beko RHO8123T Oil Filled Heater User Manual

: June 17, 2024
: Beko

Table of Contents

RHO8123T Oil Filled Heater
Meanings of the symbols
Important safeguards
Part figure
Assembly instructions
Operation
Others
Read User Manual Online (PDF format)
Download This Manual (PDF format)

beko RHO8123T Oil Filled Heater Oil filled heater
User manual

RHO8123T Oil Filled Heater

RHO8122T | RHO8123T
This product is only suitable for well insulated spaces or occasional use.
Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of- the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow all warnings and information in the user manual.

Meanings of the symbols

Following symbols are used in the various section of this manual:

| Important information or useful hints about usage.
---|---
| Warning for hazardous situations with regard to life and property.
| Warning to actions that must never perform.
| Warning for electric shock.
| Warning for danger of fire.
| Warning for hot surfaces.
****| Do not cover it.

This product has been produced in environmentally friendly, modern facilities
Complies with the WEEE Regulation
**** Does not contain PCB,

Important safeguards

When using any electrical appliance, basic precautions should always be followed ta reduce the risk of fire, electrical shock and injury to persons,, including the following:
Read allinstructions before using heater.
This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9m) from the heater. Allow heater to cool before moving
and then use the built-in handle for easy movement.
Extreme caution is necessary when heater is used by or near children and whenever heater is left unattended.
Always unplug the heater when itis not in use.
Do not operate any heater with a damaged cord or plug, or after the heater malfunctions, or has been dropped or damaged in any manner. Return heater to the manufacturer for examination, electrical or mechanical adjustment, or repair.
Do not use heater outdoors. This product is intended for normal household indoor use only.
This heater is not intended for use in bathrooms, laundry areas or similar maist indoor locations. Never locate heater where it may fallinto a bathtub or other water container.
Do not run power cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic areas and where it will not be tripped over.
Todisconnect heater, set controls to Off, then remove plug from outlet.
Keep this heater clean. Do not allow foreign objects to enter any ventilation or exhaust opening as this may cause electric shock, or fire, or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust inany manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
A heater has hot and arcing or sparking parts inside. Do not use itin areas where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, orinjury to persons.
Warning: In order to avoid overheating, do not cover the heater.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
The heater must not be located immediately below a socket- outlet.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in asafe way and understand the hazards invalved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Correct disposal of this product
**** This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device mustbereturned to official collection point for recycling of electrical and electronic devices. Tofind these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role inrecovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.
This heater s filled with a precise quantity of special oil. Repairs requiring opening of oil-container are only to be made by the manufacturer or his service agent who should be contacted if there is an oil leak. When scrapping the heater, follow the regulations concerning the disposal of oil.
(hildren of less than 3 years should be kept away unless continuously supervised. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position
and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, requlate and clean the appliance or perform user maintenance.

Warning: Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
Warning: In order to avoid overheating, do not cover the heater.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a personresponsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not use this heater if it has been dropped;
Do not use if there are visible signs of damage to the heater;
Use this heater on a horizontal and stable surface.
Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
Do not use the heater ingreen house and building sites.
If you are not using the heater, switch off and plug out.

Part figure

beko RHO8123T Oil Filled Heater - parts

1. Control panel
2. Display screen
3. Control knob
4. Power switch
5. Airinlet| 6. Thermovent
7. Cordwrap
8. Wheel assembly
9. Rear cover
10. Radiators
---|---

Assembly instructions

Unpack your heater and find the wheel-holding plate and butterfly nuts between the fins assemblies.

Make sure the heater is unplugged and in the “Off” position.
Turn the heater upside down.
Attach the wheel-holding plates onto the heater as Fig.1 shows. The U plate is fixed between the last tow fins and the other one s fixed under metal control box.
Fix the castors to the vertical axis of both the wheel holding plates.
Insert the butterfly nuts and tighten them securely.
Turn the heater upright.

Your heater is nowready to use. Warning: Risk of fire. Do not operate heater without wheel assemblies attached.
Operate heater in upright position anly (wheels on bottom, controls on top). Any other A position could create a hazardous situation. Ensure that the surface beneath the heater is clean and free of any obstructions. It is not recommended that this heater be placed on high-pile carpeting or any other surface that impedes the flow of air underneath the heater.

Operation

Power on the heater, press the Power switch at the lower side to On position, the power indicator lights on and buzzer makes sound to enter into the standby mode. beko RHO8123T Oil Filled Heater - overview [On/0ff] Under Standby mode, press the **knob (orremote controller & button), the heater enters into the Normal mode, works with highest power, and automatically set the temperature at 35°C, or recover to the state of the last standby state (Note: when the power is not cut off). Repeatedly press the knob untill the heater recovers to the Standby state.
[Mode Switch]
Under Working State, press the button M, the heater switches between Low — Middle– High–Fast-Heating Mode — Energy Saving Mode — Anti-Freezing Mode — Low. Orrepeatedly press the remote controfler button to switch between Normal Mode — Fast-Heating Mode — Energy SavingMode — Anti-Freezing Mode — Normal Mode.
[Level Switch]
Under Working State, press the button M, the heater switches between Low – Middle– High – Fast-Heating Mode — Energy SavingMode — Anti-Freezing Mode — Low. Or under normal mode, repeatedly press the remote controller button to switch between High (orange) — Middle (red) — Low (green) — High (orange).
[Temperature setting]
Under Normal mode, press the 8 button to check the current setting temperature, and the temperature icon flashes. Turn the knob to adjust the setting temperature, it will automatically exit the enquiry setting interface if it is not operated within 3s, and display the setting temperature.
[Timing On]
Under Off state, press the button (or remote controller button) to enter into the timing enquiry interface, the setting time and timing icon flashed, turn the knab to adjust the setting time, it will automatically exit the enquiry setting interface if it is not operated within 3s. When the setting is 0, it cancels Timing On.
After reaching the Timing On time, the heater automatically turns on and works at the last standby state. The time setting range is 0-24H, the adjustment unit in hour.
[Timing Off]
Under On state, press the button (or remote controller button) to enter into the timing enquiry interface, turn the knob to adjust the setting time, it will automatically exit the enquiry setting interface if itis not operated within 3s. When the setting is 0, it cancels Timing Off. After reaching the Timing Off time, the heater automatically enters into the standby state and stops work. The time setting range is 0-24H, the adjustment unit in hour.
[Remote ]
When working mode is o, press the button on control panel, press to adjust temperature within 5°C to 35°C. Press the button on remote controller, press to adjust time within 0 to 24 hours.
[Introduction on mode]
Normal mode under this mode, the heater works at the setting level, after reaching the setting temperature, it stops heating and the setting temperature flashes.
Energy saving mode ECO: under this mode, the heater works normally, the level and setting temperature are not adjustable, the heater works at default setting temperature (22°C). (In Energy saving mode, if the setting temperature flashes, it means the heater is under energy saving heat preservation work state). The indicator light circle indicates green.
Anti-Freezing mode : under this mode, press the knob to adjust the level, but the setting temperature is not adjustable, the heater works at default anti- freezing temperature (5°C). (In AntiFreezing mode, if the setting temperature flashes, it means the heater is under anti-freezing heat preservation work state). Theindicator light circle indicates red.
[Memory Function]**
When the power of the heater is not cut off or the heater keeps under Standby mode, it can memorize the last working mode and setting temperature and works at the setting temperature after turning on, the memary data will be reset if the power supply of the heater is cut off, and the setting temperature of the heater recovers to the default setting (Normal mode, high, setting temperature is 35°C) when turning on.

Inserting batteries

Press down on the battery compartment cover and slide it out.
Insert the batteries, making sure that the positive terminals are facing the proper direction marked inside the battery compartment.
Close the cover by sliding it in.

Note:

Use 2″AAA” batteries (not included).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-line) or rechargeable (nickel-cadmium) batteries.
Remove the batteries from remote if is to be left unused for along period of time.

beko RHO8123T Oil Filled Heater - overview 1 Warning: This heater includes a thermal cut-off that shuts the heater off if it overheats due to abnormal conditions. If this occurs, turn the heater “off”, unplug it, and inspect and remove any objects on or adjacent to the heater. Allow it to cool fora few minutes, and then plugit back in and resume normal operation.

Others

5.1 Saftey features
Thermal cut-off: This heater includes a thermal cut-off that shuts the heater off if it overheats due to abnormal conditions. If this occurs, turn the heater off, unplugit, and inspect and remove any objects on or adjacent to the heater. Allow it to cool for a few minutes, and then plug it back in and resume normal operation.
Tip-over switch: This heater includes a safety tip-over protection feature that will shut the heater off incase it is tipped over.If, at any time, the heater tips over, please put the heater back in the upright position. The heater will resume its normal operation.
5.2 Cleaning and maintenance instruction

The electric heater should be cleaned regularly to wipe out the dust on the surface of flanges. As this may influence the radiating efficiency.
Disconnect electricity supply and allow radiator to cool, wipe out dust with a soft damp cloth. Do not use detergent or abrasives.
Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint coat.

5.3 Main technology specifications
Power supply: AC220-240V ~ 50Hz

Model	Power regulation range (w)
Lo	Med
RH08122T	800
RH08123T	1000

Manufactured by Arcelik A.S. Karaagac Cd. No:2-6 34445 Sutluce, Beyoglu, Istanbul, Turkey

*All performance parameters in the table above were measured before delivery and are for reference only.

Table 2
Information requirements for electric local space heaters

Model identifier(s): RHO8122T

Item………………………………………….. Symbol	Value	Unit	Item……………………….. Unit
Heat output		Tpye of heat input, for electric storage local space heaters

only (select one)
Nominal heat output| Pmin| 1.4| kW| | manual heat charge control, with integrated thermostat| [no]
Minimum heat output
(indicative)| Pmin| 0.8| kW| | manual heat charge control with room and/or outdoor temperature feedback| [no]
Maximum continuous
heat output| Pmate| 1.4| kW| | electronic heat charge control with room and/or outdoor temperature feedback| [no]
Auxiliary electricity consumption| | fan assisted heat output| [no]
At nominal heat output| elmax| 1.391| kW| | Type of heat output/room temperature control (select one)
At minimum heat output| elmin| 0.771| kW| | single stage heat output and no room temperature control| [no]
In standby mode| elmin| 0.001| kW| | Two or more manual stages, no room temperature control| [no]
| | | | | with mechanic thermostat room temperature control| [no]
| | | | | with electronic room temperature control| [yes]
| | | | | electronic room temperature control plus day timer| [no]
| | | | | electronic room temperature control plus week timer| [no]
| | | | | Other control options (multiple selections possible)
| | | | | room temperature control, with presence detection| [no]
| | | | | room temperature control, with open window detection| [no]
| | | | | with distance control option| [no]
| | | | | with adaptive start control| [no]
| | | | | with working time limitation| [no]
| | | | | with black bulb sensor| [no]
Contact details| ArcelikAS.
Karaagac Caddesi No:2-6,34445,
Sutlice, Istanbul, Turkey

*Electricity consumption in standby mode is 0.632W
The seasonal space heating energy efficiency of all local space heaters except commercial local space heaters, 115(%)…………. 36.8%

Table 2
Information requirements for electric local space heaters