ZOTAC ZBOX PC with Solid State Active Cooling User Guide

ZOTAC ZBOX PC with Solid State Active Cooling

Product Information

Specifications

• Package Contents: 1 x ZBOX, 2 x VESA
• Front Panel: Power button, MicroSD memory card slot, USB Type-C, USB 3.1 port, Analog audio jack (3.5mm)
• Rear Panel: WiFi antenna connector, LAN (RJ45) ports, USB 3.1 port, DisplayPort, HDMI port, Power input (DC19V)

Product Usage Instructions

Customizing Your Zotac ZBOX

1. Loosen the 4 screws securing the bottom cover.
2. Gently remove the cover.

Installing Memory Modules

1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot at a 45-degree angle.
2. Gently press down on the memory module until it locks into place by the arms of the memory slot.

Installing M.2 SSD Module

1. Locate the M.2 SSD slot and insert an M.2 SSD module into the slot at a 45-degree angle.
2. Gently press down on the M.2 SSD module and install the screw.

Setting Up Your Zotac ZBOX

1. Connecting antenna for Wi-Fi
2. Connecting to a wired home network
3. Connecting USB 3.1 devices
4. Connecting a DisplayPort display
5. Connecting an HDMI display
6. Connecting the power adapter and turning on the system

FAQ

• Q: What is included in the package contents?
• A: The package includes 1 x ZBOX and 2 x VESA.
• Q: How do I customize my Zotac ZBOX?
• A: To customize your Zotac ZBOX, follow these steps:
• Loosen the 4 screws securing the bottom cover. Gently remove the cover.
• Q: How do I install memory modules?
• A: To install memory modules, follow these steps:
• Locate the SO-DIMM memory slots and insert an SO-DIMM memory module into the slot at a 45-degree angle.
• Gently press down on the memory module until it locks into place by the arms of the memory slot.
• Q: How do I install an M.2 SSD module?
• A: To install an M.2 SSD module, follow these steps:
• Locate the M.2 SSD slot and insert an M.2 SSD module into the slot at a 45-degree angle.
• Gently press down on the M.2 SSD module and install the screw.
• Q: How do I set up my Zotac ZBOX?
• A: To set up your Zotac ZBOX, follow these steps:
• Connecting antenna for Wi-Fi
• Connecting to a wired home network
• Connecting USB 3.1 devices
• Connecting a DisplayPort display
• Connecting an HDMI display
• Connecting the power adapter and turning on the system

PACKAGE CONTENTS

• 1 x ZOTAC ZBOX
• 2 x VESA mount
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Antenna
• 1 x Quick Start Guide

CUSTOMIZING YOUR ZOTAC ZBOX

1. Loosen the 4 screws securing the bottom cover.
2. Gently remove the cover.

INSTALLING MEMORY MODULES

1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot at a 45-degree angle.
2. Gently press down on the memory module until it locks into place by the arms of the memory slot.

INSTALLING M.2 SSD MODULE

1. Locate the M.2 SSD slot and insert an M.2 SSD module into the slot at a 45-degree angle.
2. Gently press down on the M.2 SSD module, and install the screw.

FRONT PANEL

1. Power button
2. MicroSD memory card slot
3. USB Type-C
4. USB 3.1 port
5. Analog audio jack (3.5mm)

REAR PANEL

1. WiFi antenna connector
2. LAN (RJ45) ports
3. USB 3.1 port
4. DisplayPort
5. HDMI port
6. Power input (DC19V)

SETTING UP YOUR ZOTAC ZBOX

1. Connecting antenna for Wi-Fi
2. Connecting to a wired home network
3. Connecting USB 3.1 devices
4. Connecting a DisplayPort display
5. Connecting an HDMI display
6. Connecting the power adapter and turning on the system

CONTACT

• facebook.com/zotac.
• twitter.com/zotac.
• youtube.com/zotacofficial.
• vimeo.com/zotac.
• instagram.com/zotac_official.

References

• ZOTAC | Mini PCs and GeForce RTX Gaming Graphics Cards | ZOTAC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>