DANPOO Wall Mounted Bathroom Shelves Installation Guide
- June 17, 2024
- Danpoo
Table of Contents
Wall Mounted Bathroom Shelves
Installation Guide
Wall Mounted Bathroom Shelves
Product List
- Remove the screw from the hanging rod.
- Assemble the hanger rod on the shelf.
DRILL INSTALL
-
Marking installation points.
-
Drill holes where you mg eked, buried anchors or plaster wall anchors
-
Tighten the screws,
4. Serov the cap onto the ring -
Put small rubber stopper in the holt .
-
Put the glass on the base.
CAUTION
- Wood walls are installed directly with nails without the step of burying anchors.
- Make sure there are no pipes or electrical wires inside the wall at the installation location
NO DRILL INSTALL
- Wipe clean the walls ad dry then completely
- Apply glue to the outing surface
- Press for 3-5 seconds.
- Secure in the mounting position and press for 5 seconds.
- Secure for 48 hours with auxiliary fixing stickers
- Finished.
TIPS:
- Glue mounting method is only suitable for smooth surface watts, such as tile, glass, marble, metal etc.
- If you want to relative the product, you need to point the hair dryer at the bonded area on the wall and heat it for a few minutes.
Fits Any Wall Types
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>