ZEBRA ZD420 Barcode Printer User Guide
- June 17, 2024
- ZEBRA
Table of Contents
ZEBRA ZD420 Barcode Printer
Product Information
The ZD420 (203 dpi) is a printer manufactured by NBAutomation. It is designed for easy installation and support.
Specifications:
- Model: ZD420 (203 dpi)
- Manufacturer: NBAutomation
- Resolution: 203 dpi
Product Usage Instructions
Installing Drivers
- Download drivers for Zebra printers from the link: https://fr.seagullscientific.com.
- Double-click on the downloaded file to extract the contents in C: Seagull.
- Accept the license terms and choose “Leave C: Seagull” for the installation directory. Click “Next” to proceed.
- Uncheck the two options provided.
- Click “Finish” to extract the necessary files.
- Connect the printer to the electrical outlet and computer.
- Calibrate the printer according to the printer’s user manual.
Network Installation
If you wish to install the printer on a network, follow these steps:
- Ask your IT department to set up the printer on the print server using the provided configuration sheet.
- Once the network installation is complete, the computer will provide you with the name of the printer in the format/servernom_imprimante.
- On your workstation, add the printer as a network printer.
- The correct driver will install automatically.
FAQ
-
Q: Where can I download the drivers for the ZD420 printer?
A: You can download the drivers from the following link: https://fr.seagullscientific.com. -
Q: How should I calibrate the printer?
A: Please refer to the printer’s user manual for detailed instructions on calibrating the ZD420 printer. -
Q: How do I install the printer on a network?
A: To install the printer on a network, please follow the steps outlined in the “Network Installation” section of the user manual.
Installing Drivers
- Download drivers for Zebra printers from the link: https://fr.seagullscientific.com.
- Double-click on the file to extract the contents in C:\Seagull.
- Accept the license terms and make the following >
- Leave C:\Seagull for the installation directory and do Next again>
- Uncheck these 2 options
- Pressing Finish will extract the necessary files.
- Connect the printer to the electrical outlet and computer.
- Calibrate the printer:
- Apply the roll of paper and tape.
- Turn on the printer;
- Press PAUSE (ꞋꞋ) and CANCEL (X) at the same time for 2 seconds.
- In the Windows Setup Wizard, click Disk Provided…
- Type C:\Seagull (browse Zebra.inf) and then OK.
- Manufacturer: Zebra
- Printer: Zebra ZD420 (203 dpi) – ZPL
- Press Next and complete the installation.
NOTE: Do not take a ZDesigner template.
Network Installation:
Ask IT to set up the printer on the print server by providing them with the
printer and this configuration sheet. Once the network installation is
complete, the computer will provide you with the name of the printer which
will be of the type \\server\nom_imprimante. On the workstation, add the
printer (network). The correct driver will install automatically.
In ChronoMEDIC Production
On the Utility tab:
- Press the CONFIGURATION button (if you do not have access to the configuration menu, contact one of the system administrators or NB Automation to obtain a temporary access code).
- Make sure you are on the workstation on which you want to configure the printer.
- Press the PRINTERS button;
- Select the Pouch Label tab.
- Put the Form on Now.
- Using the … Select the device you just added.
- Select the WINDOWS communication mode.
- Set the Density to 20;
- Set the clipping position to +10
- Press the TEST PRINT button.
- Repeat steps 4 to 11 for other types of labels that will need to be printed with this printer.
- CLOSE
- ACCEPT
References
- Accueil - NB Automation
- Label & Barcode Creation Automation | BarTender by Seagull Scientific
- Label & Barcode Creation Automation | BarTender by Seagull Scientific
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>