iOS:

1. Go to SETTINGS > BLUETOOTH.
2. Select RFBTRCA.
3. Pairing is confirmed with an audible chime and all 3 LEDs will illuminate.

Android:

1. Go to SETTINGS > CONNECTED DEVICES > BLUETOOTH.
2. Select PAIR NEW DEVICE.
3. Select RFBTRCA.
4. Choose ALLOW TO PAIR.
5. Once pairing is complete, you will hear an audible chime and all 3 LEDs will illuminate.

FAQ

Q: What is the recommended maximum volume for the mobile device?

A: The recommended maximum volume for the mobile device is 95% or below to ensure optimum sound quality and prevent speaker damage.

Q: How should I adjust the input level for the lower speakers?

A: For 4 lower speakers, retain the front input level at the 3:00 o’clock setting. For 2 lower speakers, reduce the front input level until the sound is balanced with the rear saddlebag speakers.

M5-800X4 Tuning Guide

Maximum Mobile Device Volume: 95%
For optimum sound quality and prevent speaker damage, keep volume setting at 95% or below.

AMPLIFIER TUNING

Before installing amplifier, remove cover and set PRESET to OFF position. Verify remaining settings are properly configured. Replace cover for water- tight protection.

BLUETOOTH PAIRING

Once installation is complete, reduce volume on your mobile device and follow the steps below to pair your device with the Bluetooth module. Subsequent pairing will be automatic.

1. Turn motorcycle ignition to ACCESSORY.
2. PRESS & HOLD Bluetooth button for 2 seconds.
3. DISCOVER mode will begin when module audibly chimes and 2 outer LEDs begin to alternately flash.
4. PAIR mobile device using one of the following methods: iOS:
5. Go to SETTINGS > BLUETOOTH.
6. Select RFBTRCA.
7. Pairing is confirmed with an audible chime and all 3 LEDs will illuminate.

ANDROID:

1. Go to SETTINGS > CONNECTED DEVICES > BLUE-TOOTH.
2. Select PAIR NEW DEVICE.
3. Select RFBTRCA.
4. Choose ALLOW TO PAIR.
5. Once pairing is complete you will hear an audible chime and all 3 LEDs will illuminate.

OPTIONAL FRONT LOWER OUTPUTS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>