artsound PWR09 Portable Bluetooth Party Speaker User Manual

artsound PWR09 Portable Bluetooth Party Speaker

Dear Customer, congratulations on the purchase of this loudspeaker. Please read these instructions carefully and keep them for further reference.

WARNINGS AND SAFETY

• To prevent fire or electric shocks, the device must not be exposed to rain or humidity.
• For your own safety: to prevent electric shocks do not remove the housing.
• Do not try to repair any malfunctioning parts of the device yourself. Ask a professional expert to do this for you.
• When plugged into the mains, the device remains electrically charged even when switched off.

CONTENTS OF THE BOX

• PWR09
• User instructions
• Power cable
• Remote control (AAA)

GENERAL DESCRIPTION

The PWR09 includes high-output compression drivers, and a double 6.5” woofer that produces an even and smooth studio quality sound at all levels. With accurate playback, smooth dispersion of mid and high frequen-cies, and an ergonomic design for easy transport and setup.

FEATURES

• Steel basket woofer
• Auxiliary line input
• Stereo Bluetooth Pairing
• Built-in DSP Processor
• USB Playing and Charging
• Built-in Rechargeable Battery (2 x 4500 mAh)
• High Temperature Voice Coil
• LED light effects
• Remote Control

FUNCTIONS

1. Pairing button
   Press this button to switch between Bluetooth/USB input/Aux input.
   Note : The default is Bluetooth mode.

2. EQ button
   Press this button to change through the different EQ modes (Rock/Pop/Classic/Country/Jazz/Bass). Press and hold this button for 2-3 seconds to enter LINK OUT mode (Aux light flashes slowly).

3. Light control button
   Press this button to change the different light modes. Press and hold this button for 2-3 seconds to turn off the light.

4. Volume Control

5. TWS button
   Press this button for a stereo Bluetooth connection with a 2nd PWR09.
   Volume control Used to adjust the volume of the connected microphone (not included).

6. Bass control
   Used to adjust the bass of the microphone (not included).

7. Mic Input
   Use a 1/4” jack connector balanced or unbalanced.

8. USB Port
   to play music files from a USB drive or to charge your external device.

9. Aux in
   to connect an external audio source.

10. Link out.
    Note: If you use the RCA cable link to the next speaker, the sound may not be synchronized, please press and hold the EQ button for 2-3 seconds on the first PWR09 to synchronize the speaker automatically.

11. Power Supply Input Connector
    Use a power cord.

12. Battery level LED indicator

Warning: Make sure the speaker is off and all LEVEL controls are down (counterclockwise) before every use.

REMOTE CONTROL

1. On / Off: Used to turn the speaker on or off.
2. Mute: Press to mute the sound of the speaker.
3. Repeat: Used for repeat play in USB mode.
4. EQ button: Switch between 6 EQ profiles : Rock / Pop / Classical / Country / Jazz / Extra Bass
5. Play / Pause.
6. Next / Previous.
7. Volume: Volume down, Volume up.
8. Bluetooth / USB / AUX: Press to change source.
9. LED Switch Button: Turns the illumination on or off.
10. LED Mode button: Press this button to cycle through the different LED modes.
11. Folder function: Used for folder navigation in USB mode.

CONNECTIONS

1. Connect the output from your signal source (mixing  console, microphone, preamp, or other mic- or line-level source) directly to the INPUT connector on the back of the speaker. It accepts balanced line-level signals from mixers, preamplifiers, CD players, tape decks, etc., and accepts direct con-nections from dynamic microphones through the MIC input.
2. There is also RCA Output connector labeled LINE OUT. This allows you to connect more than one PWR09 to the output of your sound source. Simply plug RCA cable from the Line Out connector of one speaker to the input connector of another speaker, and so on, daisy-chaining multiple speakers.
3. Turn on your signal source. (Make sure volume is turned down) Turn on PWR09. Start signal source and adjust volume controls on the signal source and PWR09 speaker.

BLUETOOTH CONNECTION

1. When Power on, Bluetooth mode is automatically activated.
2. Search for “PWR09” on your device and connect. Note: You can’t start a new pairing request while a device is already connected. Press and hold the “PAIRING MODE” button for 2-3 seconds to disconnect the previous pairing, then you can start a new pairing.

STEREO BLUETOOTH CONNECTION

1. Power on the two PWR09, press the TWS button on both speakers to link two PWR09 speakers.
2. Search for “PWR09” on your device and connect. After successful connection, you can enjoy stereo sound.

TECHNICAL SPECIFICATIONS

system| 2-way active filter|
---|---|---
__range | <75m2|
woofer | 2 x 6.5” polypropylene cone|
speaker | 2 x 2” titanium driver with 0.52” VC|
bass reflex | yes|
amp power max. | 160W, class D|
sensitivity | 90dB|
frequency range | 60Hz-20KHz|
sources| stereo Bluetooth [TWS]| RCA stereo input
__| MIC input ¼” TRS| USB, Type A
wireless | Bluetooth 5.0|
battery with LED-indication | 2 x 4500 mAh (up to 8 hour)|
weight/piece | 12kg|
composition | ABS plastic|
colour | Black|
dim. (hxwxd) | 675 x 328 x 320mm|
accessoires| remote control|

WARRANTY CONDITIONS

2 year warranty from date of purchase. The warranty is limited to the repair of replacement of the defective material insofar as this defect is a result of normal use and the device has not been damaged. Artsound is not responsible for any other costs that ensue as a result of the defect (e.g. transport). For details, please consult our general terms and conditions of sale.

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment.For further information, please contact your local or regional authorities.
I, House Of Music NV, hereby declare that the type of radio equipment ARTSOUND complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity can be found at the following internet address: http://www.artsound.be/en/support/downloads
Disclaimer: All trademarks are the property of their respective owners. All specifications and information are subject to change without further notice. Slight variations and differences might appear between printed photos and actual products due to product enhancement.
House Of Music NV – Schoonboeke 10 B-9600 Ronse – Belgium

• House of Music NV, Schoonboeke 10, BE-9600 Ronse
• www.artsound.be artsoundaudio art sound.audio

References

• Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>