AIPHONE NEM Vandal Resistant Sub Station Instruction Manual

: June 17, 2024
: AIPHONE

Table of Contents

AIPHONE NEM Vandal Resistant Sub Station
Frequently Asked Questions
INSTRUCTIONS
INSTALLATION
Dimension
WIRING DIAGRAMS
NE-SSV BACK VIEW
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AIPHONE NEM Vandal Resistant Sub Station

Product Information

The Vandal Resistant Sub Station with built-in Color Pinhole Camera is designed for use with NEM, NDR, and NDRM Systems. It features a speaker, a camera call button, and a compact design for easy installation. The front view of the sub station includes a transparent corner shadowing, which is normal and does not affect the performance of the product.

NE-SSV Back View

The NE-SSV substation’s back view includes a colour camera, call button, speaker, and a yellow BNC connector for video output. The terminal colours are as follows: Red (# terminal of Master), Blue (Corridor Lamp – optional), and Black (E of Master). There is also a purple relay for call-in closure (optional).

Specifications

Audio Power Source:
Speaker:
Call Button:
Call Annunciation:
Communication:
CCTV Camera Output:
Iris Control:
Minimum Illumination:
Camera image sensor:
Focal Length:
Effective Pixels:
Camera Power Source:
MTBF:
Faceplate:
Mounting:
Terminations:
Operating Temperature:
Audio Wiring:
Audio Wiring Distance:
Video Wiring:
Dimensions (HxWxD):

Product Usage Instructions

Installation

To install the Vandal Resistant Sub Station, follow these steps:

Choose a suitable location for the sub station.
Ensure that the wiring is in place according to the provided wiring diagrams.
Mount the sub station securely using the provided mounting equipment.
Connect the necessary cables to the appropriate terminals.
Test the sub station to ensure proper functionality.

Usage

To use the Vandal Resistant Sub Station, follow these instructions:

Press the camera call button to initiate a call.
Speak clearly into the speaker to communicate with the intended recipient.
Listen for any announcements or responses through the speaker.
Monitor the video output on a compatible monitor or CCTV system.
Follow any additional instructions provided by the system or user manual.

Frequently Asked Questions

Can the substation be used with a fiber optic interface?
No, the video input on the IFS VIC-5211 is not compatible with the NE-SSV camera. The VIC-5211 can only be used for audio, and a separate fiber module is required for video.

INSTRUCTIONS

The NE-SSV is a 2-gang vandal and weather resistant sub station designed for use with the NEM, NDR and NDRM systems. It is constructed of 12 gauge stainless steel and has a stand-alone color camera built in. It is also equipped with an option for an external output contact closure when the substation places a call (relay required). The unit either flush mounts into a 2-gang box, or surface mounts using the SBX-2G. Each unit includes a 12V DC power transformer for the camera, tamper-proof screws, and a tool for installation.

INSTALLATION

For flush mounting, install sub station in standard 2-gang electrical box with minimum 2-1/2″ depth.
For surface mounting, use the SBX-2G surface mount enclosure (sold separately).
Only the 12V DC power transformer included should be used to power the NE-SSV camera.
IMPORTANT! These units are designed for use in normal weather conditions, and to allow drainage and evaporation of moisture that naturally gets into the unit. Do not apply caulking or silicone sealant around the unit when installing, and do not use weather stripping around the perimeter of the box when mounting. If sealing the unit is required, the bottom must remain unsealed. Sealing the unit will prevent or inhibit moisture from dissipating from inside the unit, which may cause corrosion or deterioration of the internal components over time.

AIPHONE-NEM-Vandal-Resistant-Sub-Station-fig-1

Dimension

AIPHONE-NEM-Vandal-Resistant-Sub-Station-
fig-2

The view achieved if the subject is 20″ from the camera is: 18″ Vertically and 26½” Horizontally

WIRING DIAGRAMS

AIPHONE-NEM-Vandal-Resistant-Sub-Station-
fig-4

NE-SSV BACK VIEW

AIPHONE-NEM-Vandal-Resistant-Sub-Station-
fig-6

SPECIFICATIONS

Audio Power Source: Supplied by master station
Speaker: 20 ohms, 4W, 2″ diameter, water proof and puncture resistant, 2.4 oz. magnet
Call Button: SPST call button, momentary activation. Limited stop button.
Call Annunciation: Pressing the call button at sub activates and latches call at NEM/NDR/NDRM master. The master station’s LED will be lit and a ringing tone will be heard until the call is answered.
Communication: Hands free at sub. Master is push-to-talk or VOX with handset.
CCTV Camera Output: 75 Ohm, 1Vp-p, NTSC, DC-coupled
Iris Control: Auto
Minimum Illumination: 1.0 lux
Camera image sensor: 1/3″ CCD
Focal Length: 4.3mm Cone Pinhole Lens (78°)
Effective Pixels: 510(H) x 492(V) NTSC
Camera Power Source: 12V DC, 100mA (via included power supply)
MTBF: (Mean Time Before Failure) 80,000 Hours
Faceplate: 12 gauge stainless steel
Mounting: Flush mount into a 2-gang box (minimum 2-½” depth) or surface mount into SBX-2G (sold separately) Tamper-proof screws included (6×32 for use with flush 2-gang box) with T-10 TORX bit When using SBX-2G, use the hardware included with that unit.
Terminations: Color-coded prewired pigtails
Operating Temperature: 14 F ~ 140°F (-10°C ~ 60°C)
Audio Wiring: 2 conductors homerun; or 1 common plus 1 individual per sub, looped through each sub. A shielded cable is recommended. Use Aiphone #822202 or #821802 for homerun wiring, #822206 for up to 5 stations on each run, or #822210 for up to 9 stations on each run.
Audio Wiring Distance: 420′ with 22AWG; 1,000′ with 18AWG
Video Wiring: Independent BNC connection from substation pigtail to destination video device
Dimensions (HxWxD): NE-SSV alone: 4-11/16″ x 4-11/16″ x 2″ With SBX-2G: 4-3/4″ x 4-7/8″ x 3-5/8″ (Top) 2-3/8″ (Bottom)