Cobra CWA BTH8 Hands Free Headset User Manual

: June 17, 2024
: Cobra

Cobra CWA BTH8 Hands Free Headset

Cobra CWA BTH8 Hands Free Headset

WARRANTY SERVICE

All defective units within the warranty periods will be repaired or replaced.

WARRANTY DOES NOT APPLY TO:

Damage resulting from use of the unit in other than it’s normal and intended manner.
Damage from misuse, accident, neglect, improper testing, installation, alteration, modification of any kind, and/or spillage of food or liquid.
Damage caused by natural disaster and/or the capacity of expendables is exhausted.

BLUETOOTH® WIRELESS TECHNOLOGY

Bluetooth wireless technology propels you into a new domain in wireless connectivity.
Now you can communicate without wires, using built in radio transceivers that operate on a globally available radio frequency to ensure worldwide compatibility. Your Cobra CWA BTH8 headset can connect with other Bluetooth wireless technology enabled devices with in a 32 foot range.

HOW TO USE YOUR HEADSET

Your wireless headset can be paired with any other Bluetooth wireless technology equipped devices.

Use with your cellular phone.
Handle incoming and outgoing calls with the one touch multi-function button.
Use voice dialing to make calls if supported by your phone.

THANK YOU!

Thank you for purchasing the Cobra CWA BTH8 hands-free headset. Please read this entire user guide to get started and to make the best use of your headset’s many features. When you are driving a car, driving is your first responsibility. Please follow local regulations.

PRODUCT FEATURES

20 Hours Talk Time
400 Hours Standby Time
Lightweight
T5 Sonance Noise Cancellation Technology

CHARGING ACCESSORIES

USB Charging Cable
12V CLP Vehicle Charger

BATTERY

Rechargeable lithium polymer battery

PRODUCT DESCRIPTION

The Cobra CWA BTH8 is a Bluetooth wireless technology enabled ultra lightweight headset featuring a boom microphone and extra long talk and standby times. The Cobra CWA BTH8 also features T5 Sonance Noise Cancellation Technology allowing you to have a crystal clear conversation even in the nosiest of environments.

PRODUCT OVERVIEW

This headset is designed for an active lifestyle, combining stylish design and reliable wireless technology into the ideal lightweight over the head style headset.
This headset can be paired to any Bluetooth wireless technology enabled device such as a computer, gaming unit, PDA, cellphone, and more.
This headset meets the requirements for hands-free laws.

CHARGING THE HEADSET

The Cobra CWA BTH 8 uses a rechargeable internal battery. You must charge the battery fully before using the headset for the first time.

Plug the USB charging cable into the headset.
Plug the USB charging cable into a USB port on a PC or insert the USB cable into the cigarette charging adapter and place into a working cigarette lighter outlet.
The indicator light will illuminate red while charging.
A full charge will take approximately 2-4 hours. The red indicator light will turn off once fully charged.

NOTE : Your headset is powered by a non-removable rechargeable Lithium Polymer internal battery. The full performance of a new battery is achieved only after 2-3 complete charging and discharging cycles. This battery can be charged and uncharged hundreds of times, but will eventually wear out. Do not use the headset while charging.
Do not leave a fully charged battery connected to the charger, as it may shorten the battery life. If left unused for over twenty days, a fully charged battery will slowly begin to lose it’s charge.

TURNING THE HEADSET ON OR OFF

To turn the headset on, press and hold the multi-function button for 3 seconds. The indicator light will illuminate blue and flash every 10 seconds.
To turn the headset off, press and hold the multi-function button for 7 seconds, the indicator light will flash red 3 times and shut down.

PAIRING THE HEADSET WITH YOUR PHONE

The distance between your phone and your headset during the pairing should be about 3 feet.

Ensure that the headset is fully charged and turned on.
Press and hold the multi-function button until you see the indicator light flash red AND blue.
Activate the Bluetooth on your phone. Set your phone to search or discover the headset by following the instructions in your phone’s user guide.
Your phone will find the “CBTH8” headset and ask you if you want to pair with it, select yes or ok.
When prompted, enter password 0000 and then press enter, yes or ok.

IMPORTANT : If the pairing process was successful, the indicator light will flash blue 3 times, and then it will flash blue once every 7 seconds.

If your are unsuccessful, the red and blue LED will continue to alternate blue and red. If pairing is unsuccessful, turn off your headset and repeat steps 1-5 as well as referencing your phone’s user manual. To turn off the headset, press and hold the multifunction button for about 7 seconds.

The pairing mode of the headset generally lasts for about 60 seconds.

ANSWERING A CALL

When a call comes in, you will hear a ringtone in the headset. Press the multi-function button once or use your phone’s keypad.

ENDING A CALL

To end a call, press the multi-function button once or use your phone’s keypad.

VOICE DIALING

Voice dialing is available, if your phone supports this feature.

Connect the headset and turn on the phone’s voice recognition software.
Press the multi-function button once on the headset.
Following the beep prompt, say the name of the person you wish to call.

PROBLEMS WITH HEADSET DISCONNECTING

Ensure that the headset is fully charged, is turned on, and has been successfully paired to your mobile device.
Ensure the Bluetooth wireless technology function is enabled on your device.
Be sure the headset and enabled device are within 32 feet (10 meters) of each other, with no interference.

VOLUME CONTROL

Press and hold the + to increase the volume.
Press and hold the – to decrease the volume.
You’ll hear a beep from the headset when the volume is at the maximum or minimum.

IMPORTANT:

Not all functions or operations stated in this user manual will work with all phones. Functions and operations are subject to individual mobile phone and carriers. Please read your phone’s instructions guide as operation and step sequences may be different.

PROPER DISPOSAL

This product should not be disposed of with other household wastes at the end of its’ working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote sustainable reuse of material resources.
This headset contains a lithium polymer battery.
Headset user should contact either the retailer where they purchased the headset or their local government office for detail of where and how to dispose or recycle.

Federal Communications Commission (FCC) Statement

15.21

You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

This device may not cause interference and
This device must accept any interference, including interference that may cause undesired operation of the device.

FCC RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Declaration of Conformity

FCC (FCC ID: WSGSK-BH-M12) CWA BTH8 is FCC certificated as this device complies with part 15 of the FCC rules.

European CE 0678:

CWA BTH8 has been manufactured in accordance with the European R& TTE directive. It complies with the European Low Voltage Directive 73/23/EEC and the European EMC Directive 89/336/EEC.- Reorient or relocate the receiving antenna.

BQB Qualification

Bluetooth Qualified Design ID: (QDID) B014585.
CWA BTH8 Bluetooth® Wireless Headset, a BQB Qualified Bluetooth® wireless technology product is listed as qualified End Product in accordance to section 6.2.4 of the PRD.

Customer Support

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. Cobra Electronics Corporation Cobra, Nothing Comes Close to a Cobra and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation is a trademark of Cobra Electronics Corporation, USA.
©2011 Cobra Electronics Corporation
6500 West Cortland Street
Chicago, Illinois 60707
www.cobra.com
MADE IN CHINA

Logo