XTOOL D1.2.1 Inline Duct Fan User Manual

XTOOL D1.2.1 Inline Duct Fan

Safety first (important)

• xTool inline duct fan is applicable to desktop laser processing devices. Please strictly follow the safety precautions and instructions for the laser device.
• xTool inline duct fan is designed to exhaust smoke instead of purifying air. Ensure that the smoke is discharged properly without causing harm to human health or the environment.
• Do not place the inline duct fan near the window. It may be damaged by rain and even cause electric leakage.
• Do not disassemble the device or change its structure in any way without authorization. In particular, do not expose the fan blades outside. Accidental contact with the rotating blades may cause injury.
• Do not put your hands or any other objects, such as a pencil, inside the device when the fan is running. It may cause injury and device damage.
• Do not disassemble, repair, or rectify the device when the fan is running. It may cause electric shock and other injuries.
• Cut off the power supply before moving the inline duct fan.
• Cut off the power supply before cleaning the inline duct fan.
• If the device is not used for a long time, unplug the power cable from the socket.
• To unplug the power cable, pull the plug instead of the cable. Pulling the cable may damage the cable and cause electric leakage and electric shock.
• Do not drag, kink, pinch, or flatten the power cable. It may damage the power cable.
• Do not use a damaged power cable or replace the original power cable without authorization. It may cause electric leakage, electric shock, and fire hazards.
• If the power cable is damaged, contact us for support or a qualified electrician to replace the power cable.

List of items

• Inline duct fan

• Smoke exhaust pipe

• Ribbed plastic anchors

• Pipe clamp A

• Screws

• Flange

• Pipe clamp A

• Pipe clamp B

• User manual
  
  xTool Inline Duct Fan User Manual

Meet xTool inline duct fan

1. Flange
2. Inline duct fan
3. Pipe clamp A
4. Smoke exhaust pipe
5. Power cable
6. Knob

Assemble xTool inline duct fan

• Tighten the pipe clamp

• Loosen the pipe clamp

Tighten the pipe clamp

Loosen the pipe clamp

Use xTool inline duct fan

Turn the knob to adjust the fan speed. The higher the fan speed, the more efficiently the smoke is exhausted

Maintenance

If the exhaust rate decreases, it may be that an excess of dust accumulates on the fan. Take apart the inline duct fan, and clean it with a dampened cloth.

After-sales services

For technical support, contact us at support@xtool.com.
For more information about after-sales services, visit support.xtool.com.

Statement

Thank you for choosing xTool products!
If you use the product for the first time, read carefully all the accompanying materials of the product to improve your experience with it. If you do not use the product according to the instructions and requirements of the Manual, or mis-operate the product due to misunderstanding, etc., the Company shall bear no responsibility for any loss resulting therefrom.
The Company has collated the content of the Manual rigorously and carefully, but errors or omissions may remain.
The Company is committed to continuously improving product functions and service quality, and therefore reserves the right to change any product or software described in the Manual and the content of the Manual at any time.
The Manual is intended to help you use the product properly and does not include any description of hardware and software configuration. For product configuration, refer to the related contract (if any) and packing list, or consult your distributor. Images in the Manual are for reference only and the actual product may vary.
Protected by copyright laws and regulations, the Manual shall not be reproduced or transcribed in any way, or be transmitted on any wired or wireless network in any manner, or be translated into any language, or be modified in any way, such as content, image, or layout modification, without the prior written authorization of the Company.
The Company is committed to continuously improving the product and related materials. The product and the Manual are subject to change, and updates can be found at xtool.com.

Declaration of conformity

Hereby, Make black Co.,Ltd ., declares that this product is in compliance with the Essential requirement s and other relevent provision of the RoHS directive 2011/65/EU & (EU) 2015/863

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC radiation exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Appendix: (Optional) Fix the inline duct fan

To fix the inline duct fan in a place, you can fasten its base with screws before installing the smoke exhaust pipe.

The following tools are not included in the pack

To better secure the screws, you can hammer the ribbed plastic anchors into the holes before applying the screws.

References

• xTool Support Center
• xTool Laser | Smart Desktop Laser Cutter and Engraver

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>