ZOTAC Zbox C Series CI642 Nano Gaming Graphic Card User Guide

ZOTAC Zbox C Series CI642 Nano Gaming Graphic Card User Guide

PACKAGE CONTENTS

• 1 x ZOTAC ZBOX nano
• 1 x VESA mount
• 1 x AC Adapter (optional)
• 1 x Power Cord (optional)
• 1 x Warranty Card
• 1 x Quick Start Guide
• 1 x USB drive with O/S driver
• 1 x Antenna

CUSTOMIZING YOUR ZOTAC ZBOX NANO

1. Loosen and remove the 4 thumb screws securing the bottom cover.

2. Remove the cover.
   

INSTALLING MEMORY MODULES

1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot at a 45 degree angle.

2. Gently press down on the memory module until it locks into place by the arms of the memory slot

INSTALLING A HARD DISK

1. Locate the hard disk bracket, remove the 2 screws, and remove the hard disk bracket.
   

2. Install the hard disk bracket to a 2.5-inch SATA hard disk / SSD with 2 screws.

3. Insert the hard disk /SSD into the socket and gently slide into the connector.
   

4. Reinstall the screws of the hard disk bracket.
   

FRONT PANEL

1. Power button
2. Power LED
3. SATA LED
4. WiFi LED
5. Memory card reader (SD/SDHC/SDXC)
6. Headphone/Audio Out jack
7. Microphone jack
8. USB 3.1 port
9. Thunderbolt 4 port

REAR PANEL

1. WiFi antenna connector
2. LAN (RJ45) ports
3. USB 3.1 ports
4. USB 2.0 port
5. DisplayPort
6. HDMI port
7. Power input (DC19V)

SETTING UP YOUR ZOTAC ZBOX NANO

1. Connecting antenna for Wi-Fi
2. Connecting to a wired home network
3. Connecting USB 3.1 devices
4. Connecting USB 2.0 devices
5. Connecting a DisplayPort display
6. Connecting an HDMI display
7. Connecting the power adapter and turning on the system

Facebook: facebook.com/zotac
Twitter: twitter.com/zotac
YouTube: youtube.com/zotacofficial
Vimeo: vimeo.com/zotac
Instagram: instagram.com/zotac_official

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>