chicco 567 KidFit Booster Car Seat User Guide

chicco 567 KidFit Booster Car Seat

Product Information

Specifications :

• Model Number: [Model Number]
• Serial Number: [Serial Number]
• Manufactured In: [Manufacturing Location]

Booster Seat Overview
The Chicco Booster Seat is a versatile car seat designed to provide safety and comfort for children. It can be used in two modes: High-Back Mode and Backless Mode.

Booster Seat Components:
The Booster Seat consists of the following components:

• Base
• Backrest
• Seat Cushion
• Armrests
• Shoulder Belt Clip
• Cup Holder (optional)

High-Back Mode:
In High-Back Mode, the Booster Seat includes a backrest that provides additional support and protection for the child’s head and neck.

Backless Mode:
In Backless Mode, the backrest can be removed, allowing the Booster Seat to be used as a simple cushion that raises the child to the appropriate height for the seat belt.

Vehicle Information

Vehicle Seating Positions:
Before installing the Booster Seat, refer to your vehicle’s manual to determine the appropriate seating positions for child restraints.

Vehicle Seat Belts:
The Booster Seat is designed to be used with the vehicle’s seat belts. Ensure that the seat belts are in good condition and properly functioning.

What is LATCH?
LATCH (Lower Anchors and Tethers for Children) is a system available in some vehicles that allows for the secure installation of child restraints. The use of LATCH with the Booster Seat is optional.

Assembly Information

Assembly:
Follow these steps to assemble the Booster Seat:

1. Attach the backrest to the base.
2. Secure the seat cushion onto the base.
3. Attach the armrests to the base.
4. If applicable, install the cup holder according to the instructions provided.

Product Usage Instructions

High-Back Mode

Adjusting Backrest Height:
To adjust the backrest height, follow these steps:

1. Lift the lever located on the back of the Booster Seat.
2. Move the backrest up or down to the desired position.
3. Release the lever to lock the backrest in place.

Install High-Back Booster Seat:
To install the Booster Seat in High-Back Mode, follow these steps:

1. Place the Booster Seat on the vehicle seat, aligning it with the seating position.
2. Ensure that the seat belt is threaded through the appropriate guides and buckle it securely.
3. Tighten the seat belt to remove any slack.

Securing Child in Booster Seat:
To secure a child in the High-Back Booster Seat, follow these steps:

1. Ensure the child is properly positioned in the Booster Seat.
2. Thread the shoulder belt through the shoulder belt guide and position it across the child’s shoulder.
3. Make sure the lap belt lies low and snug across the child’s hips.
4. Buckle the seat belt securely.

Backless Mode

Removing Backrest:
To remove the backrest and switch to Backless Mode, follow these steps:

1. Locate the release buttons on both sides of the backrest.
2. Simultaneously press the release buttons and lift the backrest upward to remove it from the base.

Using Shoulder Belt Clip:
In Backless Mode, a shoulder belt clip can be used to position the seat belt correctly. To use the shoulder belt clip, follow these steps:

1. Attach the shoulder belt clip to the seat belt according to the instructions provided.
2. Position the clip at the appropriate height to ensure proper seat belt placement on the child’s shoulder.

Install Backless Booster Seat:
To install the Booster Seat in Backless Mode, follow these steps:

1. Place the Booster Seat on the vehicle seat, aligning it with the seating position.
2. Ensure that the seat belt is threaded through the appropriate guides and buckle it securely.
3. Tighten the seat belt to remove any slack.

Securing Child in Booster Seat:
To secure a child in the Backless Booster Seat, follow these steps:

1. Ensure the child is properly positioned in the Booster Seat.
2. Thread the shoulder belt through the shoulder belt guide or shoulder belt clip, and position it across the child’s shoulder.
3. Make sure the lap belt lies low and snug across the child’s hips.
4. Buckle the seat belt securely.

Safety Information

Secure Child Checklist:
Before each use, perform the following checks to ensure the Booster Seat is safe for your child:

• Check that all components are securely attached and functioning properly.
• Verify that the seat belt is properly threaded through the appropriate guides and buckled securely.
• Ensure that the seat belt lies low and snug across the child’s hips.
• Confirm that the shoulder belt is positioned correctly on the child’s shoulder.

Booster Seat Safe Use Checklist:
Follow these guidelines to ensure safe use of the Booster Seat:

• Only use the Booster Seat if your child meets the weight and age requirements specified in the Child Guidelines section.
• Choose the appropriate Booster Seat configuration based on your child’s needs.
• Select a safe seating location in your car, following the guidelines in the Vehicle Seating Positions section.
• Secure your child properly using the instructions provided in the Securing Child in Booster Seat sections.

Additional Information

Installation on an Aircraft:
If you plan to use the Booster Seat on an aircraft, refer to the specific airline’s guidelines and regulations regarding child restraints.

Cup Holder:
If your Booster Seat includes a cup holder, follow the instructions provided to attach or release it as needed.

LATCH Connectors:
If your vehicle is equipped with LATCH, follow the instructions provided to connect the Booster Seat using the LATCH system.

Removing Fabric Covers:
To remove the fabric covers for cleaning or maintenance purposes, follow the instructions provided in the user manual.

Cleaning and Maintenance:
To keep the Booster Seat clean and in good condition, follow the cleaning and maintenance instructions provided in the user manual.

CHILD GUIDELINES
This Booster Seat is designed for children who demonstrate an ability to sit in a seat belt and meet the following requirements. ONLY use this Booster Seat if the child meets the following requirements:

• Child is at least 4 years old.
• Child can sit relatively still, in the same seated position throughout the car ride.
• Child can leave the shoulder and lap belt properly positioned on their body, and can do this every time in the car.
• Weight is between 30 and 110 pounds (13.6 and 50 kg).
• Height is between 38-57 inches (97-145 cm).

YOUR CHILD’S SAFETY DEPENDS ON YOU!
You MUST follow the detailed instructions in this User Guide to ensure the steps in this User Guide are performed correctly!

SAFE USE CHECKLIST

1. Make sure your child can sit in the seat properly and meets the requirements listed in the “Child Guidelines” section on page 4:

2. Choose the appropriate Booster Seat configuration:

   • HIGH-BACK MODE requirements on page 16
   • BACKLESS MODE requirements on page 18

3. Select a safe seating location in your car:
   Refer to the “Vehicle Seating Positions” section on page 20 and 21.

4. Secure your child:
   Refer to the “Safety Information” section on page 62.

IMPORTANT WARNINGS

WARNING:  DEATH or SERIOUS INJURY CAN OCCUR
FAILURE TO FOLLOW THESE INSTRUCTIONS AND THE PRODUCT LABELS CAN RESULT IN SERIOUS INJURY OR DEATH TO YOUR CHILD.

Take Time to Read This User Guide

• Carefully read and understand all instructions and warnings in this User Guide. Your child’s safety depends on you knowing how to setup, install and use this Booster Seat properly.
• Before installing this Booster Seat in a vehicle, be sure to also check the vehicle owner’s manual for information on proper installation.
• NEVER allow others to use this Booster Seat until they have read and understood all instructions in this User Guide.
• This Booster Seat is not intended for use outside of the vehicle.

Make Sure Child Fits This Booster Seat
Use ONLY with children who weigh between 30 lbs (13.6 kg) and 110 lbs (50 kg) and whose height is 38-57 inches (97 -145 cm). Determine the right installation setup for your child’s age, weight, height, and ability to sit properly at all times.

Install Child Restraint Correctly

• DO NOT PLACE THIS BOOSTER SEAT IN A VEHICLE SEATING LOCATION WITH A FRONTAL AIR BAG, UNLESS THE AIR BAG CAN BE TURNED OFF. If the airbag inflates, it can cause serious injury or death to your child. For vehicles with side air bags, refer to you vehicle owners manual for information on your booster seat installation.
• ALWAYS install this Booster Seat in the back seat if possible.
  • According to accident statistics, children are safer when properly restrained in a rear seating position rather than in the front seat.
• NEVER install in rear-facing, side facing, or on the back of a folded-down vehicle seat.
• NEVER use this Booster Seat with only a Vehicle Lap Belt.
• Use ONLY the vehicle’s lap and shoulder belt system when restraining the child in this booster seat.
• To avoid injury to others, ALWAYS secure this Child Restraint with the vehicle’s Lap-Shoulder Belt when unoccupied.
• DO NOT use this Booster Seat beyond the “Do Not Use After” date. Check the manufacturer’s label on the underside of the Booster Seat.

Secure Child Properly

• Position Lap-Shoulder Belt on your child. A loose or improperly positioned Lap-Shoulder Belt could cause the child to be ejected in a sudden stop or crash, resulting in serious injury or death.
• Make sure vehicle Lap-Shoulder Belt is not loose. The belt must be kept snug across child’s thighs and resting on the shoulder and across the center of the chest.
• NEVER use clothing or blankets that interfere with fastening or tightening the Lap-Shoulder Belt. An unsecured child could be ejected in a sudden stop or crash!
• ALWAYS check to make sure the vehicle seat buckle is securely latched.
• NEVER leave your child unattended in the vehicle.
• Do not allow children to play in or around the Booster Seat.

Check Condition of Restraint

• DO NOT use if the vehicle belts are cut, frayed or damaged.
• DO NOT use any accessories, pads or products not included with this Booster Seat, unless approved by Chicco USA. Doing so will void the warranty of this Booster Seat.
• You MUST replace this Booster Seat if it has been involved in a crash, even if you cannot see visible damage. A damaged Booster Seat may not protect your child in a future crash.
• Do not modify your Booster Seat.
• Do not use Booster Seat if any component is damaged, broken, or missing. Call 1-877-424-4226 to find out if the damaged part or parts can be replaced.

BEST PRACTICES

• Ensure all vehicle occupants are properly restrained before traveling. Unrestrained occupants can be thrown around and may be seriously injured or seriously injure other occupants in a sharp turn, sudden stop or crash.
• Do not leave loose objects, such as books, bags, etc., in the back of the vehicle. In the event of a sharp turn, sudden stop, or crash, loose objects can be thrown around and possibly cause serious injury to vehicle occupants.
• Cover the Booster Seat when the vehicle is parked in sunlight. Parts of a Booster Seat can become very hot if left in the sun. Contact with these parts can burn a child’s skin. Always check the surface of any metal or plastic parts before putting your child in the Booster Seat.
• To avoid strangulation, do not allow children to play with vehicle seat belts. If possible, move unused belts out of reach.
• Do not use anything to raise the Booster Seat off the vehicle seat such as a noodle or towel. In a sharp turn, sudden stop, or crash, the Booster Seat could slide and potentially cause serious injury.
• Never use a second-hand Booster Seat with an unknown history.
• Never use any accessories that are not included with this child restraint, unless specifically approved by Chicco. For more information, go to www.chiccousa. com.

NEED HELP?

Need Help Securing Your Booster Seat?
The following sources are available to help ensure your Booster Seat is properly installed:

• Contact Chicco, USA by visiting our website at www.chiccousa.com or calling our Customer Service 1-877-424-4226. Please have Model and Serial Number available when you call. These are located on a label on the bottom of the Booster Seat.
• Refer to your vehicle manual for Booster Seat installation tips.
• Contact a certified Child Passenger Safety Technician in your area by visiting safercar.gov and select “Find Local Child Seat Help” or call 1- 866-SEAT CHECK (1-866-732-8243).

BOOSTER SEAT COMPONENTS

HIGH-BACK MODE

WARNING! High-Back Mode use of this Booster Seat is ONLY for children who meet ALL of the requirements shown here. If the child is not within these requirements because they are too small, select a different child seat (such as a forward facing harness seat or convertible seat).

To ensure a correct installation of the Booster Seat, you must follow the step by step instructions in this user guide.

High-Back Mode:
30 – 100 lbs (13.6 – 45.3 kg)

Use High-Back Mode with children:

• Who are at least four years old.
• Who weigh between 30 and 100 lbs (13.6 – 45.3 kg).
• Who are 38”to 57” (97 -145 cm) tall and the child’s ears are below the headrest.
• Who demonstrate an ability to sit relatively still and properly in a seat belt at all times. See Adjusting Shoulder Belt Guide Height on page 38.

BACKLESS MODE

WARNING! Backless Mode use of this Booster Seat is ONLY for children who meet ALL of the requirements shown here. If the child is not within these requirements because the child is too small, review the HIGH-BACK BOOSTER MODE guidelines on page 16 or select a different child seat.

To ensure a correct installation of the Booster Seat, you must follow the step by step instructions in this user guide.

Backless Mode:
40 – 110 lbs (18 – 50 kg)

Use Backless Mode with children:

• Who are at least four years old.
• Who weigh between 40 and 110 lbs (18 – 50 kg).
• Who are 38”- 57”(97 -145 cm) tall and the child’s ears are below vehicle seat.
• Who demonstrate an ability to sit relatively still and properly in a seat belt at all times. See Adjusting Shoulder Belt Clip Height on page 58.

VEHICLE SEATING POSITIONS

WARNING! WHEN USING THIS CHILD RESTRAINT, DO NOT PLACE THIS CHILD RESTRAINT IN A VEHICLE SEATING LOCATION WITH A FRONTAL AIR BAG, UNLESS THE AIR BAG CAN BE TURNED OFF.

The back seat is the safest place for children 12 and under. See your vehicle owner’s manual for Booster Seat installation and instructions. Some vehicles have no seating positions which are compatible with this Booster Seat. Only forward-facing vehicle seats can be used with this Booster Seat. Never use side or rear facing seats. If in doubt, contact the vehicle manufacturer for assistance.

This Booster Seat must be installed in a vehicle seat with a 3-point seat belt (shoulder belt and lap belt). NEVER use lap belt only.

VEHICLE SEAT BELTS
Vehicle seat belts differ from vehicle to vehicle. Refer to your vehicle owner’s manual for specific information about seat belts and their use with booster seats.

• Shoulder belt with switchable retractor:
  Refer to your vehicle owner’s manual for information regarding switchable retractors and booster seat use.

• Inflatable seat belts:
  Follow the vehicle manufacturer’s instructions for use with this Booster Seat.

The following types of vehicle belts MUST NOT be used to install this Booster Seat. If any of the belt types listed below are in the chosen seating position, you must choose another vehicle seating position.

1. Never use a Lap belt with motorized Shoulder belt.
2. Never use vehicle belts that are attached to the door or that move along a track.
3. Never use a Lap-only belt.

WHAT IS LATCH?

WARNING : This Booster Seat is designed to be used with lower LATCH anchors at the standard spacing (11 inches (28 cm)) ONLY! Refer to vehicle owner’s manual for information about LATCH and Booster Seat installation positions.

LATCH = Lower Anchors and Tethers for CHildren
On this Booster Seat, Lower Anchors are only used to restrain the Booster Seat, not to restrain your child. To secure your child, a vehicle Lap-Shoulder Belt MUST be used. Please refer to the vehicle owner’s manual for designated Lower Anchor locations in vehicles. Some vehicles owner’s manual use the term “ISOFIX”. ISOFIX lower anchors may also be used to secure the Booster Seat. If the vehicle is equipped with LATCH, the vehicle lower anchor points may be visible at the seat crease. If not visible, the seating position may be marked with a symbol as shown or a colored dot. The top tether anchor is not used with this Booster Seat.

ASSEMBLY

1. Assemble the Cup Holder
   Match up the letter (L or R) on the bottom of the Cup Holder with the matching letter on the Booster Seat and insert the Cup Holder into the correct side.
   Make sure the Cup Holder lip fits behind the groove on the Booster Seat bottom, as shown.

2. Assemble the Armrests
   Attach both Armrests to the Booster Seat Bottom, as shown. Press firmly on the Armrests until they click into place. Pull up on both Armrests to make sure they are securely attached.
   Never use a Booster Seat without Armrests attached.

3. Assemble the Backrest

4. Attach the Backrest to the Booster Seat Bottom, by hooking the Backrest over the seat bar hinge on the seat bottom, as shown.
   Slide the edge of the Fabric Panel between the Fabric Cover and the Seat Back Frame. Be sure Fabric Panel is laying flat against the Seat Back frame to provide padding for your child.
   Rotate the Backrest up until it clicks into an upright position.

ADJUSTING BACKREST HEIGHT

1. While holding the Booster Seat firmly with one hand on the seat, use the other hand to squeeze the Height Adjuster Lever located at the back of the Headrest.
2. Raise/Lower the Backrest to correctly fit the Booster Seat to your child.

When the correct position is reached, release the Height Adjust Lever and slightly raise or lower the Backrest until you hear a click, indicating that the Backrest is locked into position.  The Booster Seat Backrest has 10 height positions to allow the Booster Seat to grow with your child. Ensure that the child’s head is positioned correctly within the Headrest and that the Shoulder Belt is placed correctly over the child’s shoulder.

INSTALL HIGH-BACK BOOSTER SEAT

1. Place the Booster Seat on the vehicle seat, push the Booster Seat Backrest against the back of the vehicle seat.

2. Check that the head restraint of the vehicle seat does not interfere with the Headrest of the Booster Seat. If the vehicle head restraint pushes the Booster Seat Headrest forward, raise or remove the vehicle head restraint, if possible. If it is not possible to move the vehicle head restraint out of the way, use the Booster Seat in the Backless Mode. Ensure the child is the proper size to use the Backless Booster Seat. Refer to page 18. Always replace the vehicle head restraint when the Booster Seat is removed.
   INSTALL HIGH-BACK BOOSTER SEAT
   Use of LATCH Connectors with this Booster Seat is optional. If the LATCH Connectors are not used, pull the LATCH Tightening Strap snug so that the LATCH Connectors do not interfere with the seat belt.

3. If using the LATCH Connectors, release the LATCH Adjustment Strap, press in the button located on the front of the seat bottom and pull out both LATCH Connectors.

4. Locate the LATCH lower anchor bars in your vehicle. Attach both LATCH Connectors to the vehicle lower anchor bars.

5. Pull on the LATCH Adjustment Strap and push back on the seat bottom to snug up the Booster Seat to the vehicle seat back.

SECURING CHILD IN BOOSTER SEAT

1. Place the child into the Booster Seat, making sure the child is sitting with his/her back against the Booster Seat Backrest.

2. The Shoulder Belt Guide must be positioned at or just slightly above the child’s shoulders. Adjust the seat back to the proper height. Make sure the shoulder belt lays across the shoulder and over the center of the child’s chest. The lap belt should lay over the child’s thighs. If the Shoulder Belt Guide is NOT positioned at or just slightly above the child’s shoulders see page 32 for Adjusting Backrest Height. Child’s ears must be below Headrest when sitting on Booster Seat. If the child’s ears are above the Headrest, use the Backless Booster Mode refer to page 46.

3. SECURING CHILD IN BOOSTER SEAT
   Route the lap belt UNDER the 1st Armrest, across the child’s thighs, then route the shoulder belt and the lap belt UNDER the 2nd Armrest closest to the vehicle buckle as shown. Lap-Shoulder belts MUST be under the ARMRESTS, as shown.
   Buckle the seat belt.
   

4. Slide the shoulder belt through the orange Shoulder Belt Guide (A). Make sure belt is below belt guide clip (B).
   The lap belt should lay flat and snug across the child’s thighs. And, when the shoulder belt is pulled up, it will lay flat and snug across the child’s chest.The seat belt can remain in the Shoulder Belt Clip until the seat is removed from the Vehicle.

5. Ensure the child is secured correctly as shown.

REMOVING BACKREST

1. To remove the Backrest, turn the seat over and press down on the Backrest Connection Release at the base of the seat back under the seat bar.
2. At the same time rotate the seat back (A) and remove Backrest from the Booster Seat bottom (B), as shown.
3. Tuck the Fabric Panel between the fabric cover and the seat surface, as shown.

USING SHOULDER BELT CLIP

1. The Shoulder Belt Clip is stored under the Booster Seat bottom. Remove the Shoulder Belt Clip and Strap stored underneath seat.
2. Place the Booster Seat onto the vehicle seat.
3. If using LATCH Connectors, release LATCH Adjustment Strap, press in the button located on the front of the seat bottom (A) and pull out on both LATCH Connectors (B). Use of LATCH Connectors with this Booster Seat is optional. If the LATCH Connectors are not used, pull the LATCH Adjustment Strap snug so that the LATCH Connectors do not interfere with the seat belt. Skip to “Securing Child in Booster Seat” section page 56.
4. Locate the LATCH lower anchor bars in your vehicle. Attach both LATCH Connectors to the vehicle lower anchor bars.
5. Pull on the LATCH Adjustment Strap and push back on the seat bottom to snug up the Booster Seat to the vehicle seat back.

SECURING CHILD IN BOOSTER SEAT

1. Place the child into the Booster Seat, making sure the child is sitting with his/her back against the vehicle seat back.
   The child’s ears must be below vehicle seat back or vehicle head restraint when sitting on Booster Seat. If the child’s ears are above the vehicle seat back or vehicle head restraint when it is fully extended, use the High-Back Mode. Refer to page 32.

2. Route the lap belt UNDER the 1st Armrest, across the child’s thighs, Then route the shoulder belt and the lap belt UNDER the 2nd Armrest closest to the vehicle buckle as shown. Lap-Shoulder belts MUST be under ARMRESTS, as shown.
   Buckle the seat belt.

3. To adjust the Shoulder Positioning Clip, pull the clip up or down to adjust the Shoulder Positioning Clip to be at or slightly above the child’s shoulders.

4. Slide the vehicle shoulder belt through the Shoulder Positioning Clip (as shown). Shoulder Positioning Clip must be at child’s shoulder. If necessary, readjust the location of the Clip to ensure that the seat belt lays flat and snug across the child’s chest and the lap belt lays flat and snug across the child’s thighs.

5. The child is now secured correctly, as shown.

When using in Backless Mode, the Shoulder Positioning Clip must be used until the seat belt naturally lays flat across the center of the child’s shoulder.

SECURING CHILD CHECKLIST
ALWAYS check to make sure vehicle seat belt is securely buckled. If buckle separates, child could be killed or seriously injured.

• Check that the seat belt is not twisted.

• Check that the shoulder belt is snug on the child’s shoulder and that it does not rub on the neck. It should lie flat across the child’s chest and middle of shoulder. The Shoulder Belt Guide should be at or just above the child’s shoulder. If necessary, raise or lower the Booster Seat Backrest.
  WARNING : DO NOT use anything (pillows, blankets, etc.) between the Booster Seat and the vehicle seat or between the child and the Booster Seat. Avoid bulky clothing that interferes with proper seat belt placement. In the event of an accident, the Booster Seat may not operate correctly.

• Do not let your child slide forward or downward while in the Booster Seat.

• Never use the vehicle belt in any position other than those indicated in this User Guide!

BOOSTER SEAT SAFE USE CHECKLIST

To avoid injury to others, ALWAYS secure this Booster Seat when unoccupied. An unsecured Booster Seat could injure other occupants in a sudden stop or crash. Secure the unoccupied Booster Seat with either LATCH or the vehicle belt by following the appropriate steps below. The LATCH system is adequate to secure the Backless Booster Seat, but the Lap-Shoulder belt should be used to secure the High-Back Booster Seat.

1. Follow steps 3-5 to use LATCH page 52.
2. High-Back Mode, follow steps 3-4 to use Lap-Shoulder belt page 40. Backless Mode, follow step 2 to use Lap-Shoulder belt page 56.

INSTALLATION ON AN AIRCRAFT

This Booster Seat is NOT certified for aircraft use. Aircraft do not have lap- shoulder belts to secure your child.

CUP HOLDER

WARNING!
DO NOT place hot liquids in cup holder. If spilled, hot liquids could burn child. PLASTIC CONTAINERS ONLY – No glass or metal containers. Only use cups with less than 12 oz. (355 ml) capacity. Never place sharp or pointed objects in Cup Holder. In a crash these objects could hit you or your child and cause serious injuries.

1. To remove the Cup Holders press in on the release button on the bottom of the Booster Seat.
2. The Cup Holders can also be folded in to allow others to sit next to the Booster Seat.

RELEASE LATCH CONNECTORS

1. To release the LATCH Connectors and remove the Booster Seat, press in the button located on the front of the seat bottom while pulling the Booster Seat out to loosen the LATCH Connectors.
2. Then pull out on the loops on the LATCH Straps, as shown. Pull the LATCH Adjustment Strap tight to store the LATCH Connectors.

REMOVING FABRIC COVERS

1. Booster Seat bottom
   Remove both Cup Holders and flip the Booster Seat bottom over and unhook 6 elastic loops, as shown. If the Backrest is attached to the seat bottom, see page 46 for removing Backrest. Both Cup Holders need to be removed before fabric can be removed, refer to page 68.

2. REMOVING FABRIC COVERS
   Flip the fabric over and remove the Foam Pad before washing the fabric. Make sure to insert the Foam Pad into the fabric seat bottom before reinstalling onto the seat bottom frame.

REMOVING FABRIC COVERS

1. Backrest fabric cover
   On the Booster Seat Backrest, unhook 6 elastic loops as shown. Four behind the Headrest and two at the bottom of the seat back.

2. Backrest fabric cover
   Lift up on the plastic tabs at the top of the Headrest and below the Shoulder Belt Guides, as shown. Pull the Backrest fabric cover forward to remove it.

REMOVING FABRIC COVERS
Repeat the Removing Fabric steps in the reverse order, ensuring that the fabric cover fits onto and around the frame correctly, in particular around the orange belt guides.

1. Position the fabric cover on the Booster Seat Backrest and reattach all elastic loops.
2. Tuck in the fabric along the Backrest edges.
3. Insert the plastic tab on the top of the Headrest into the long groove right above the top edge of the Backrest.
4.  Insert the plastic tab below the Shoulder Belt Guide, slide between the Backrest and foam. Repeat for the other side.
5. Position the fabric cover on the Booster Seat bottom and tuck in the fabric along the belt guide edges. Flip the seat bottom over. Then tighten the fabric over the Booster Seat bottom further by reattaching the elastic loops, as shown.

REMOVING ARMREST COVERS

1. Armrest covers
   Locate the Armrest release button directly under the front of the Armrest. Pull on the button and at the same time lift up on the front edge to remove the Armrest pad.

2. Pull back on the edges of the Armrest fabric covers and slide the fabric off the Armrest base.

3. To reattach the Armrest, insert the Back Tab into the Armrest base and push down on the front edge until it clicks into the base.

NEVER use the seat without Armrest fabric covers.

CLEANING AND MAINTENANCE

WARNING: DO NOT USE BLEACH, solvents or household cleaners as they may weaken plastics and straps.
WARNING: DO NOT USE SOAPS OR LUBRICANTS on the LATCH Connectors or straps. It may cause them to malfunction.

• Fabrics may be spot-cleaned:
  Hand wash using mild soap and water, or machine wash in cold water on delicate cycle using mild detergent. Hang to dry. See page 72 for removal instructions.

• Foam Insert:
  Hand rinse and air dry.

• Cleaning Plastics:
  Sponge clean using warm water and mild soap. Towel dry.

• Cleaning LATCH Connectors Hardware and Straps:
  LATCH Connectors hardware and straps cannot be replaced. Sponge clean using warm water. Air dry.

• Storing the Booster:
  When it is not installed in the car, it is recommended to store the Booster in a dry place, away from sources of heat, dust, humidity and direct sunlight.

If you have any problems with your Chicco Booster Seat, or any questions regarding installation or use, please call: Chicco Customer Service 1-877-424-4226 Please have Model and Serial Number available when you call. These are located on a label on the bottom of the Booster Seat. For future reference, fill in the information below. The information can be found on the label on the bottom of the Child Restraint.

Model Number:__

Serial Number:___

Manufactured In:___

REGISTRATION AND RECALL
Please complete the Registration Card that came with your Booster Seat and mail it promptly. Child Restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address, e-mail address if available, and the restraint’s model number and manufacturing date to: Artsana USA, Inc. 1826 William Penn Way Lancaster, PA 17601 or call 1-877-424-4226 or register online at http://www.chiccousa.com/carseatregistration.aspx For recall information, call the U.S. Government’s Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153), or go to http://www.NHTSA.gov.

Frequently Asked Questions

Where can I find the Model and Serial Number of my Chicco Booster Seat?
The Model and Serial Number can be found on a label located on the bottom of the Booster Seat.

How do I register my Booster Seat?
To register your Booster Seat, complete the Registration Card included with your purchase and mail it to Artsana USA, Inc. Alternatively, you can register online at http://www.chiccousa.com/carseatregistration.aspx

How can I obtain recall information for my Booster Seat?
For recall information, contact Chicco Customer Service at 1-877-424-4226 or visit http://www.NHTSA.gov.

References

• Manual-Hub.com - Free PDF manuals!
• Safer Car Vehicle Safety, Ratings and Recalls | NHTSA
• Chicco Baby Products | Car Seats, Strollers, Highchairs & More
• Sites-Chicco-Site
• NHTSA | National Highway Traffic Safety Administration
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>