artsound MX-2406M Six Zone Mixing Amplifier Instruction Manual Specifications Product Usage Instructions Specifications FAQ
- February 14, 2024
- ArtSound
Table of Contents
MX-2406M Six Zone Mixing Amplifier
Specifications
- Six-zone mixing amplifier 100V
- Built-in multimedia source
- Expandable to 6 units max
Product Usage Instructions
1. Safety Precautions
Before operating the product, it is important to understand the
safety symbols and messages to prevent any potential safety risks.
Please read the manual thoroughly.
-
WARNING: Indicates a potentially hazardous
situation which, if mishandled, could result in death or serious
personal injury. -
CAUTION: Indicates a potentially hazardous
situation which, if mishandled, could result in moderate or minor
personal injury, and/or property damage.
Warning:
-
When installing the unit, avoid exposing it to direct sunlight
or locations generating sooty smoke or steam to prevent fire or
electric shock. -
When the unit is in use, do not open the cover or touch the
internal components. Refer servicing to an authorized ArtSound
dealer.
Caution:
-
When installing the unit, avoid exposing it to direct sunlight,
heaters, or locations generating sooty smoke or steam to prevent
fire or electric shock. -
When the unit is in use, unplug it from the AC outlet before
cleaning or leaving it unused for 10 days or more to prevent fire
or electric shock. -
An all-pole mains switch with a contact separation of at least
3 mm in each pole should be incorporated in the electrical
installation of the building.
Note: Due to product upgrades, some features and
specifications mentioned in the user manual may not match the
actual functions. We apologize for any inconvenience and appreciate
your understanding.
2. General Description
The MX-2406M/MX-5006M is a six-zone mixing amplifier with
built-in multimedia source. It is suitable for use in schools, home
offices, or shops as part of a PA system.
3. Features
- Expandable to 6 units maximum
4. Nomenclature and Functions
4.1 Front Panel
- MIC1-4 volume control
- MIC1-4 treble and bass control
- LINE1-2 volume control
- LINE1-2 treble and bass control
- MASTER volume
- ON/OFF switch
- LED indicator (PROT/CLIP/SIG/AC/DC)
4.2 Remote Control (Built-in Music Source)
The remote control functions are not described in this manual.
Please refer to the separate remote control manual for instructions
on how to use the built-in music source.
4.3 Rear Panel
The rear panel contains various input and output connectors.
Refer to the diagram above for detailed information on each
connector.
5. Use
To use the MX-2406M/MX-5006M:
-
Ensure the unit is properly installed and connected to the
required power source. -
Connect your audio sources to the appropriate input connectors
on the rear panel. -
Adjust the volume, treble, and bass controls for each
microphone (MIC1-4) and line input (LINE1-2) as desired. -
Adjust the master volume control to set the overall output
level. -
Use the ON/OFF switch to power on or off the unit.
-
Monitor the LED indicator for any protection (PROT), clipping
(CLIP), signal (SIG), AC, or DC status.
6. Applications
The MX-2406M/MX-5006M can be used in various applications
including:
- School PA systems
- Home office audio setups
- Retail shop background music systems
Specifications
The specifications for the MX-2406M/MX-5006M are as follows:
- Input sensitivity: -50 dBV (MIC), -20 dBV (LINE)
- Output power: 240W (MX-2406M), 500W (MX-5006M)
- Frequency response: 20 Hz – 20 kHz
- Total harmonic distortion: <0.5%
- Signal-to-noise ratio: >80 dB
- Power supply: AC 220-240V, 50/60 Hz
- Dimensions: 483 x 88 x 320 mm
- Weight: 9.5 kg (MX-2406M), 11.5 kg (MX-5006M)
FAQ
Q: Where can I find updates for this manual?
A: Please check our website at www.artsound.be for
any updates to the
manual.
Q: What should I do if the features and specifications in the
manual do not match the actual functions?
A: Due to product upgrades, some features and specifications
mentioned in the user manual may not match the actual functions. We
apologize for any inconvenience caused and appreciate your
understanding.
Operating Manual
MX-2406M MX-5006M
SIX ZONE MIXING AMPLIFIER
Please follow the instructions in this manual to obtain the optimum results
from this unit. We also recommend that you keep this manual handy for future
reference Check our website for any updates of this manual: www.artsound.be
House of Music nv Ronse, Belgium www.artsound.be Tel. +32 9 380 81 80 Fax. +32
9 386 12 35 info@artsound.be
MX-2406M / MX-5006M
Table of contents
1. Safety precautions
3
2. General description
4
3. Features
4
4. Nomenclature and functions
5
4.1 front panel
5
4.2 Remote control (built-in music source)
5
4.3 rear panel
6
5. Use
6
6. Applications
8
7. Specifications
9
8. FAQ
9
9. Block diagram
10
10. Dimensional diagram
11
2
MX-2406M / MX-5006M
1 Safety precautions.
· Be sure to read the instructions in this section carefully before use. ·
Make sure to observe the instructions in this manual as the conventions of
safety symbols and messages regarded
as very important precautions are included. · We also recommend you keep this
instruction manual handy for future reference.
Warnings and safety.
Safety Symbol and Message Conventions.
Safety symbols and messages described below are used in this manual to prevent
bodily injury and property damage, which could result from mishandling. Before
operating your product, read this manual first and understand the safety
symbols and messages so you are thoroughly aware of the potential safety risk.
WARNING Indicates a potentially hazardous situation which, if mishandled, could result in death or serious personal injury.
CAUTION Indicates a potentially hazardous situation which, if mishandled, could result in moderate or minor personal injury, and/or property damage.
Warning.
When Installing the Unit.
· Do not expose the unit to rain or an environment where it may be splashed by
water or other liquids, as doing so may result in fire or electric shock.
· Use the unit only with the voltage specified on the unit. Using a voltage
higher than that which is specified may result in fire or electric shock.
· Do not cut, kink, otherwise damage nor modify the power supply cord. In
addition, avoid using the power cord in close proximity to heaters, and never
place heavy objects — including the unit itself — on the power cord, as doing
so may result in fire or electric shock.
· Be sure to replace the unit’s terminal cover after connection completion.
Because high voltage is applied to the speaker terminals, never touch these
terminals to avoid electric shock.
· Be sure to ground to the safety ground (earth) terminal to avoid electric
shock. Never ground to a gas pipe as a catastrophic disaster may result.
· Avoid installing or mounting the unit in unstable locations, such as on a
rickety table or a slanted surface. Doing so may result in the unit falling
down, causing personal injury and/or property damage.
When the Unit is in Use.
· Should the following irregularity be found during use, immediately switch
off the power, disconnect the power supply plug from the AC outlet and contact
your nearest ArtSound dealer. Make no further attempt to operate the unit in
this condition as this may cause fire or electric shock. · If you detect smoke
or a strange smell coming from the unit. · If water or any metallic object
gets int o the unit · If the unit falls, or the unit case breaks · If the
power supply cord is damaged (exposure of the core, disconnection, etc.) · If
it is malfunctioning (no tone sounds.)
· To prevent a fire or electric shock, never open nor remove the unit case as
there are high voltage
components inside the unit. Refer all servicing to your
nearest ArtSound dealer.
· Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they accidentally spill into
the unit, this may cause a fire or electric shock. · Do not insert nor drop
metallic objects or flammable materials in the ventilation slots of the unit’s
cover, as this may result in fire or electric shock.
3
MX-2406M / MX-5006M
Caution.
When Installing the Unit.
· Never plug in nor remove the power supply plug with wet hands, as doing so
may cause electric shock.
· When unplugging the power supply cord, be sure to grasp the power supply
plug; never pull on the cord itself. Operating the unit with a damaged power
supply cord may cause a fire or electric shock.
· When moving the unit, be sure to remove its power supply cord from the wall
outlet. Moving the unit with the power cord connected to the outlet may cause
damage to the power cord, resulting in fire or electric shock. When removing
the power cord, be sure to hold its plug to pull.
· Do not block the ventilation slots in the unit’s cover.
Doing so may cause heat to build up inside the unit and result in fire. ·
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or steam as doing otherwise
may result in fire or electric shock.
When the Unit is in Use.
· Do not place heavy objects on the unit as this may cause it to fall or break
which may result in personal injury and/or property damage. In addition, the
object itself may fall off and cause injury and/or damage.
· Make sure that the volume control is set to minimum position before power is
switched on.
· Loud noise produced at high volume when power is switched on can impair
hearing.
· Do not operate the unit for an extended period of time with the sound
distorting. This is an indication of a malfunction, which in turn can cause
heat to generate and result in a fire.
· Contact your ArtSound dealer as to the cleaning. If
dust is allowed to accumulate in the unit over a long period of time, a fire
or damage to the unit may result. · If dust accumulates on the power supply
plug or in the wall AC outlet, a fire may result. Clean it periodically. In
addition, insert the plug in the wall outlet securely.
· Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or more. Doing otherwise may
cause a fire or electric shock.
An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building.
Due to product upgrades, while some of the features and specification in the user manual does not match the actual functions, sorry for any inconvenience and thanks for your kind understanding!
2. General description.
Six-zone mixing amplifier 100V is provided with built-in multimedia source.
Suited for all uses of a PA system in schools, home offices or shops.
3. Features
· 4 inputs MIC, 2 inputs LINE, separate treble and bass tuning per channel
· 6 zone outputs with separate volume control · Built-in siren (2/4-tone) and
alarm · Built-in multimedia source with USB/SD/Bluetooth and
FM tuner sound output. Microphone recording function. · 24V DC power input ·
48V phantom power for MIC1-4 with selector switch · Optional selective calling
console MIC-216 –
expandable to 6 units max
· 5 priority levels with the following order: · EMC input (externally
transmitted signal) · ALARM trigger (built-in) · TEL input/REMOTE MIC
(MIC-216) · CHIME (ringtone) · MIC1 (with precedence over MIC2-4/LINE1-2)
· 70V/100V speaker output/4-16 Ohm speaker output (monitor function)
4
MX-2406M / MX-5006M
4. Nomenclature and functions.
4.1 Front panel
11
10 9
87
BASS MIC1
TREBLE
US B SD
MODE
S D /M E D I A
BASS MIC2
TREBLE
BASS MIC3
TREBLE
ALL CALL
ZONE1
ZONE2
ZONE3
ZONE4
ZONE5
ZONE6
3 2
1
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
6
PROT
PWR
CLIP
AC
SIG
DC
BASS
BASS
BASS
MASTER
MIC4
LINE1
LINE2
ON
OFF
TREBLE
TREBLE
TREBLE
12
34
5
6
1. MIC1-4 volume controle 2. MIC1-4 treble en bass controle 3. LINE1-2 volume controle 4. LINE1-2 treble en bass controle
5. MASTER volume 6. ON/OFF 7. LED indicator (PROT/CLIP/SIG/
POWER/AC/DC)
8. 6-zone volumeregelaars 9. 6-zone on/off + indicator 10. Algemene oproep 11. Multimedia bron (FM/USB/SD/BT)
4.2 Remote control (built-in music source)
10 9
1
S T OP
2
MOD E
EQ
3
4
5
1. ON/OFF
2. Mode (source selection)
8
3. Previous/next
4. Volume +/-
7
5. 0~9
6. Play/pause
6
7. EQ
8. Mute
9. Repeat
10. Stop
Normal range with use of remote control is 8 metres. Reduced performance may indicate reduced power of the battery.
5
MX-2406M / MX-5006M
4.3 Rear panel.
15 13
17
16 14 12 11 10
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
COM 100V COM 100V COM 100V COM 100V COM 100V COM 100V
REMOTE MIC
MUTE EMC TEL TEL G +G +
LINE OUT
LINE2 LINE1
IN
IN
FM ANT G +
BATT SUPPLY
OUTPUT
24V
8A COM 4-16 70V 100V
CHIME SIREN
MIC 4
XLR BAL 1-GND 2-HOT+ 3-COLD-
MIC 3
MIC 2
MIC 1
SIREN CHIME COM LINE MIC PHANTOM LINE MIC PHANTOM LINE MIC PHANTOM LINE MIC PHANTOM
1
2
3 4 567
89
1. AC power supply 2. Ventilation grid 3. 24V DC power supply (backup) 4.
4~16/70V/100V speaker clamps
COM = speaker mass 70V/100V = speaker “+” terminal 4~16 = terminal for
speakers 4~16 5. Alarm/Siren trigger
6. Siren volume control
7. Alarm volume control
8. Selection button LINE/MIC/phantom power 9. MIC1/MIC2/MIC3/MIC4 balanced input 10. RCA line signal input 11. RCA line signal output 12. Tel. input volume control 13. Tel. signal input 14. EMC input 15. MUTE input 16. MIC-216 (selective calling console) input 17. 6-zone 100V speaker output
5. Use.
5.1 Connect the speakers
OUTPUT COM 4-16 70V 100V
OUTPUT COM 4-16 70V 100V
Total impedance
20 (MX-2406M) 9.8 (MX-5006M)
OUTPUT COM 4-16 70V 100V
Total impedance
41 (MX-2406M) 20 (MX-5006M)
4~16
70V LINE
· Make sure the equipment is switched off before
connecting the speakers. When the equipment is
switched on, there is a risk of electric shock. · It is not possible to use
the 4 ~ 16/70V/100V
terminals simultaneously.
· Make sure the speaker wires are not strained.
100V LINE
· During installation of the speakers, make sure the sum of nominal input
power of the speakers to be connected is lower than the nominal power of the
equipment.
WARNING
Make sure to attach the included cover after completing the connection. Never
touch the speaker terminals to prevent electric shock. Do not install this
amplifier in a small room with insufficient ventilation.
6
MX-2406M / MX-5006M
5.2 Connect any external equipment
· Make sure the equipment and all connected equipment are switched off. · Use
the corresponding cable to connect this equipment and other external devices.
5.3 Connect the power supply and switch on the equipment · Make sure the
amplifier and connected devices are switched off. · Turn the volume button
(MASTER volume) to the left. · Connect the supplied AC power cable. · Switch
on the connected external equipment, then the amplifier.
5.4 Use of microphone · Turn the volume control of the selected input to the
left. Connect the microphone to the amplifier. · Turn the volume control to
the desired position. · Position the microphone and speak clearly while the
volume button is turned to the left and no distortion occurs.
5.5 Switch off · Turn the volume button to the left to minimum. · Switch off
the ON/OFF button on the amplifier, then on the switched-on external devices.
WARNING
· Wait for about 5 sec. before you switch the equipment on again after
switching it off.
Switching it on and off continuously may cause breakdown of the amplifier.
· Even after switching it off, some residual power is always still present.
Pull the plug out of the socket if you do not use the amplifier for extended
periods of time.
5.6 Built-in multimedia source
· USB/SD input : auto display as soon as medium is placed
USB
· `MODE’ button choice selection source FM/Bluetooth or MP3 play-
SD
back
MODE
· button : short pulse = previous number/long pulse = volume button: short pulse = next number/long pulse = volume+
S D /M E D I A
button: press to pause music, press again to continue playing
5.7 Bluetooth function
· Press the `MODE’ key until Bluetooth appears. · Go to Bluetooth settings in
in the device to be connected and connect with amplifier. · Once connected,
the device is automatically recognised.
5.8 Selection button LINE/MIC/PHANTOM
MIC 1
· Select LINE when external devices type CD, DVD or other
LINE MIC PHANTOM
are connected.
· Select MIC when a condenser microphone with power is
connected. · Select PHANTOM to use the 48V built-in phantom power
for microphones without power of their own.
5.9 Selective calling microphone (MIC-216)
· Connect the MIC-216 to one of the RJ-45 terminals on the back of the device
to use this selective or general calling option and remote activation of the
built-in tone generator.
7
8
AC power input
Zone6
MIC-216
POWER
ON
24V
500m A
LINK
OFF
CHIME VOL.
MIC MASTER VOL. VOL.
CHIME 4 TONE
2 TONE
PR-1xxx / PR-4xxx
SRC-2221
CD PLAYER
Zone2 Zone1
……
Tel Input
SRC-2221
CD PLAYER
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
COM 100V COM 100V COM 100V COM 100V COM 100V COM 100V
REMOTE MIC
MUTE EMC TEL TEL G +G +
LINE OUT
LINE2 LINE1
IN
IN
FM ANT G +
BATT SUPPLY
OUTPUT
24V
8A COM 4-16 70V 100V
CHIME SIREN
MIC 4
XLR BAL 1-GND 2-HOT+ 3-COLD-
MIC 3
MIC 2
MIC 1
SIREN CHIME COM LINE MIC PHANTOM LINE MIC PHANTOM LINE MIC PHANTOM LINE MIC PHANTOM
4- 16 70V
100V
MIC 4
MIC 3
MIC 2
MIC 1
MX-2406M / MX-5006M
6. Applications.
MX-2406M / MX-5006M
7. Specifications.
Model Output power Speaker terminals Input sensitivity
Pre-output Microphone frequency
Frequency response
Signal-to-noise ratio Total harmonic distortion Indicator Short-circuit
protection Cooling method Protection Operation Temperature Storage Temperature
Permitted humidity level Voltage
Power consumption Weight Dimensions
MX-2406M
MX-5006M
240W
500W
4~16/ 70V/100V
MIC:5mV ±1mV
LINE: 350mV±20mV
AUX: 350mV±20mV
EMC/TEL: 775mV
AUDIO OUT: 1V±50mV/ 100
Low frequency:±10dB at 100Hz
High frequency:±10dB at 10KHz
MIC: 80H 16KHz (±3dB)
LINE: 20Hz 20KHz (±3dB)
MIC: 65dB; Music:70dB
THD+ N0.1%
Power indicator
Short-circuit, no voltage
Air cooling
Overheat/Short-circuit
+5°C~+40°C
-20°C~+70°C <95%(No condensation) ~110V 50Hz ~120V 50Hz ~220V 50Hz ~230V 50Hz ~240V 50Hz
~110V 60Hz ~120V 60Hz ~220V 60Hz ~230V 60Hz ~240V 60Hz
380W 7.2Kg
800W 8.4Kg
484 x 353 x 88 mm
8. FAQ.
Symptom 1. Equipment won’t start
2. All is connected but there is no sound
3. The sound disappears 4. Volume level too low 5. The sound is distorted
Cause
· Check the power cable on voltage. · The equipment is still in `safety’ mode.
Check the LED indication and let the
equipment cool off.
· The amplifier is not switched on or the power is poorly connected. · The
fuse is defective. · The volume control is not set high enough. · There is no
incoming signal · There is short circuit on the speaker line
· The amplifier has gone into safety mode tot o high temperatures. · There is
a poor speaker connection.
· Low-ohm speakers are connected to the 70V/100V speaker terminal. · The
volume controls are not set high enough.
· The input volume signal of the external equipment or microphone are set too
high.
9
10
M UTE EMC TEL
REMOTE MIC 12 11 10 9
J5A
0
6 5
MUTE
4
3
2
1
GND
8 7 6 5 4 3 2 1
RS485
SIREN CHIME
3 2 1
GND
MIC1A BAL/UNBAL
MIC1B T R S
MIC2A
BAL/UNBAL
MIC2B T R S
MIC3A
BAL/UNBAL
MIC3B T R S
X1 X2 X3
5 6 4 3 2 1
X1 X2 X3
5 6 4 3 2 1
X1 X2 X3
5 6 4 3 2 1
MIC4A
BAL/UNBAL
MIC4B T R S
X1 X2 X3
5 6 4 3 2 1
LINE MIC PHANTOM
LINE MIC PHANTOM
LINE MIC PHANTOM
LINE MIC PHANTOM
LINE1
LINE2
EMC
EMC Highest priority
LEVEL
TEL/REMOTE MIC
TEL/REMOTE Second priority
LEVEL EMC
GND
SIREN SIREN third priority
LEVEL EMC
TEL/REMOTE MIC
CHIME
CHIME Fourth priority
GND
LEVEL BASS TREBLE 2-STAGE EQ BASS TREBLE
EMC
TEL/REMOTE MIC SIREN
GND
MUTE_MIC1 MIC1 Fifth priority
LEVEL
EMC TEL/REMOTE MIC
SIREN CHIME
GND
2-STAGE EQ BASS TREBLE
2-STAGE EQ
LEVEL LEVEL
EMC TEL/REMOTE MIC
SIREN CHIME MUTE_MIC1 MUTE
Q1 GND
BASS TREBLE
2-STAGE EQ
LEVEL
BASS TREBLE
2-STAGE EQ BASS TREBLE
LEVEL
2-STAGE EQ
LEVEL
M P3/BT
LI NE OUT
34
34
34
34
34
34
2
52
52
52
52
52
5
1
61
61
6
1
61
61
6
M ASTER LEVEL
Output transformer
120W/240W
Power amplifier module
= =
=
=
1
2
3
4
0
5
6
1
2
3
4
0
5
6
4 3
5
1
2
4 3
5
1
2
COM 1 100V 2 COM 3 100 V 4 COM 5 100 V 6 COM 7 100 V 8 COM 9 100 V 10 COM 11
100 V 12
1 2 3 4 5 6
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6
BATT SUPPLY COM4-16 70V-100V
DC 24V inverter power supply
switching power supply
EMC Highest priority Single-chip
EMC
ALL ZONE
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
MX-2406M / MX-5006M
9. Block diagram.
MX-2406M / MX-5006M
10. Dimensional diagram.
UNIT : mm
484
BASS MIC1
TREBLE
US B SD
S D /M E D I A
MODE
BASS MIC2
TREBLE
BASS MIC3
TREBLE
ALL CALL
ZONE1
ZONE2
ZONE3
ZONE4
ZONE5
ZONE6
3 2
1
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
6
PROT
PWR
CLIP
AC
SIG
DC
BASS
BASS
BASS
MASTER
MIC4
LINE1
LINE2
ON
OFF
TREBLE
TREBLE
TREBLE
88 94
436
ZONE 1
ZONE 2
ZONE 3
ZONE 4
ZONE 5
ZONE 6
COM 100V COM 100V COM 100V COM 100V COM 100V COM 100V
REMOTE MIC
MUTE EMC TEL TEL G +G +
LINE OUT
LINE2 LINE1
IN
IN
FM ANT G +
BATT SUPPLY
OUTPUT
24V
8A COM 4-16 70V 100V
CHIME SIREN
MIC 4
XLR BAL 1-GND 2-HOT+ 3-COLD-
MIC 3
MIC 2
MIC 1
SIREN CHIME COM LINE MIC PHANTOM LINE MIC PHANTOM LINE MIC PHANTOM LINE MIC
PHANTOM
8 4
84
328 25
6
Keep the unit’s all sides over 10 cm away from objects that may obstruct air
flow to prevent the unit’s internal temperature rise. UNIT : mm
Over 100
BASS MIC1
TREBLE
US B SD
S D /M E D I A
MODE
BASS MIC2
TREBLE
BASS MIC3
TREBLE
ALL CALL
ZONE1
ZONE2
ZONE3
ZONE4
ZONE5
ZONE6
3 2
1
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
3 2
61
4 5
6
PROT
PWR
CLIP
AC
SIG
DC
BASS
BASS
BASS
MASTER
MIC4
LINE1
LINE2
ON
OFF
TREBLE
TREBLE
TREBLE
Over 100
Over 100
11
Discover the complete ArtSound range at www.artsound.be
TM
Art_Sound
House Of Music NV Ronse, Belgium
www.artsound.be Tel. +32 9 380 81 80 Fax. +32 9 386 12 35
info@artsound.be
References
- Manual-Hub.com - Free PDF manuals!
- Speakers and multiroom systems webshop | ArtSound
- Manual-Hub.com - Free PDF manuals!