LONPOO 615 Mini Hi-Fi Amplifier User Guide
- June 17, 2024
- LONPOO
Table of Contents
LONPOO 615 Mini Hi-Fi Amplifier User Guide
Power ON/OFF
Press to Power ON Press and hold to Power OFF
Applicable Devices
Coaxial/Optical IN: Compatible with DVD player, projectors, TV etc Line out: Compatible with active speaker Speaker out: Compatible with passive speaker
Bluetooth Connecting
Front Panel
-
Power ON/OFF >
Sources/Modes> Volume +/--
Power ON/OFF
Press the knob to Power ON the unit Press and Hold the knob to Power OFF the unit -
Sources/Modes
Press the knob to change the modes (Bluetooth/AUX/USB/Coaxial/Optical) -
Volume +/-
Turn the knob to volume up/down
The button can be rotated 360 degrees, and there will be a “beep” sound when the volume reaches the maximum.
-
-
Bass +/-
-
Treble +/-
-
AUX Input
-
USB in
-
Power Indicator Light
Red: Standby
Blue: Bluetooth
Green: AUX
Yellow: Coaxial
Light Blue: Optical -
Remote Sensor
Optical/Coaxial Connection
Press MODE button to select Optical or Coaxial Mode
AUX in/USB Connection
NOTE
No need to select modes when using USB and AUX, insert the sound source
directly and it will start to play the sound automatically
Product Specifications
LP-615 is a Hi-Fi wireless stereo 2-channel amply- fiery featuring 100W x 2 output, Bluetooth 5.3 allow- ink, 50 ft. (15m) streaming range.
Input Mode:
Bluetooth/AUX/USB/ Coaxial/Optical
Bluetooth Pair PIN Code:
0000 or 1234
THD:
≤ 0.5%
Output Mode :
Speaker out/ Line out
SNR :
98dB
Max Output Power:
100W+100W
Bluetooth Version:
Bluetooth 5.3
Input Sensitivity :
< 280mV
Power Supply :
100-240V/50-60Hz
Terminating Impedance:
22 – 80
Frequency Range:
20Hz-20kHz (±1 dB)
Bluetooth Transmission
Up to 50 Ft
Product Weight:
0.789KGS
Distance:
0-10M
Product Size:
175X140X55MM
This Unit works great with any 2-82 passive speakers.
Remote Control
Install two AAA size batteries (not included). Make sure to match the “+” and
“”
Standby/ON button
Press to turn on your Amplifier. Press again to return your Amplifier to
standby mode.
MODE
Press to cycle through the sound sources Bluetooth/AUX/USB /Coaxial/Optical.
MUTE
Press to enable/disable the audio output.
(PLAY/PAUSE)
Press to begin playback, press again to pause playback.
Press to Skip to a Previous/Next track. Press and hold to fast backward/fast forward.
Volume+/-
Raise/lower the volume
-TREBLE +
Raise/lower the treble
BASS-/BASS+
Raise/lower the Bass
RESET
Press to reset the Bass/Treble as default. Press and Hold to reset the Volume
as default.