amazon basics B07X4H9RRG Heavy Duty Staple Gun User Manual
- June 15, 2024
- amazon basics
Table of Contents
Heavy Duty Staple Gun – 6 – 14mm
BO7X4H9ORRG
IMPORTANT SAFEGUARDS
Do not discard the safety instructions; give them to the operators. For multiple hazards, read and understand the safety instructions before installing, operating, repairing, maintaining, changing accessories on, or working near the product. Failure to do so can result in serious bodily injury.
CAUTION Risk of injury!
- Do not overreach. Maintain a balanced body position and secure footing.
- Wear appropriate personal protective equipment (PPE) as required by OSHA regulations.
- Alway wear impact-resistant eye protection during operation of the tool. The grade of protection required should be assessed for each use.
- Use of the product can expose the operator’s hands to hazards, including puncture, impacts, cuts and abrasions. Wear suitable gloves to protect hands.
- Do not modify this product. Modifications can reduce the effectiveness of safety measures and increase the risks to the operator.
- Do not use the product if it has been damaged.
- Ensure that the workpiece is securely fixed. Be aware that failure of the workpiece or accessories, or even of the ejected staple can generate high-velocity projectiles.
- The risks to others should also be assessed at this time.
- Hold the product correctly; be ready to counteract normal or sudden movements and have both hands available.
- Avoid unsuitable postures as it is likely for these positions not to allow counteracting of normal or unexpected movement of the product.
- While using the product, the operator should adopt a comfortable posture whilst maintaining a secure footing and avoiding awkward or off-balance postures. The operator should change posture during extended tasks; this can help avoid discomfort and fatigue.
- Use only sizes and types of accessories and consumables that are recommended by the manufacturer of the product; do not use other types or sizes of accessories or consumables.
- Proceed with care in unfamiliar surroundings. There can be hidden hazards, such as electricity or other utility lines.
- The product is not intended for use in potentially explosive atmospheres and is not insulated against contact with electric power.
- Ensure that there are no electrical cables, gas pipes, etc., which can cause a hazard if damaged by use of the product.
- Keep out of reach of children.
Before First Use
DANGER Risk of suffocation!
-
Keep any packaging materials away from children
— these materials are a potential source of danger, e.g. suffocation. -
Check the product for transport damages.
-
Remove all the packing materials.
Intended Use
- This product is intended for fastening insulation, house wrap, roofing, wiring, carpeting, upholstery, hobby and craft materials.
- This product is suitable for woods of the such as pine, poplar, plywood, fir, cedar, white woods, and other soft woods.
- This product is intended for private use only. It is not intended for commercial use.
- No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.
Product Description
A Trigger
B 8 mmStaples (x500)
C Safety lock
D Loading latch
E Bottom channel
F Staple releasing area
Operation
5.1 Operating the safety lock
WARNING Risk of injury !
Remove all staples from the product before locking.
5.2 Loading the staples
NOTICE Load the staples (B) with the staple leg(s) pointing up.
5.3 Operating the product
CAUTION Risk of injury!
- Do not place hands or body parts near the staple releasing area (F) to avoid injuries.
Press firmly on trigger (A) down onto a flat level surface.
Repeat as required.
5.4 Releasing a jammed staple
Cleaning and Maintenance
6.1Cleaning
- To clean the product, wipe with a soft, slightly moist cloth.
- Never use solvents, corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
6.2 Storage
- Avoid any vibrations and shocks.
- Store in a cool and dry place away from children and pets, ideally in original packaging.
- Lock the trigger (A) with the safety lock (C) before storing.
Disposal
**** Dispose of the product according to local regulations. If in doubt, consult your local authorities.
Specifications
| Net weight | approx. 1.8 lbs (822 g) |
|---|---|
| Dimensions (WxHxD) | approx. 7.1 x 4.3 x 1″ (18 x 11 x 2.5 cm) |
| Heavy duty | W: 27/64″, 7/16″ |
(10.6 mm, 11.3 mm)
H: 1/4″ 3/8″ 1/2″ 9/16″ (6 mm,
10 mm, 12 mm,14 mm)
D: 3/64″ (1.2 mm)
8.1 Importer Information
| For EU
---|---
Postal:| Amazon EU S.a r.l., 38 avenue John F. Kennedy, L-1855 Luxembourg
Business Reg.:| 134248
| For UK
Postal:| Amazon EU SARL, UK Branch, 1 Principal Place, Worship St, London
EC2A 2FA, United Kingdom
Business Reg.:| BRO17427
Feedback and Help
Love it? Hate it? Let us know with a customer review.
Amazon Basics is committed to delivering customer-driven products that live up
to your high standards. We encourage you to write a review sharing your
experiences with the product.
US: amazon.com/review/review-your-purchases#
UK: amazon.co.uk/review/review-your-purchases#
US: amazon.com/gp/help/customer/contact-
us
UK: amazon.co.uk/gp/help/customer/contact-
us
amazon.com/AmazonBasics
MADE IN CHINA
FABRIQUE EN CHINE
HERGESTELLT IN CHINA
PRODOTTO IN CINA
HECHO EN CHINA
GEMAAKT IN CHINA
WYPRODUKOWANO W CHINACH
TILLVERKAD | KINA
V04-06/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>