Perma 2691 Indoor Outdoor Ultimate Retractable Baby Gate Instruction Manual
- June 17, 2024
- Perma
Table of Contents
Ultimate
Retractable Gate
INSTRUCTION MANUAL
2691 Indoor Outdoor Ultimate Retractable Baby Gate
White #2691 Black #2692 Grey #2693
IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE
REFERENCE.
This product complies with safety standard ASTM F1004-21 / EN 1930:2011
SAFETY INFORMATION
GENERAL
Read this instruction manual carefully and keep it in a safe place for future
reference.
The correct use and maintenance of this product is essential.
MAINTENANCE
Regularly check that the gate is functioning correctly, lubricate hinges and
moving components. Tighten and adjust mounts to ensure secure smooth
operation. Inspect all components regularly and stop using if any component is
damaged or missing.
Refer to pages 16 & 17 for operation and cleaning instructions.
WARNING
- To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer instructions.
- Incorrect installation can be dangerous.
- Danger to older children if climbing over the product.
- Discontinue the use of the safety barrier if it becomes damaged, broken or disassembled.
- The safety barrier must not be fitted across windows.
- Never install this product on glass doors. Install this product against reliable doors or walls.
- If the safety barrier is used at the top of the stairs, it should not be positioned below the top level.
- The minimum distance to the first step of the stairs is 25cm (10”) when used at the top of stairs.
- If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible.
- This safety barrier is for domestic use only.
- This safety barrier has a manual closing system.
- Do not use the safety barrier if any components are damaged or missing.
- Children have died or been seriously injured when gates / enclosures are not securely installed.
- Always check that the safety barrier is correctly closed.
- Use only with the locking / latching mechanism securely engaged.
- Gate must be installed as close to the ground as possible, as per the installation guides.
- Never use with a child able to climb over or dislodge / open the gate or enclosure.
- Regularly check that the safety barrier is properly installed and secure.
- ALWAYS install and use gates / enclosures as directed, using all required parts. All parts should be obtained from after sales support.
- Barrier must be fitted between rigid surfaces such as plaster board, timber or hard wall.
- This product is intended for use with children from 6 to 24 months or small to medium pets from 4.5kg (10 Ibs) up to 18kg (40 Ibs).
- Do not put any goods which can be grabbed by children or pets near this product to prevent injury.
- Before using this product, carefully inspect for any loose parts and whether any parts need to be tightened.
- NEVER use to keep child away from pool.
- Never leave child unattended when using this product.
- You MUST install mounting hardware to keep gate in place. Without mounting hardware, child can push out and escape.
MOUNTINGS
Gate must be installed in a structurally sound opening. Ensure mounting
surface (wall, door, stair posts, etc.) is strong, rigid and has an even
surface.
Note: If the safety barrier is used at the top of the stairs, it should not be
positioned below the top level. If the safety barrier is used at the bottom of
the stairs, it should be positioned at the front of the lowest tread possible.
This gate must only be fixed to a solid and secure surface. If unsure, check
with a qualified builder or trades person that the installation you intend is
suitable and safe within the chosen location.
TOOLS REQUIRED Select the
appropriate fixing method from the list below.
HARD WALL MOUNTING BRICK / CONCRETE
DRY WALL MOUNTING
Locate the wood stud and follow the wood mounting instructions. Do not mount
into dry wall without additional support.
WHAT’S IN THE BOX
PARTS
1 x Gate Mount Installation
Guide
1 x Catch Installation Guide
INSTALLATION
Gate Placement
Suitable placement of Gate and Catch Mount
Skirting or Baseboard
To help correct for the offset of the skirting board or baseboard, Spacers
will be required. Measure the width of your skirting / baseboard and use the
closest number of Spacers to fit this width. Each Spacer is 5mm (3/16”) thick.
Align Spacers and Mounts
in their correct position and use a phillips
screw driver to tighten Screws until each Mount is secure.
Additional Wall Spacers are available from after sales support.
Step 1.
Hold guides vertically and completely outstretched against mounting surface
with the end marked “FLOOR” even with the floor. Mark screw hole positions.
Remove templates. **NOTE: Leave
at least 20mm (3/4”) between Guide and the edge of the opening to ensure gate
won’t overhang edge.
Step 2.
Align the Upper & Lower Gate Mount on the side you want the gate to extend from. Tighten Screws until each Mount is secure.
Step 3.
Align the Catch Mounts in their correct position on the side you want the gate to extend.
Tighten Screws until each Mount is secure.
To Attach
Attach Gate Assembly to the Gate Mounts by aligning the gate directly above and sliding straight down over Mounts. The gate will lock in place with a “Click”.
Check that the Assembly is flush against the wall and is locked firmly in place. To Remove**
To remove gate from the Mounts, push and hold the release button while sliding the gate upwards.
OPERATION
HOW TO USE
-
Locked Position
Always return button to lock position after each use and before tensioning. -
Quick Unlock
Push & Twist to align with “the dot” icon then release. Pull handle in one fluid movement as stopping will engage lock. -
Full Unlock
Twist button to align with the “unlocked” icon, this will unlock the gate to freely open and close. -
Handle
Pull the handle until pin is aligned with top catch, press handle button engage both catches and release.
Note: Return button back to locked position after use.
NOTE: When gate is retracting always hold the handle and guide the gate
evenly back into its original position.
Never let go of the handle when gate is retracting.
QUICK RELEASE
- PRESS + HOLD BUTTON | 2. LIFT HANDLE TO RELEASE NOTE: ALWAYS PRESS BUTTON WHEN LOCKING GATE
HOW TO TIGHTEN
CLEANING INSTRUCTIONS
Simply use a soft damp cloth to wipe gate, dry after cleaning. Do not use chemical or abrasive cleaners.
SPARE PARTS
Scan the QR code to see Spare Parts or visit: permachildsafety.com
SUPPORT
WARRANTY CERTIFICATE
Congratulations! You have made an excellent choice of this quality product.
Our commitment to quality also includes our service. Should you, contrary to
expectations, experience defects due to manufacturing faults, we will provide
you with a warranty against defects as follows:
WARRANTY
The product is guaranteed to be free from defects in workmanship and parts for
a period of 12 months from the date of purchase. Defects that occur within
this warranty period, under normal use and care, will be repaired, replaced or
refunded at our discretion. The benefits conferred by this warranty are in
addition to all rights and remedies in respect of the product that the
consumer has under the Competition and Consumer Act 2010 and similar state and
territory laws. Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and for compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
PROOF OF PURCHASE
This warranty is valid for the original purchase and is not transferable.
Please keep your purchase docket, tax invoice or receipt as proof of purchase
and date of which the purchase was made.
EXTENT OF WARRANTY
This warranty is limited to defects in workmanship or parts. All defective
products or parts will be repaired or replaced. This warranty does not cover
consumable items.
NORMAL WEAR AND TEAR
This warranty does not cover normal wear and tear to the products or parts.
EXCLUSIONS
This warranty does not cover:
- Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorised modification, loss of parts, tampering or attempted repair by a person not authorised by the distributor.
- Any product that has not been installed operated or maintained in accordance with the manufacturer operating instructions provided with the product.
- Any product that has been used for purposes other than domestic use.
TO MAKE A CLAIM
If a defect in the goods appears within 12 months, you are entitled to claim a
warranty. Please contact after sales support via the link below:
www.permachildsafety.com/contact-us
Please ensure that you have a copy of proof of purchase so that we are able to
respond as quickly and efficiently as possible.
SUPPORT
WARRANTY CARD
DETAILS:
PRODUCT NAME: Ultimate Retractable Gate
PRODUCT NUMBER: White 2691 / Black 2692 / Grey 2693
YOUR NAME:
ADDRESS:
PHONE:
EMAIL:
DATE OF PURCHASE:
LOCATION OF PURCHASE:
We recommend that you keep a copy of your receipt, showing the date of
purchase, with this warranty certificate and keep for your reference. In the
event of a product fault, please contact after sales support. Ensure that you
include the product details (as shown on this card) so that we are able to
respond as quickly and efficiently as possible.
AFTER HOURS SUPPORT
Scan the QR code for Live Chat Support or visit: permachildsafety.com /contact-us
Scan the QR code for Live Chat Support or visit:
permachildsafety.com/contact-us
Perma Child Safety
@permachildsafety https://qrstud.io/xad09c0
Documents / Resources
|
Perma 2691 Indoor Outdoor Ultimate Retractable Baby
Gate
[pdf] Instruction Manual
2691 Indoor Outdoor Ultimate Retractable Baby Gate, 2691, Indoor Outdoor
Ultimate Retractable Baby Gate, Ultimate Retractable Baby Gate, Retractable
Baby Gate, Baby Gate
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>