eyakult Widespread Bathroom Faucets Installation Guide
- June 17, 2024
- eyakult
Table of Contents
eyakult Widespread Bathroom Faucets
Product Information
The Two Handle Widespread Faucet is a high-quality faucet designed for use
in kitchens and bathrooms. It features a durable construction and a stylish
design that will complement any decor. The faucet is equipped with two
handles, one for cold water and one for hot water, allowing for precise
control of water temperature. The faucet also includes a spout with a gasket,
end valves with gaskets, and quick connect connections for easy installation.
With its reliable performance and easy operation, this faucet is the perfect
choice for any home
Specifications
- Product Type: Two-Handle Widespread Faucet
- Material: High-quality metal
- Finish: Chrome
- Installation Type: Deck mount
- Number of Handles: 2
- Handle Type: Lever
- Valve Type: Ceramic Disc
- Spout Height: 5 inches
- Spout Reach: 6 inches
Product Usage Instructions
Step 1: Shut off water supplies and remove the old faucet
Before installing the new faucet, make sure to shut off the water supplies
to avoid any leaks. Remove the old faucet by disconnecting the supply lines
and unscrewing it from the sink.
Step 2: Install the spout
Place the spout with the gasket through the mounting hole in the sink.
Secure the spout with the gasket and nut provided.
Step 3: Install the end valves
Slide the cold end valve with the gasket through the sink mounting hole on
the left. Secure the end valve with the washer and threaded bracket on the
shank. Lock the bracket by tightening the screws. Repeat the same steps for
the hot water side on the right.
Step 4: Connect the quick connects
Align the connections as shown and push the quick connects firmly upward. Pull
down moderately to ensure that each connection has been properly made. Note
that the handle with the blue index is for cold water and the handle with the
red index is for hot water.
Step 5: Connect the supply lines
Connect the inlet tubes with the supply lines. Make sure to connect them to
the corresponding valves (cold water to cold water valve, hot water to hot
water valve). Once connected, turn on the valves to allow water flow.
Step 6: Flush the faucet
Remove the aerator from the faucet and turn it on. Let the water run for
one minute to flush out any debris that may be present in the new faucet.
FAQ
Q: How do I clean and maintain the faucet?
A: To clean the faucet, simply wipe it with a soft cloth and mild soap.
Avoid using abrasive cleaners or scrubbing pads as they may damage the finish.
Regular maintenance includes checking for leaks, tightening any loose
connections, and ensuring proper water flow.
Q: Can I install this faucet on my own?
A: Yes, this faucet is designed for easy installation. However, if you are
not familiar with plumbing tasks, it is recommended to hire a professional
plumber for installation to ensure proper setup and prevent any leaks.
Q: Can I use this faucet with a water filter?
A: Yes, you can connect a water filter to this faucet. Simply attach the
filter to the end of the spout or use a separate adapter to connect it to the
faucet.
for Two Handle Widespread Faucet
Tools you will need
INSTALLATION
-
Shut off water supplies. Remove the old faucet.
-
Place the spout with a gasket through the mounting hole in sink. Secure spout with gasket and nut.
-
Slide cold end valves with gaskets through sink mounting hole on the left. Secure end valve with washers and threaded bracket on shank. Lock bracket by tightening the screws.
Note : handle with BLUE index is for Cold water and RED index is for Hot water. -
Proceed the same steps on the left for HOT WATER SIIDE. Align connection as shown and push quick connects firmly upward. Pull down moderately to ensure each connection has been made.
-
Connect the inlets tubes with supply lines, connect to the valves and turn them on.
-
Remove aerator, turn faucet on and let the water run for one minute to flush any debris.
Contact US : mikechen@eyakult.com (USA) zhongly@eyakult.com (Canada)