Cobra CDR 875 G 1080P Full HD with Internal GPS and Bluetooth User Guide

: May 15, 2024
: Cobra

Table of Contents

Cobra CDR 875 G 1080P Full HD with Internal GPS and Bluetooth
Product Information
Product Usage Instructions
CONTROLS & CONNECTIONS
INSTALLATION
APP CONNECTION
COMPUTER CONNECTION
STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Cobra CDR 875 G 1080P Full HD with Internal GPS and Bluetooth

Product Information

Specifications

Model: CDR 875 G
GPS Enabled: Yes
Controls & Connections:
- GPS Chip
- Suction Cup Lever
- GPS Connector
- Quick Release Mount
- Emergency Recording Button
- Power/Volume Button
- Micro USB Port
- Micro SD Card Slot
- Button 1 Reset
- Microphone
- Button 2
- Button 3
- HDMI Output
- Button 4

Product Usage Instructions

Installation

MOUNT: Screw the included suction cup into the mount. Slide the mount into the camera and press the lever to secure the unit to your vehicle’s windshield. Plug the GPS cable from the mount into the GPS port on the dash cam.
POWER: Plug the unit into your vehicle’s cigarette lighter plug.
DRIVE! When power is applied, the unit will automatically turn on and start recording. Pressing [BUTTON] at any time will stop recording, and pressing [BUTTON] will start recording again. Pressing [BUTTON] at any time will capture a still photo. Pressing [BUTTON] will create an Emergency Recording. Emergency Recordings will not be overwritten by Continuous Loop Recording. Pressing [BUTTON] will turn the screen OFF, but the dash cam will continue recording. Press any button to turn the screen back ON.

Bluetooth Pairing Instructions for iPhone

Power on your dash cam.
Make sure your iPhone’s Bluetooth is ON. The dash cam will NOT APPEAR in the iPhone’s Bluetooth Settings Menu.
Start the Cobra iRadar App. Press the Menu button in the upper left of the app and select Devices. Follow the onscreen instructions to complete the pairing and connection.
When complete, a connected chime will sound, and [ICON] will turn white on the dash cam display.

Bluetooth Pairing Instructions for Android

Power on your dash cam.
Enter your Android device’s Bluetooth Settings Menu.
Scan for Devices and select Drive HD to pair.
Enter the Cobra iRadar App. A connected chime will sound, and [ICON] will turn white on the dash cam display.

Computer Connection
To view videos on a computer, connect the dash cam using the included cable. Select Connect to Computer on the dash cam. It will mount as a drive on the computer called DriveHD. Movie clips and photos can be found in the DCIM folder. Video clips are saved as. MOV files and can be played by most video players on both PC and Toder to see embedded GPS, Speed, Heading, and G-Sensor information, you must view videos using Cobra’s Drive HDTM Player. Drive HD Player can be downloaded for free at: www.cobra.com/dashcamsoftware

Storage
An 8GB MicroSD card comes installed in this dash cam, but it supports cards up to 32GB as long as they are Class IV or higher.

FAQ

Q: Where can I find full product manuals, firmware updates, and additional language support?
A: You can find full product manuals, firmware updates, and additional language support at www.cobra.com.
Q: Where can I find a list of Bluetooth Smart Ready devices?
A: You can find a list of Bluetooth Smart Ready devices at www.bluetooth.com.

CONTROLS & CONNECTIONS

$Cobra-CDR-875-G-1080P-Full-HD-with-Internal-GPS- and-Bluetooth-FIG- $1$$

The functions of Buttons 1-4 are indicated by the icon directly above each button and change depending on the state of the unit

INSTALLATION

MOUNT
Screw the included suction cup into the mount. Slide the mount into the camera and press the lever to secure the unit to your vehicle’s windshield. Plug the GPS cable from the mount into the GPS port on the dash cam.
POWER
Plug the unit into your vehicle’s cigarette lighter plug.
DRIVE!
When power is applied the unit will automatically turn on and start recording.

Press to stop recording and to start again.
Pressing at any time will capture a still photo.
Press to create an Emergency Recording.
Emergency Recordings will not be overwritten by Continuous Loop Recording.
Press to turn the screen OFF. The dash cam will continue recording. Press any button to turn the screen back ON.

APP CONNECTION

The CDR 875 G uses a Bluetooth® Smart connection to the Cobra iRadar® smartphone app. Smartphone integration allows for displaying iRadar driver awareness alerts including:

$Cobra-CDR-875-G-1080P-Full-HD-with-Internal-GPS-and-Bluetooth-FIG- $8$$

Download the app from the App Store or Google Play $Cobra-CDR-875-G-1080P- Full-HD-with-Internal-GPS-and-Bluetooth-FIG- $9$$

For iPhone® 4s and later with Bluetooth® Smart:

Power on your dash cam.
Make sure your iPhone’s Bluetooth is ON. The dash cam will NOT APPEAR in the iPhone’s Bluetooth Settings Menu.
Start the Cobra iRadar App. Press the Menu button in the upper left of the app and select Devices. Follow the onscreen instructions to complete the pairing and connection.
When complete, a “connected” chime will sound and will turn white on the dash cam display.

For Android™ Devices with Bluetooth® Smart:

Power on your dash cam.
Enter your Android device’s Bluetooth Settings Menu.
Scan for Devices and select Drive HD to pair.
Enter the Cobra iRadar App. A “connected” chime will sound and will turn white on the dash cam display.

COMPUTER CONNECTION

$Cobra-CDR-875-G-1080P-Full-HD-with-Internal-GPS-and- Bluetooth-FIG- $11$$

To view videos on a computer connect the dash cam using the included cable.
Select Connect to Computer on the dash cam. It will mount as a drive on the computer called DriveHD.
Movie clips and photos can be found in the DCIM folder.
Video clips are saved as. MOV files and can be played by most video players on both PC and Mac.
To see embedded GPS, Speed, Heading, and G-Sensor information you must view videos using Cobra’s Drive HD™ Player.
Drive HD Player can be downloaded for free at: www.cobra.com/dashcamsoftware

STORAGE

An 8GB MicroSD card comes installed in this dash cam, but it supports cards up to 32GB as long as they are Class IV or higher.

For full product manuals, firmware updates, and additional language support, visit www.cobra.com
For a list of Bluetooth Smart Ready devices visit: www.bluetooth.com

HDMI, the HDMI logo, and High-Defnition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.
The Driver Awareness Alert display feature is subject to US Patent Numbers 8,842,004, 8,970,422, 9,132,773, 9,135,818, and additional pending US Patent Applications.
©2015 Cobra Electronics Corp., Part No.: 480-1063-P, Printed in China, Version A