CAMDEN DOOR CONTROLS CM-1100 Cast Aluminum Key Switches Installation Guide

June 13, 2024
CAMDEN DOOR CONTROLS

Door Activation Devices
CM-1100 & 2000 Series
Cast Aluminum Key Switches
INSTALLATION INSTRUCTIONSCAMDEN DOOR CONTROLS CM-1100 Cast Aluminum Key
Switches

PACKAGE CONTENTS

(1) Heavy duty 1/4″ thick aluminum faceplate
(2) Tamper proof screws and driver
(1) Color coded 18 AWG soldered leads
(1) Weatherproof gasket (CM-2200 Series only)
(1) Lock ring
Note: Mortise Cylinder Sold Separately

GENERAL DESCRIPTION

Camden key switches are designed to work with most 1”, 1 1/8” or 1 1/4” mortise cylinders, and with different types of cams.
One or two switches may be installed, either momentary and/or maintained (alternating on/off).

SPECIFICATIONS

Input Voltage 12-24V AC/DC
Contact Rating 6A @ 30VDC (Standard), 15A @ 30VDC (Optional)
Switch Life 100,000 cycles
Temp Range 32°F – 85°F (0°C to +85°C)
Standard Finish Brushed aluminum
Dimensions CM-1100:

2 3/4″ W x 4 1/2″ H x 1.5″ D (70mm x 114mm x 38mm)
CM-2000:
1 3/4″ W x 4 1/2″ H x 1.5″ D (44mm x 114mm x 38mm)

INSTALLATION

  1. The switch (es) provided may be mounted in either the left or the right hole on the back of the faceplate. Thread the octagonal nut (spacer ring) on to the bushing (stem) of the switch before placing the switch in the hole.

  2. Insert the switch up through the bottom of the desired hole. Secure the switch in place by screwing the round threaded washer onto the top of the switch.

  3. Fit the mortise cylinder through the front of the face plate being sure to align the grooves on the sides of the cylinder with the corresponding “retainers” on the back of the face plate.

  4. Push firmly on the cylinder, until it snaps into place, lying flush in the front of the face plate (aluminum models only).
    Note that some cylinders may appear not to fit in the face plate. If the grooves on the side of the cylinder are irregular and do not align with the retainers on the back of the faceplate, use a metal file to file down the retainers slightly.
    Note – do not file the retainers off completely as they prevent the cylinder from spinning in the face plate.

  5. Thread the brass cylinder lock ring onto the back of the cylinder, and tighten in place.

  6. Turn the key in the cylinder, and ensure the cam hits the top of the switch squarely in the center. Adjust the switch in the slotted hole until the cam hits in the center. It does not affect operation of the cam if the cylinder rests against  the switch, so long as the switch is not fully depressed until activated by a turn of the key. If the cam does not depress the switch, or blocks the switch from resetting, raise or lower the octagon nut located under the switch, as needed. Extra spacers are provided and may be used as required.

  7. Once the electrical connections are completed (see fig 2), attach the unit to the switch box, wall, or receptacle box using the supplied tamperproof or stainless steel Phillips screws.
    For outdoor use, place the rubber weather proofing gasket behind the face plate prior to securing to the back box or wall.
    CAMDEN DOOR CONTROLS CM-1100 Cast Aluminum Key Switches -
connections

WIRING

WIRING LAYOUT & COLOR CODING


SWITCH
TYPE| 1
SPST
MOMENTARY
N.O. or N.C.| 2
SPST
MAINTAINED
N.O. or N.C.| 3
SPDT
MOMENTARY| 4
SPDT
MAINTAINED| 5
DPDT
MOMENTARY| 6
DPDT
MAINTAINED
COMMON| BLACK| BLACK| GREY| GREY| GREY (X2)| GREY (X2)
NORMALLY
OPEN| BLACK| BLACK| BLUE| ORANGE| BLUE (X2)| ORANGE (X2)
NORMALLY
CLOSED| BLACK| BLACK| ORANGE| ORANGE| ORANGE (X2)| ORANGE (X2)

SPST

Momentary: When the switch is pressed the current pole will change to the opposite state until released.
Maintained: When the switch is pressed it will provide the opposite pole until the button is pressed again

SPDT

Momentary: When the switch is pressed it will provide a change of state on the N.O. & N.C. poles until released
Maintained: When the switch is pressed it will provide a change of state on the N.O. & N.C. poles until button pressed again

DPDT

Momentary: When the switch is pressed it will provide a change of state on both of the N.O. & N.C. poles until released
Maintained: When the switch is pressed it will provide a change of state on both of the N.O. & N.C. poles until pressed again

OPTIONAL WIRING

Key Switches may be ordered with optional LED’s. These drawings show the various wiring configurations of the LED’s.

CAMDEN DOOR CONTROLS CM-1100 Cast Aluminum Key Switches -
WIRING

ORDERING INFORMATION FOR REPLACEMENT PARTS

CAMDEN DOOR CONTROLS CM-1100 Cast Aluminum Key Switches -
PARTS

NOTE:

  1. CM-1100 and CM-2000 Series with option to install one or two switches (SPST, SPDT or DPDT) either momentary and/or maintained. (Refer to switch options table)

CM-1100 SERIES PARTS KIT

CM-2000 SERIES PARTS KIT

ITEM
NUMBER| PART NUMBER| DESCRIPTION
---|---|---
1| A.CM-1100 SERIES| DIE-CAST ALUMINUM (SINGLE GANG) FACE PLATE
FOR FLUSH MOUNT KEY SWITCHES
60-41A001
B.CM-2000 SERIES| DIE-CAST ALUMINUM (MULLION) FACE PLATE
FOR FLUSH MOUNT KEY SWITCHES
PARTS KIT
ITEM
NUMBER| PART NUMBER| DESCRIPTION
2| CM-1100 SERIES| (A) 6-32 X 3/4 SNAKE EYE TAMPER PROOF SCREWS (SNAKE EYE)
(B) 6-32 X 314 FLAT HEAD PHILLIPS ZINC PLATED SCREWS
(C) CYLINDER LOCK RING
(D) KEY FOR TAMPER PROOF SCREWS (SNAKE EYE)
60-34B027
CM-2000 SERIES| (A) 6-32 X 3/4 SNAKE EYE TAMPER PROOF SCREWS (SNAKE EYE)
(B) 6-32 X 3/4 FLAT HEAD PHILLIPS ZINC PLATED SCREWS
(C) CYLINDER LOCK RING
(D) KEY FOR TAMPER PROOF SCREWS (SNAKE EYE)
(E) MULLION NEOPRENE GASKET
60-34B035

CM-1100 & CM-2000 SERIES KEY SWITCHES
INSTALLATION INSTRUCTIONS

SWITCH OPTIONS

ITEM
NUMBER| MODEL NUMBER| CITY| PART
NUMBER| DESCRIPTION
SINGLE
GANG| MULLION
| CM-1100| CM-2000| 1| 60-680046| SPST MOMENTARY CONTACT SWITCH. WO 6A ©125V AC. 3A@ 30V DC
CM-1105| CM-2005| 1| 60-680048| SPST MOMENTARY CONTACT SWITCH. WC 6A ©125V AC. 3A@ 30V DC
CM-1110| CM-2010| 1| 60-680049| SPST MAINTAINED CONTACT SWITCH, ON/OFF 6A ©125V AC. 3A@ 30V DC
CM-1120| CM-2020| 1| 60-680052| SPDT MOMENTARY CONTACT SWITCH. 6A ©125V AC. 3A@ 30V DC
CM-1130| CM-2030| 1| 60-680054| SPDT MAINTAINED CONTACT SWITCH, 6A ©125V AC. 3A@ 30V DC
CM-1150| CM-2050| 2| 60-680052| SPDT MOMENTARY CONTACT SWITCH. 6A ©125V AC. 3A0 30V DC
CM-1160| CM-2060| 2| 60-680054| SPDT MAINTAINED CONTACT SWITCH, 6A ©125V AC. 3A@ 30V DC
CM-1170| CM-2070| 1| 60-680052| SPDT MOMENTARY CONTACT SWITCH. 6A ©125VAC. 3A© 30V DC
1| 60-680054| SPDT MAINTAINED CONTACT SWITCH, 6A ©125V AC. 3A@ 30V DC
CM-1180| CM-2080| 1| 60-680053| DPDT MOMENTARY CONTACT SWITCH, 6A ©125V AC, 3A@ 30V DC
CM-1182| CM-2082| 2| 60-680053| DPDT MOMENTARY CONTACT SWITCH, 6A ©125V AC. 3A@ 30V DC
CM-1190| CM-2090| 1| 60-680055| DPDT MAINTAINED CONTACT SWITCH. 6A ©125VAC, 3A@ 30V DC
CM-1192| CM-2092| 2| 60-680055| DPDT MAINTAINED CONTACT SWITCH. 6A ©125VAC. 3A@ 30V DC
| SINGLE LED OPTIONS| DOUBLE LED OPTIONS
ITEM NUMBER| MODEL
NUMBER| On| PART
NUMBER| DESCRIPTION| MODEL
NUMBER| QTY| PART
NUMBER| DESCRIPTION
4| CM-XXXX-7012| 1| 60-73C006| RED 12V LED| CM-XXXX-70122| 2| 60-73C006| RED 12V LEDS
CM-XXXX-7024| 1| 60-73C010| RED 24V LED| CM-XXXX-70242| 2| 60-73C010| RED 24V LEDS
CM-XXXX-7112| 1| 60-73C009| GREEN 12V LED| CM-XXXX-71122| 2| 60-73C009| GREEN 12V LEDS
CM-XXXX-7124| 1| 60-73C011| GREEN 24V LED| CM-XXXX-71242| 2| 60-73C011| GREEN 24V LEDS
CM-XXXX-7212| 1| 60-73C009| GREEN 12V LED| CM-XXXX-72122| 2| 60-73C009| GREEN 12V LEDS
1| 60-73C008| RED 12V LED| 2| 60-73C008| RED 12V LEDS
CM-XXXX-7224| 1| 60-73C011| GREEN 24V LED| CM-XXXX-72242| 2| 60-73C011| GREEN 24V LEDS
1| 60-73C010| RED 24V LED| 2| 60-73C010| RED 24V LEDS
CM-XXXX-7412| 1| 60-73C014| AMBER 12V LED| CM-XXXX-74122| 2| 60-73C014| AMBER 12V LEDS
CM-XXXX-7424| 1| 60-73C012| AMBER 24V LED| CM-XXXX-74242| 2| 60-73C012| AMBER 24V LEDS
CM-XXXX-7612| 1| 60-668001-12| BI-COLOR 12V
(3 WIRE) LED| CM-XXXX-76122| 2| 60-668001-12| BI-COLOR 12V (3 WIRE) LED
CM-XXXX-7624| 1| 60-668001-24| BI-COLOR 24V
(3 WIRE) LED| CM-XXXX-76242| 2| 60-668001-24| BI-COLOR 24V
(3 WIRE) LED
OPTIONAL MORTISE CYLINDERS

ITEM
NUMBER| PART NUMBER| DESCRIPTION
5| CM-1000/60KD| MORTISE CYLINDER 1 1/8″. KEYED DIFFERENT (SOLD SEPARATELY)
CM-1000/60KA| MORTISE CYLINDER 1 1/8″. KEYED ALIKE (SOLD SEPARATELY)
CM-307| MORTISE CYLINDER HOUSING FOR BESTT’A STYLE IC CORE (SOLD SEPARATELY)
CM-308| BEST”‘ STYLE IC CORE. KEYED DIFFERENT (SOLD SEPARATELY)
COMPATIBLE MOUNTING BOX OPTIONS
ITEM
NUMBER| PART NUMBER| DESCRIPTION
6| CM-1100 SERIES
CM-34AL| SINGLE GANG ALUMINUM BOX. SURFACE MOUNT
27/8″W X 4 5/8″H X 2″D (73MM X 117MM X 51MM)
CM-66| FLUSH BOX & DRESS PLATE. STANDARD DEPTH BOX WITH 7″ X 7″ DRESS PLATE
HEAVY GAUGE STAINLESS STEEL
CM-31| SLEEVE COVER FOR STANDARD 2 3/4″ X 4 1/4″ (69MM X 110MM) SURFACE ELECTRICAL BOX.
HEAVY GAUGE STAINLESS STEEL
CM-CPC1| VANDAL AND WEATHER RESISTANT CLEAR LIFT COVER
CM-34BL| SINGLE GANG BLACK ABS BOX. SURFACE MOUNT
2 7/8″ W X 4 5/8″H X 1 3/4″D (73MM X 117MM X 44MM)
CM-2000 SERIES|
CM-23D| SURFACE BOX WITH EXTRA DEPTH. FLAME AND IMPACT RESISTANT BLACK POLYMER (ABS)
1 3/4″ W X 4 1/2″H X 1 3/4″D (46MM X 117MM X 43MM)

Opening New Doors to
Innovation, Quality and Support!
Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com

File: CM-1100/2000_Manual_Eng_R1.indd
Revision: July 31, 2019
Part No: #40-82B226

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CAMDEN DOOR CONTROLS User Manuals

Related Manuals