ALTEC LANSING MZX890L Glow Run Earbuds User Guide

: June 17, 2024
: Altec Lansing

Table of Contents

ALTEC LANSING MZX890L Glow Run Earbuds
Product Information
Product Usage Instructions
Frequently Asked Questions (FAQ)
1. How long does it take to charge the Glow Run Earbuds?
2. Can I control the volume with the earbuds?
3. How do I pair the Glow Run Earbuds with my device?
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ALTEC LANSING MZX890L Glow Run Earbuds

ALTEC-LANSING-MZX890L-Glow-Run-Earbuds-PRODUCT

Product Information

Specifications

Product Name: Glow Run Earbuds
Model Number: MZX890L
Charging Port: USB
LED Indicator Light/ Microphone: Yes
Indicator Light Button: Yes
Next Track/Volume Up Power/Play/Pause/Answer/Just Ask Button: Yes
Last Track/Volume Down Button: Yes
Charging Time: 2 hours for a full charge
Light Modes: Solid, Blinking, Off

Product Usage Instructions

Powering On and Bluetooth Pairing

To power on the Glow Run Earbuds, press and hold the Power/Play/Pause/Answer/Just Ask button for 3-4 seconds. The LED indicator light will start flashing red and blue, indicating that the earbuds are in pairing mode.

Once the earbuds are in pairing mode, you can connect them to your device. On your device, go to the Bluetooth settings and search for available devices. Look for “Altec Glow Run” and select it to pair. Once paired, the LED indicator light will start slowly flashing blue.

Charging

To charge the Glow Run Earbuds, connect them to a power source using the provided USB cable. The LED indicator light will turn red, indicating that the earbuds are charging. Once fully charged, the LED indicator light will turn blue.

Controlling Music

To control the music playback, use the following buttons on the earbuds:

Volume Up: Press once to increase the volume.
Volume Down: Press once to decrease the volume.
Play/Pause: Press once to play or pause the music.
Next Track: Press and hold for 2 seconds to skip to the next track.
Previous Track: Press and hold for 2 seconds to go back to the previous track.

Phone Calls and Light Mode

To answer an incoming call, press the Answer/Just Ask button once. To end a call, press the Answer/Just Ask button again.

To reject an incoming call, press and hold the Answer/Just Ask button for 2 seconds.

You can also alternate between three light modes (Solid, Blinking, Off) by pressing the Light Mode button once or pressing and holding it for 2 seconds . ALTEC-LANSING-MZX890L-Glow-Run-Earbuds-FIG-2

Frequently Asked Questions (FAQ)

1. How long does it take to charge the Glow Run Earbuds?

It takes approximately 2 hours for the earbuds to fully charge.

2. Can I control the volume with the earbuds?

Yes, you can control the volume by pressing the Volume Up and Volume Down buttons on the earbuds.

3. How do I pair the Glow Run Earbuds with my device?

To pair the earbuds with your device, make sure they are in pairing mode (LED indicator flashing red and blue) and then search for available devices in your device’s Bluetooth settings. Select “Altec Glow Run” to pair.

4. How do I answer an incoming call?

To answer an incoming call, press the Answer/Just Ask button once.

5. Can I use the Glow Run Earbuds while exercising?

Yes, the Glow Run Earbuds are designed for active use and can be used while exercising.