BUTURE B0CQ82QQXF Beta04 Jump Starter User Guide

BUTURE B0CQ82QQXF Beta04 Jump Starter

PRODUCT OVERVIEW

1. Jumpstart Port

2. Force Start Button

3. Display

4. USB Output 1 (18W)

5. USB C Input/Output
   (PD 65W Max)

6. DC Output

7. USB Output 2 (18W)

8. Power Button

9. LED Light

1. Power Level
2. Quick Charging
3. Ready to Work
4. Force Start Mode
5. Error Indicator
6. Charging
7. Discharging

JUMP START YOUR CAR

• Insert the jumper cable into the jump starter and connect the clamps to car battery (red to+, black to -).
• The sign shows on the screen.
• Start your car engine.

FORCE START FUNCTION

If the screen doesn’t display anything when you correctly connected the clamps to your car, you can use the Force Start Function to enter boost mode.

3 steps to fix the problem:

• Press the force start button for 5 seconds.
• The 2 signs show on the screen.
• Start your car engine.

Warning: When using the Force Start Function, auto-detection and safety features will be disabled.

TROUBLESHOOTING

RECHARGE

• Insert the charging cable into the USB C port.
• Connect to the corresponding adaptor (adaptor not included).

CHARGE ELECTRONIC DEVICES

• Plug the cable into the corresponding outport.
• Connect to electronic products like smartphones.
• Press the power button.

CHARGE 12V DC DEVICES

• Plug the cigarette lighter into the DC outport.
• Connect to 12V DC devices like tire pumps.
• Press the power button.

LED LIGHTING

PRECAUTIONS

1. The product is for 12V vehicles only.
2. Do not use the product with less than 70% power as this will damage the product.
3. Recharge every 3 months to prolong the lifespan.
4. Wait at least 30 minutes before recharging after starting the car.
5.  60s is recommended between starts, otherwise it will overheat.

IMPORTANT SAFETY WARNING

1. Store in a cool and well-ventilated place out reach of children and pets.
2. Do not place the product in high temperature environment for a long time. The operation temperature of this product is -20-60 C. The storage temperature should not exceed 50 C /122 P.
3. Only start vehicles with the smart jumper cable supplied by the manufacturer.
4. Do not use the product if the clamp or cable is damaged.
5. Do not connect the red and black clamps together when the product is outputting.
6. Do not connect the red and black clamps to the same piece of metal.
7. Do not disassemble or modify this product.
8. Do not use detergent to clean this product.
9. Do not abuse this product and avoid heavy dropping or repeatedly hitting it.
10. Do not operate the product in explosive environments such as flammable liquids, gases or dusts.
11. Do not immerse the product in water.
12. Do not litter the product and it should be safely recycled.
13. Do not incinerate the product or exposed to high temperatures, as they may explode.
14. Only use replacement parts or accessories provided or recommended by manufacturer.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>