DANPOO B08LB28X1T Bathroom Wall Shelf Instruction Manual

DANPOO B08LB28X1T Bathroom Wall Shelf

Specifications

Technical Details

Product Dimensions

• 15″×6.3″×16.1″-
• Max. Load: 44 lbs

Product List

• 1 x Tempered Glass
• 2 x Railing Bar (including 2 set screws)
• 2 x Vertical Bar4 x Bracket
• 1 x Towel Bar 2 moveable Hooks
• 1x Hardware Pack

DRILL INSTALL

1. Marking installation points.
2. Drill holes where you marked, buried anchors or plaster wall anchors.
3. Tighten the screws.
4. Screw the cap onto the ring
5. Put a small rubber stopper in the holt.
6. Put the glass on the base.

CAUTION:

1. Wood walls are installed directly with nails without the step of burying anchors.
2. Make sure there are no pipes or electrical wires inside the wall at the installation location

NO DRILL INSTALL

1. Wipe clean the walls and dry them completely.
2. Apply glue to the mounting surface.
3. Press for 3-5 seconds.
4. Secure in the mounting
5. Secure for 48 hours position and press for 5 with auxiliary fixing seconds. stickers
6. Finished.

TIPS:

1. The glue mounting method is only suitable for smooth surface walls, such as tile, glass, marble, metal, etc.
2. If you want to remove the product, you need to point the hair dryer at the bonded area on the wall and heat it for a few minutes.

Fit Any Wall Types

Documents / Resources

| DANPOO B08LB28X1T Bathroom Wall Shelf [pdf] Instruction Manual
B08LB28X1T Bathroom Wall Shelf, B08LB28X1T, Bathroom Wall Shelf, Wall Shelf, Shelf
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>