SUNCO LIGHTING VTL Series LED Vapor Tight Light Instruction Manual

Table of Contents

SUNCO-LIGHTING-VTL-Series-LED-Vapor-Tight-Light-prodcut-
image

Specifications :

Features :

Model Specifications:

Model	Wattage	Lumen @50K	Lumen @130lm/w	CCT	Lens	Input Voltage
XS-VTL-50W-304050K-LV	(50/40/30) W	Max. 6500lm	30/40/50K selectable

AC120-277V 50/60Hz

Dimension & Weight:

Electrical Data:

Mode	Current (A)	Voltage (V)
XS-VTL-50W-304050K-LV	0.42 (120V), 0.24 (208V), 0.21 (240V), 0.18 (277V)

AC120-277V

Mounting:

The LED Vapor Tight Light can be surface mounted to the ceiling or wall, or suspended depending on the application.
To surface mount, secure the fixture using appropriate screws or mounting brackets.
To suspend, use the provided suspension kit and follow the instructions for installation.

Installation :

Ensure the power source is turned off before installation.
Select the desired mounting location for the LED Vapor Tight Light.
If surface mounting, mark the positions for screw holes or mounting brackets.
If suspending, determine the appropriate height and mark the positions for the suspension kit.
Securely mount the fixture using the appropriate method.
Connect the electrical wires to the corresponding terminals. (Consult a qualified electrician if needed)
Turn on the power and test the light fixture.

Dimming :

The LED Vapor Tight Light features a 0-10V dimmable driver, allowing for dimming from 100% down to off.
To dim the light, connect a compatible 0-10V dimmer switch to the fixture.
Follow the dimmer switch manufacturer’s instructions for proper installation and operation.

Optional Features :

If available, the sensor feature allows for automatic on/of based on motion detection.
If available, the emergency battery backup feature provides backup lighting during power outages.
Refer to the specific user manual or documentation for instructions on installing and configuring these optional features.

Frequently Asked Questions (FAQ)

Q: Can this light fixture be used in wet locations?
A: Yes, the LED Vapor Tight Light is suitable for wet locations.
Q: Is the wattage selectable?
A: Yes, the wattage of the LED Vapor Tight Light is selectable between 50W, 40W, and 30W.
Q: What is the warranty period for this product?
A: The LED Vapor Tight Light comes with a 5-year limited warranty.
Q: Can this light fixture be dimmed?
A: Yes, the LED Vapor Tight Light is dimmable using a compatible 0-10V dimmer switch.
Q: Are sensor and emergency battery backup features available?
A: Yes, the LED Vapor Tight Light offers optional sensor and emergency battery backup features. Please refer to the user manual for installation and configuration instructions.

Introduction

The VTL series vapor tight luminaire features a slim and modern design, making them ideal for low bay requirements in any location. It’s protected against moisture, steam and dust to handle the harshest weather.
This vapor tight ﬁxture oﬀers selectable wattage and color temperature, making it easy for distributors to stock and increase ﬂexibility for project changes.
It can be surface mounted to the ceiling or wall, or suspended depending on the application. Sensor and emergency battery backups are optional.

Electrical:

Optics:

Finish:
Housing is permanent pearl gray color.

Mounting:
Support surface mounting.

Compliances:

cULus listed for wet locations, environment temperature from -40°F to 113°F.
DLC® (Design Lights Consortium) Qualiﬁed. Please refer to the DLC website for speciﬁc product qualiﬁcations at www.designlights.org.