ADJ Mini Dekker DMX-512 RGBW LED Instruction Manual

: June 17, 2024
: ADJ

Table of Contents

ADJ Mini Dekker DMX-512 RGBW LED
Specifications
Introduction
General Instructions
Features
Warranty Registration
Safety Precautions
Set-Up
Mini Dekker
Operating Instructions
Fuse Replacement
Trouble Shooting
Cleaning
Warranty
Technical Specifications
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ADJ Mini Dekker DMX-512 RGBW LED

Specifications

Model: Mini Dekker
Manufacturer: ADJ Products, LLC
Operating Hours: Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time
Voice: 800-322-6337
Fax: 323-582-2941
Email: support@americandj.com
Website : www.adj.com

Introduction

The Mini Dekker is a lighting fixture designed to provide optimized performance for various applications. It is important to read and understand the operating instructions to ensure safe and proper use of the unit.

Unpacking: Thank you for purchasing the Mini Dekker by ADJ Products, LLC. Every Mini Dekker has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit have arrived intact. In the case, that damage has been found or parts are missing, please contact our toll-free customer support number for further instructions. Do not return this unit to your dealer without first contacting customer support.

Introduction: The Mini Dekker is part of ADJ’s continuing pursuit of creating high quality affordable intelligent fixtures. The Mini Dekker is a DMX intelligent LED moonflower effect. This fixture can be used in a stand- alone mode or connected in a Master/Slave configuration. The unit can also be controlled via a DMX controller. This wash has three operating modes: Sound Active mode, Show mode, and DMX control.

Customer Support:

ADJ Products, LLC provides a toll-free customer support line, to provide setup help and to answer any questions should you encounter problems during your setup or initial operation. You may also visit us on the web at www.adj.com for any comments or suggestions.
Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacific Standard Time.
- Voice: 800-322-6337
- Fax: 323-582-2941
- E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Caution! There are no user-serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will void your manufacturer warranty. In the unlikely event your unit may require service please contact ADJ.
PLEASE recycle the shipping carton whenever possible.

General Instructions

To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference.

Features

Includes Hanging Yoke
3 Operating Modes: Show Mode, Sound Active, & DMX Control
Light Weight
Strobing
Electronic Dimming 0-100%
Built-in Microphone
DMX-512 protocol
9 DMX Channels

Warranty Registration

The Mini Dekker carries a 1 Year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items whether under warranty or not, must be freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be written on the outside of the return package. A brief description of the problem as well as the R.A. number must also be written down on a piece of paper and included in the ship- ping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain an R.A. number by contacting customer support at 800-322-6337.

ADJ Products, LLC – www.adj.com – Mini Dekker Instruction Manual Page 3

Safety Precautions

To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture
Do not spill water or other liquids into or onto your unit.
Be sure that the local power outlet matches that of the required voltage for your unit.
Do not attempt to operate this unit if the power cord has been frayed or broken. Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce the risk of electrical shock and fire in case of an internal shortage.
Disconnect from the main power before making any type of connection.
Do not remove the cover under any conditions. There are no user-serviceable parts inside.
Never operate this unit when its cover is removed.
Never plug this unit into a dimmer pack
Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
This unit is intended for indoor use only, use of this product outdoors voids all warranties.
During long periods of non-use, disconnect the unit’s main power.
Always mount this unit safely and stably.
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the point they exit from the unit.
Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 11 for cleaning details.
Heat -The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
- A. The power supply cord or the plug has been damaged.
- B. Objects have fallen, or liquid has been spilled into the appliance.
- C. The appliance has been exposed to rain or water.
- D. The appliance does not appear to operate normally or exhibit a marked change in performance.

Set-Up

Power Supply: The ADJ Mini Dekker contains an automatic voltage switch, which will auto-sense the voltage when it is plugged into the power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere.
DMX-512 : DMX is short for Digital Multiplex. This is a universal protocol used as a form of communication between intelligent fixtures and controllers. A DMX controller sends DMX data instructions from the controller to the fixture. DMX data is sent as serial data that travels from fixture to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only have a DATA “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of different manufacturers to be linked together and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that unit, no matter where it is located in the DMX chain.
Data Cable (DMX Cable) Requirements (For DMX Operation): The Mini Dekker is a 9-channel DMX unit. The DMX address is set electronically using the controls on the rear panel of the unit. Your unit and your DMX controller require an approved DMX-512 110 Ohm Data cable for data input and data output. We recommend Accu-Cable DMX cables. If you are making your cables, be sure to use standard 110-120 Ohm shielded cable (This cable may be purchased at almost all professional sound and lighting stores). Your cables should be made with a male and female XLR connector on either end of the cable. Also, remember that DMX cable must be daisy-chained and cannot be split.

Mini Dekker

Notice : Be sure to follow figures two and three when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic behavior.

Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator on the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number Z-DMX/T) will decrease the possibility of erratic behavior.

5-Pin XLR DMX Connectors. Some manufacturers use 5-pin DMX-512 data cables for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pin data cables into a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The chart below details a proper cable conversion.

Operating Instructions

LCD DISPLAY LOCK
The display will lock after 30 seconds. Press and hold the MENU button for at least 10 seconds to unlock the display and access the menu.

ADDR – DMX Address Setting.

Press either the MENU button until “ADDR” is displayed, or press ENTER.
The current DMX address will now be displayed. Press the UP or DOWN buttons to find your desired address. Press ENTER to set your desired DMX address.

SHOW – Show mode.

Press the MENU button until “Show” is displayed, and press ENTER to activate.

SOUN – Sound Active mode with adjustable sound sensitivity.

Press the MENU button until “Soun” is displayed, and press ENTER.
Use the UP or DOWN buttons to either turn sound activity “On” or “Off”, and press ENTER.
Use the sound sensitivity knob on the back to adjust the sound sensitivity.

VER – Use this function to display the Software version of the unit.

Press either the MENU button until “VER” is displayed, or press ENTER.
The display will show the software version.

Universal DMX Control: This function allows you to use a universal DMX-512 controller to control the patterns, rotation, and strobing. A DMX controller allows you to create unique programs tailored to your individual needs.

The Mini Dekker is a 9 DMX channel DMX fixture. See page 10 for a detailed description of the DMX values and traits.
To control your fixture in DMX mode, follow the set-up procedures on pages 5-6 as well as the set-up specifications that are included with your DMX controller.
Follow the instructions on page 7 to set the DMX address.
For longer cable runs (more than 100 feet) use a terminator on the last fixture.
For help operating in DMX mode consult the manual included with your DMX controller.

Sound Active Mode : This mode allows a single unit or several units linked together, to run to the beat of the music.

Press the MENU button until “Soun” is displayed, and press ENTER.
Press the UP or DOWN buttons to either activate sound active mode or deactivate, and press ENTER. The unit will now run to the beat of the music.
The sound sensitivity can be adjusted by turning the sound sensi- tivigy knob located on the back of the unit. Turning the knob clockwise is the most sensitive and turning it counter-clockwise is the least sensitive.

Show Mode : This mode allows a single unit or several units linked together, to run to a built-in program.

Press the MENU button until “Show” is displayed, and press ENTER to activate.

Master-Slave Operation: This function will allow you to link up to 16 units together and operate without a controller. In a Master-Slave set-up one unit will act as the controlling unit and the others will react to the controlling units programs. Any unit can act as a Master or as a Slave.

Using standard XLR microphone cables, daisy chain your units together via the XLR connector on the rear of the units. Remem- ber the Male XLR connector is the input and the Female XLR connector is the output. The first unit in the chain (master) will use the female XLR connector only – The last unit in the chain will use the male XLR connector only. For longer cable runs we suggest a terminator at the last fixture.
Set the Master to your desired operating mode.
Set the Slave unit(s) to address “001”.
The slave unit(s) will now follow the Master unit.

DMX Values & Traits

NOTE: To control using DMX, Channel 9 must be between the values of 0-9.

Fuse Replacement

Disconnect the unit from its power source. Remove the power cord from the unit. Once the cord has been removed, you will find that the fuse holder is located inside the power socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder. Remove the bad fuse and replace with a new one. The fuse holder also has a holder for a spare fuse.

Trouble Shooting

Trouble Shooting: Listed below are a few common problems that you may encounter, with solutions.
No light output from the unit;

Be sure the fuse has not blown. The fuse is located on the rear panel.

Unit does not respond to sound;

Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone, quiet or high-pitched sounds may not activate the unit.

Cleaning

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning of the internal and external optical lenses must be carried out periodically to optimize light output.

Use normal glass cleaner and a soft cloth to wipe down the outside casing.
Use a brush to wipe down the fan grill.
Clean the external optics with glass cleaner and a soft cloth every 20 days.
Clean the internal optics with glass cleaner and a soft cloth every 30-60 days.
Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend cleaning monthly. Periodic cleaning will ensure longevity and crisp output.

Warranty

MANUFACTURER’S LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a designated point within the United States. If the entire instrument is sent, it must be shipped in its original package. No accessories should be shipped with the product. If any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because not properly maintained as outlined in the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning or periodic check-ups. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or refurbished parts and will absorb all expenses for warranty service and repair labor because of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect.
E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without any obligation to include these changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made to any accessory supplied with the products described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the warranty period set forth above. And no warranties, whether expressed or implied, including warranties of merchantability or fitness, shall apply to this product after said period has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS

Lighting Products = 1-year (365 days) Limited Warranty (Such as Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, etc. excluding LED and lamps)
Laser Products = 1 Year (365 Days) Limited Warranty (excluding laser diodes which have a 6-month limited warranty)
L.E.D. Products = 2-year (730 days) Limited Warranty (excluding motors, PCB boards, and power supplies, which have a 1-year (365-day Limited Warranty) batteries which have a 180-day limited warranty). Only the L.E.D.s carry a 2-year warranty (excluding StarTec Series which carries a 1 Year Limited Warranty)
ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty (excluding faders and tact switches) ADJ Products, LLC – www.adj.com – Mini Dekker Instruction Manual Page 12

Technical Specifications

Model: Mini Dekker
LEDs: 2 x 10W RGBW LEDs
Voltage: 100~240v 50Hz~60Hz
Power Consumption : 25W
Beam Angle: 1 20 Degrees
Dimensions: 8”(L) x 7.75”(W) x 8.5”(H) 200 x 198 x 218
Colors: RGB + White
Weight: 4 Lbs./1.7 Kgs.
DMX Channels: 9 Channels
Fuse: 3 Amp
Duty Cycle: None
Warranty: 1 Year (365 Days)

Please Note: Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice.
Auto Sensing Voltage: This fixture contains an automatic voltage switch, which will auto-sense the voltage when it is plugged into the power source.

©2015 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ Products, LLC brands, and product names are trademarks or registered trademarks of their respective companies.

ADJ Products, LLC and all affiliated companies hereby disclaim any liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product

Europe Energy Saving Notice Energy Saving Matters (EuP 2009/125/EC) Saving electric energy is a key to help protect the environment. Please turn off all electrical products when they are not in use. To avoid power consumption in idle mode, disconnect all electrical equipment from power when not in use. Thank you!

FAQ

Q: What should I do if there is a marked change in performance?
- A: If you notice a marked change in performance, please contact ADJ for service.
Q: How can I register my warranty?
- A: To register your warranty, visit the ADJ Products, LLC website at www.adj.com

Follow Us On:

ADJ Products, LLC