tp-link POE160S Omada PoE Injector Installation Guide

: June 17, 2024
: tp-link

Table of Contents

POE160S Omada PoE Injector
Product Usage Instructions
Connection
Specifications
Safety Information
FAQ
FCC compliance information statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

POE160S Omada PoE Injector

Specifications

Standards: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at IEEE 802.3bt (Only for POE170S/POE380S) IEEE 802.3bz (Only for POE260S/POE380S) IEEE 802.3an (Only forPOE380S)
LED: POE160S/POE260S: PWR POE170S/POE380S: PWR, PoE
Cable Type Interfaces:
- 10Base-T/100Base-TX: UTP category 5 cable or above (max. 100 m)
- 1000Base-T/2.5GBase-T: UTP category 5e cable or above (max. 100 m)
- 5GBase-T: UTP category 5e cable or above (max. 100 m)(Only for POE380S)
- 10GBase-T: UTP category 6a cable or above (max. 90 m)(Only for POE380S)
Maximum Power Supply: POE160S/POE260S: 30 W POE170S: 60 W POE380S: 90 W
Wall Mountable: Yes
Distance Between: POE160S/POE260S: 115.7 mm (Vertical), 37.7 mm (Horizontal) Mounting Holes POE170S/POE380S: 102 mm (Vertical)
Operating Temperature: 10% to 90% RH non-condensing
Storage Temperature: 5% to 90% RH non-condensing

Product Usage Instructions

Connection
The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP, and PoE IP Phone through an Ethernet cable.

LED Explanation
For POE160S/POE260S:

PWR Off: Power off
Steady Yellow: Power on, no PoE power supply
Steady Green : Power on, normal PoE power supply
Flashing Green : Abnormal PoE power supply

For POE170S/POE380S

PWR
- On: Power on
- Off: Power of
PoE
- On: Normal PoE power supply
- Off: No powered device connected
- Flashing: Abnormal PoE power supply

Note: For simplicity, we will take POE160S for example in this Guide

Connection

Note:

The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP, and PoE IP Phone through an Ethernet cable.
For POE170S/POE380S, plug the product into the wall outlets with an earthing connection through the power supply cord.

Specifications

Environmental and Physical Specifications

Safety Information

Keep the device away from water, fire, humidity, or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
The plug on the power supply cord is used as the disconnect device, the socket-outlet shall be easily accessible.
Plug the product into the wall outlets with an earthing connection through the power supply cord.
The PoE ports shall not be used to charge lithium batteries or devices supplied by lithium batteries.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

FAQ

Q1. Can the PoE injector supply power to a PoE device that doesn’t have a gigabit PoE port?
- A: Yes. All RJ45 ports of the PoE injector support 10/100/1000 Mbps.
Q2. What can I do if my PoE injector doesn’t supply power to the powered device or the supplied power is unstable?
- A1: Ensure the PD is PoE-compliant and its connecting port supports the PoE function.
- A2: Ensure the power consumption of the PD doesn’t exceed the maximum power supply of the PoE injector, otherwise the overload protection of the PoE injector will be activated. The quality and length of the Ethernet cable may influence the reception of the power supply.

QR SCAN

To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP- LinkCommunity.
For technical support and other information, please visit https://www.tp- link.com/support, or simply scan the QR code.

TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce.
TP-Link hereby declares that the device complies with the essential requirements and other relevant provisions of the Electromagnetic Compatibility
Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

FCC compliance information statement

Product Name: PoE Injector
Model Number: POE160S/POE170S/POE260S/POE380S
Responsible party: TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: https://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class A digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

CE Mark Warning

Industry Canada Statement
CAN ICES-3 (A)/NMB-3(A)

Canadian Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic
Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Explanation of the symbols on the product label
The Equipment marking is at the bottom of the device. Symbols may vary from product.

Wall Mounting Requirements (for POE170S/POE380S)
To mount the device on a wall, use 2 screws which comply with ANSI B1.1 4#. (5#), 6# standard and are more than 7 mm in length. When the screws are fixed on the wall, the distance between the screw head and the wall should be more than 1.5 mm.